基于Vivado和Ego1的密码锁设计

系统管理员 2024-04-06 12:53 47阅读 0赞

目录  
一． 引言 2  
二． 实验环境 2  
三． 设计原理 2  
1.Verilog 基础 2  
2.Vivado 软件设计平台 4  
3.Ego1 硬件实验平台 4  
四． 设计方案 7  
1.密码锁端口预设 7  
2.密码锁状态分类 9  
3.密码锁开锁逻辑 10  
4.密码锁修改密码设计 13  
5.可视化设计 14  
6.管脚约束 17  
五． 实验测试与结果分析 19  
1.密码锁开锁测试 19  
2.修改密码测试 20  
3.密码锁超时锁死测试 21  
六． 设计总结 22  
七． 致谢 22  
“密码锁”系统设计报告

移动通信网络实验课程以软硬件结合的方式进行实践教学。完成 FPGA 基础实验后并要求自主设计一个完整的程序，并在硬件平台上实现逻辑功能。本次课程报告的设计以“密码锁”展开，在 Ego1 硬件平台上实现可操作的逻辑。具体将包括到基本的时钟及复位按钮，调节按钮及相应的 LED 灯来改变当前模式，一组  
LED 流水灯倒计时设计，七段数码管分段显示及实时修改数字密码并显示当前锁的状态等。  
本文转载自http://www.biyezuopin.vip/onews.asp?id=14927实验需要预先学习的知识包括Verilog HDL 语法学习，Vivado 软件使用学习，Ego1 板卡相关端口学习。  
通过本次课程的学习，下面将对“密码锁”逻辑程序的具体设计流程展开说明。 具体包括实验环境，设计原理，设计方案，实验测试与结果分析，设计总结几个部分。  
二． 实验环境  
操 作 系 统 ：Window 10； 设计软件：Vivado 2017.4； 硬件平台：Ego1；  
三． 设计原理  
1.Verilog 基础  
硬件描述语言(HDL)是一种用形式化方法来描述数字电路和设计数字逻辑系统的语言。它可以使数字逻辑电路设计者利用这种语言来描述自己的设计思想，然后利用电子设计自动化(EDA)工具进行仿真，再自动综合到门级电路， 再用 ASIC 或 FPGA 实现其功能。

`timescale 1ns / 1ps
    
    module lock(
    input sys_clk,  //总时钟
    input rst_n,    //reset重置
    //五个按钮：上下左右中
    input up_button,  
    input down_button,
    input left_button,
    input right_button,
    input middle_button,
    input mode,   //SW7开关控制模式
    output wire ledlow,     //SW7对应的LED灯
    output wire [7:0] ledbit,    //数码管显示位信息
    output wire [6:0] ledshow,   //前四位数码管每段信息
    output wire [6:0] ledshow2,  //后四位数码管每段信息
    output reg [7:0] leddown     //8个小LED灯：流水计时
    );
    
    wire [63:0] timer;
    wire [63:0] led_timer;
    wire [63:0] pwd_cng_timer;
    wire [63:0] jmp1;
    wire [63:0] jmp2;
    wire [63:0] jmp3;
    wire [63:0] jmp4;
    wire [63:0] jmp5;
    wire [63:0] jmp6;
    wire [63:0] jmp7;
    wire [63:0] jmp8;
    wire [63:0] main_timer;
    wire [63:0] left_timer;
    wire [63:0] right_timer;
    wire [63:0] up_timer;
    wire [63:0] down_timer;
    wire [63:0] middle_timer;
    
    reg lock_status;    //是否为锁住状态
    wire load_status;   //是否为修改密码状态
    wire read_status;   //是否为检验密码状态
    reg succ_status;    //是否成功解锁
    
    reg [7:0] is_jmp;   //当前选中位（实现闪烁）
    reg [7:0] choose;   //指针
    
    clock_make U1(
    .sys_clk(sys_clk),
    .rst_n(rst_n),
    .timer(timer),
    .led_timer(led_timer),
    .load_status(load_status),
    .read_status(read_status),
    .lock_status(lock_status),
    .is_jmp(is_jmp),
    .pwd_cng_timer(pwd_cng_timer),
    .middle_button(middle_button),
    .left_button(left_button),
    .right_button(right_button),
    .up_button(up_button),
    .down_button(down_button),
    .jmp1(jmp1),
    .jmp2(jmp2),
    .jmp3(jmp3),
    .jmp4(jmp4),
    .jmp5(jmp5),
    .jmp6(jmp6),
    .jmp7(jmp7),
    .jmp8(jmp8),
    .main_timer(main_timer),
    .left_timer(left_timer),
    .right_timer(right_timer),
    .up_timer(up_timer),
    .down_timer(down_timer),
    .middle_timer(middle_timer)
    );
    
    reg [7:0] numbit;    //数字显示位信息
    reg [3:0] number1;   //前四位数码管数字信息
    reg [3:0] number2;   //后四位数码管数字信息
    
