【ijkplayer】解码流程梳理（三）

深碍√TFBOYSˉ_ 2024-04-08 11:14 59阅读 0赞

## ijkplayer ##

[【ijkplayer】整体结构总结（一）][ijkplayer]

[【ijkplayer】read\_thread 流程梳理（二）][ijkplayer_read_thread]

[【ijkplayer】解码流程梳理（三）][ijkplayer 1]

[【ijkplayer】渲染流程梳理（四）][ijkplayer 2]

--------------------

## 【ijkplayer】解码流程梳理（三） ##

## 视频解码——video\_thead ##

简化代码如下（删除滤镜相关代码，先不做分析）

static int video_thread(void *arg)
    {
        
        AVRational tb = is->video_st->time_base;
        AVRational frame_rate = av_guess_frame_rate(is->ic, is->video_st, NULL);
    
        for (;;) {
        
            ret = get_video_frame(is, frame); // 解码获取一帧视频画面
            if (ret < 0)// 解码结束
                goto the_end;
            if (!ret)// 没有解码得到画面
                continue;
    
            duration = (frame_rate.num && frame_rate.den ? av_q2d((AVRational){
        frame_rate.den, frame_rate.num}) : 0);// 用帧率估计帧时长
            pts = (frame->pts == AV_NOPTS_VALUE) ? NAN : frame->pts * av_q2d(tb);// 将pts转化为秒为单位
            ret = queue_picture(is, frame, pts, duration, frame->pkt_pos, is->viddec.pkt_serial);// 将解码后的帧存入FrameQueue
            av_frame_unref(frame);
    
            if (ret < 0)
                goto the_end;
        }
     the_end:
    
        av_frame_free(&frame);
        return 0;
    }

### 流程 ###

*  调用get\_video\_frame方法，获取一帧解码的视频画面，赋值到frame中
 *  计算duration和pts
 *  调用queue\_picture将解码后帧存入FrameQueue

## get\_video\_frame ##

static int get_video_frame(VideoState *is, AVFrame *frame)
    {
        
        int got_picture;
    
        if ((got_picture = decoder_decode_frame(&is->viddec, frame, NULL)) < 0)
            return -1;
    
        if (got_picture) {
        
            frame->sample_aspect_ratio = av_guess_sample_aspect_ratio(is->ic, is->video_st, frame);
        }
        // 丢帧处理
        if (got_picture) {
        
            double dpts = NAN;
    
            if (frame->pts != AV_NOPTS_VALUE)
                dpts = av_q2d(is->video_st->time_base) * frame->pts;
    
            frame->sample_aspect_ratio = av_guess_sample_aspect_ratio(is->ic, is->video_st, frame);
    
            if (ffp->framedrop>0 || (ffp->framedrop && get_master_sync_type(is) != AV_SYNC_VIDEO_MASTER)) {
        
                ffp->stat.decode_frame_count++;
                if (frame->pts != AV_NOPTS_VALUE) {
        
                    double diff = dpts - get_master_clock(is);
                    if (!isnan(diff) && fabs(diff) < AV_NOSYNC_THRESHOLD &&
                        diff - is->frame_last_filter_delay < 0 &&
                        is->viddec.pkt_serial == is->vidclk.serial &&
                        is->videoq.nb_packets) {
        
                        is->frame_drops_early++;
                        is->continuous_frame_drops_early++;
                        if (is->continuous_frame_drops_early > ffp->framedrop) {
        
                            is->continuous_frame_drops_early = 0;
                        } else {
        
                            ffp->stat.drop_frame_count++;
                            ffp->stat.drop_frame_rate = (float)(ffp->stat.drop_frame_count) / (float)(ffp->stat.decode_frame_count);
                            av_frame_unref(frame);
                            got_picture = 0;
                        }
                    }
                }
            }
        }
    
        return got_picture;
    }

### 流程 ###

*  调用decoder\_decode\_frame进行解码操作，获取解码后的数据
 *  如果解码成功，在一定条件下，进入丢帧策略

if (ffp->framedrop>0 || (ffp->framedrop && get_master_sync_type(is) != AV_SYNC_VIDEO_MASTER))
    
     {
         "framedrop",                      "drop frames when cpu is too slow",
            OPTION_OFFSET(framedrop),       OPTION_INT(0, -1, 120) },

条件满足二者其一即可

*  framedrop>0
 *  ffp->framedrop <0并且当前的同步时钟类型不是video的时候，在ffplay\_options中，默认framedrop为-1