    //锁密码字段4位
    reg [3:0] pwd1;      
    reg [3:0] pwd2;
    reg [3:0] pwd3;
    reg [3:0] pwd4;
    
    reg [3:0] pwds;      //当前输入密码
    
    reg [3:0] number_1;
    reg [3:0] number_2;
    reg [3:0] number_3;
    reg [3:0] number_4;
    reg [3:0] number_5;
    reg [3:0] number_6;
    reg [3:0] number_7;
    reg [3:0] number_8;
    
    digital_put U2(
    .sys_clk(sys_clk),
    .rst_n(rst_n),
    .timer(timer),
    .numbit(numbit),
    .number1(number1),
    .number2(number2),
    .ledbit(ledbit),
    .ledshow(ledshow),
    .ledshow2(ledshow2)
    );
    
    assign ledlow = mode;
    assign read_status = ~mode;
    assign load_status = mode;
    
    initial
    begin
        numbit <= 8'b11111111;
        is_jmp <= 8'b00000000;
        number1 <= 4'd0;
        number2 <= 4'd0;
        number_1 <= 4'd0;
        number_2 <= 4'd0;
        number_3 <= 4'd0;
        number_4 <= 4'd0;
        number_5 <= 4'd0;
        number_6 <= 4'd0;
        number_7 <= 4'd0;
        number_8 <= 4'd0;
        pwd1 <= 4'd1;
        pwd2 <= 4'd0;
        pwd3 <= 4'd0;
        pwd4 <= 4'd0;
        pwds <= 4'd0;
        lock_status <= 1'b0;
        succ_status <= 1'b0;
        choose <= 4'b0;
    end
    
    always@(posedge sys_clk or negedge rst_n)
    begin
        //初始化
        if(~rst_n)
        begin
            leddown <= 8'b11111111;
            lock_status = 1'b0;
        end
        //流水灯计时
        else if(read_status == 1'b1)
        begin
            if(led_timer == 64'd199_999_999) //49_999_999
                begin
                    leddown <= 8'b11111110;
                end
                else if(led_timer == 64'd399_999_999)//99_999_999
                begin
                    leddown <= 8'b11111100;
                end
                else if(led_timer == 64'd599_999_999)//149_999_999
                begin
                    leddown <= 8'b11111000;
                end
                else if(led_timer == 64'd799_999_999)//199_999_999
                begin
                    leddown <= 8'b11110000;
                end
                else if(led_timer == 64'd999_999_999)//249_999_999
                begin
                    leddown <= 8'b11100000;
                end
                else if(led_timer == 64'd1_199_999_999)//299_999_999
                begin
                    leddown <= 8'b11000000;
                end
                else if(led_timer == 64'd1_399_999_999)//349_999_999
                begin
                    leddown <= 8'b10000000;
                end
                else if(led_timer == 64'd1_599_999_999)//399_999_999
                begin
                    leddown <= 8'b00000000;
                end
                else if(led_timer == 64'd1_799_999_999)//449_999_999
                begin
                    leddown <= 8'b11111111;
                    lock_status = 1'b1;    //超时锁住
                end
            end
            
            //read_status=0 ,设置密码
            else
            begin
                leddown <= 8'b10101010;
            end
        end
    
    always@(posedge sys_clk)
    begin
        //成功解锁 -HCC
        if(succ_status == 1'b1)
        begin
            number_5 <= 4'd14;
            number_6 <= 4'd12;
            number_7 <= 4'd13;
            number_8 <= 4'd13;
        end
        else
        begin
             //未在规定时间内解锁  Fail
            if(lock_status == 1'b1)
            begin
                number_5 <= 4'd15;
                number_6 <= 4'd10;
                number_7 <= 4'd1;
                number_8 <= 4'd11;
            end
            else
            //解锁中 CALL
            begin
                number_5 <= 4'd13;
                number_6 <= 4'd10;
                number_7 <= 4'd11;
                number_8 <= 4'd11;
            end
        end
    end
    
    //左右键设置指针指向
    always@(posedge sys_clk)
    begin
        if(choose == 8'd0)
        begin
            if(right_timer == 64'd9_999_999)
            begin
                choose = 8'd1;
            end
        end
        else if(choose == 8'd1)
        begin
            if(left_timer == 64'd9_999_999)
            begin
                choose = 8'd0;
            end
            else if(right_timer == 64'd9_999_999)
            begin
                choose = 8'd2;
            end
        end
        else if(choose == 8'd2)
        begin
            if(left_timer == 64'd9_999_999)
            begin
                choose = 8'd1;
            end
            else if(right_timer == 64'd9_999_999)
            begin
                choose = 8'd3;
            end
        end
        else if(choose == 8'd3)
        begin
            if(left_timer == 64'd9_999_999)
            begin
                choose = 8'd2;
            end
        end
    end
    