## decoder\_decode\_frame ##

static int decoder_decode_frame(Decoder *d, AVFrame *frame, AVSubtitle *sub) {
        
        for (;;) {
        
            // 1. 流连续的情况下，不断调用avcodec_receive_frame获取解码后的frame
            if (d->queue->serial == d->pkt_serial) {
        
                do {
        
                    ret = avcodec_receive_frame(d->avctx, frame);
                    if (ret == AVERROR_EOF) {
        
                        return 0;
                    }
                    if (ret >= 0)
                        return 1;
                } while (ret != AVERROR(EAGAIN));
            }
    
            // 2. 取一个packet
            do {
        
                if (d->queue->nb_packets == 0)
                    SDL_CondSignal(d->empty_queue_cond);
                 if (d->packet_pending) {
        
                    av_packet_move_ref(&pkt, &d->pkt);
                    d->packet_pending = 0;
                }else{
        
                     if (packet_queue_get_or_buffering(d->queue, &pkt, 1, &d->pkt_serial) < 0)
                    return -1;
                 }
            } while (d->queue->serial != d->pkt_serial);
    
            // 3. 将packet送入解码器
            avcodec_send_packet(d->avctx, &pkt);
        }
    }

*  序列号相同的情况下，调用avcodec\_receive\_frame获取解码后的帧，失败跳出循环
 *  如果d->queue->nb\_packets为空，则发送SDL\_CondSignal(d->empty\_queue\_cond)信号，表示队列为空，通知读线程继续读数据，否则，调用packet\_queue\_get\_or\_buffering获取一个packet，此方法是一个阻塞方法  
    将packet送入解码器
 *  这里有一个d->packet\_pending的概念，表示在send\_packet的时候，失败的packet.

if (avcodec_send_packet(d->avctx, &pkt) == AVERROR(EAGAIN)) {
        
        av_log(d->avctx, AV_LOG_ERROR, "Receive_frame and send_packet both returned EAGAIN, which is an API violation.\n");
        d->packet_pending = 1;
        av_packet_move_ref(&d->pkt, &pkt);
    }

省略代码中还有针对`flush_pkt`的处理

if (pkt.data == flush_pkt.data) {
        
        avcodec_flush_buffers(d->avctx);
        d->finished = 0;
        d->next_pts = d->start_pts;
        d->next_pts_tb = d->start_pts_tb;
    }

了解过`PacketQueue`的代码，我们知道在往`PacketQueue`送入一个`flush_pkt`后，`PacketQueue`的`serial`值会`加1`，而送入的`flush_pkt`和`PacketQueue`的`serial`值保持一致。所以如果有“过时”Packet，过滤后，取到的第一个pkt将是flush\_pkt。  
根据分析的代码，已经可以获取到一帧解码好的数据了，接下来就需要将`frame`放入队列之中

duration = (frame_rate.num && frame_rate.den ? av_q2d((AVRational){
        frame_rate.den, frame_rate.num}) : 0);
    pts = (frame->pts == AV_NOPTS_VALUE) ? NAN : frame->pts * av_q2d(tb);
    ret = queue_picture(is, frame, pts, duration, frame->pkt_pos, is->viddec.pkt_serial);
    av_frame_unref(frame);

## queue\_picture ##

static int queue_picture(VideoState *is, AVFrame *src_frame, double pts, double duration, int64_t pos, int serial)
    {
        
        Frame *vp;
    
        if (!(vp = frame_queue_peek_writable(&is->pictq)))
            return -1;
    
        vp->sar = src_frame->sample_aspect_ratio;
        vp->uploaded = 0;
    
        vp->width = src_frame->width;
        vp->height = src_frame->height;
        vp->format = src_frame->format;
    
        vp->pts = pts;
        vp->duration = duration;
        vp->pos = pos;
        vp->serial = serial;
    
        set_default_window_size(vp->width, vp->height, vp->sar);
    
        av_frame_move_ref(vp->frame, src_frame);
        frame_queue_push(&is->pictq);
        return 0;
    }

*  frame\_queue\_peek\_writable取出当前队列的写节点
 *  简单的赋值操作，然后把该拷贝的拷贝给节点(struct Frame)保存，然后frame\_queue\_push，push节点到队列中。

`音频`/`字幕` `解码流程大同小异`，就不重复分析了。

[ijkplayer]: https://blog.csdn.net/weixin_43874301/article/details/126481256
[ijkplayer_read_thread]: https://blog.csdn.net/weixin_43874301/article/details/126481568
[ijkplayer 1]: https://blog.csdn.net/weixin_43874301/article/details/126482052
[ijkplayer 2]: https://codingce.blog.csdn.net/article/details/126483630