    //上下键设置数值
    always@(posedge sys_clk or negedge rst_n)
    begin
        if(~rst_n)
        begin
            number_1 = 4'd0;
            number_2 = 4'd0;
            number_3 = 4'd0;
            number_4 = 4'd0;
        end
        else
        begin
            if(choose == 4'd0)
            begin
                if(up_timer == 64'd9_999_999)
                begin
                    if(number_1 < 4'd9)
                    begin
                        number_1 = number_1 + 1'b1;
                    end
                end
                if(down_timer == 64'd9_999_999)
                begin
                    if(number_1 > 4'd0)
                    begin
                        number_1 = number_1 - 1'b1;
                    end
                end
            end
            if(choose == 4'd1)
            begin
                if(up_timer == 64'd9_999_999)
                begin
                    if(number_2 < 4'd9)
                    begin
                        number_2 = number_2 + 1'b1;
                    end
                end
                if(down_timer == 64'd9_999_999)
                begin
                    if(number_2 > 4'd0)
                    begin
                        number_2 = number_2 - 1'b1;
                    end
                end
            end
            if(choose == 4'd2)
            begin
                if(up_timer == 64'd9_999_999)
                begin
                    if(number_3 < 4'd9)
                    begin
                        number_3 = number_3 + 1'b1;
                    end
                end
                if(down_timer == 64'd9_999_999)
                begin
                    if(number_3 > 4'd0)
                    begin
                        number_3 = number_3 - 1'b1;
                    end
                end
            end
            if(choose == 4'd3)
            begin
                if(up_timer == 64'd9_999_999)
                begin
                    if(number_4 < 4'd9)
                    begin
                        number_4 = number_4 + 1'b1;
                    end
                end
                if(down_timer == 64'd9_999_999)
                begin
                    if(number_4 > 4'd0)
                    begin
                        number_4 = number_4 - 1'b1;
                    end
                end
            end
        end
    end
    
    always@(posedge sys_clk or negedge rst_n)
    begin
        if(~rst_n)
        //初始密码设置和初始默输入密码
        begin
            pwd1 <= 4'd2;
            pwd2 <= 4'd0;
            pwd3 <= 4'd2;
            pwd4 <= 4'd0;
            pwds <= 4'b0000;
            succ_status <= 1'b0;
        end
        else
        begin
            if(pwd1 == number_1)
            begin
                pwds[3]=1'b1;
            end
            else
            begin
                pwds[3]=1'b0;
            end
            if(pwd2 == number_2)
            begin
                pwds[2]=1'b1;
            end
            else
            begin
                pwds[2]=1'b0;
            end
            if(pwd3 == number_3)
            begin
                pwds[1]=1'b1;
            end
            else
            begin
                pwds[1]=1'b0;
            end
            if(pwd4 == number_4)
            begin
                pwds[0]=1'b1;
            end
            else
            begin
                pwds[0]=1'b0;
            end
            //未解锁状态下
            if(lock_status == 1'b0)
            begin
                //读取状态 密码正确解锁
                if(read_status == 1'b1)
                begin
                    if(middle_timer == 64'd9_999_999)
                    begin
                        if(pwds == 4'b1111)
                        begin
                            succ_status <= 1'b1;
                        end
                        else
                        begin
                            succ_status <= 1'b0;
                        end
                    end
                end
                //非读取状态
                else
                begin
                    if(load_status == 1'b1)
                    begin
                        //加载状态下 设置密码---------------------------------------------
                        if(middle_timer == 64'd9_999_999)
                        begin
                            pwd1 <= number_1;
                            pwd2 <= number_2;
                            pwd3 <= number_3;
                            pwd4 <= number_4;
                            
                            succ_status <= 1'b0;
                        end
                    end
                end
            end
        end
    end
    
    //设置闪烁灯位置
    always@(posedge sys_clk)
    begin
        if(choose == 8'd0)
        begin
            is_jmp <= 8'b10000000;
        end
        else if(choose == 8'd1)
        begin
            is_jmp <= 8'b01000000;
        end
        else if(choose == 8'd2)
        begin
            is_jmp <= 8'b00100000;
        end
        else if(choose == 8'd3)
        begin
            is_jmp <= 8'b00010000;
        end
    end
    
    //闪烁与选中设置
    always@(posedge sys_clk or negedge rst_n)
    begin
        if(~rst_n)
        begin
            numbit <= 8'b11111111;
            number1 <= 4'd0;
            number2 <= 4'd0;
            //number_1 <= 4'd1;
            //number_2 <= 4'd2;
            //number_3 <= 4'd3;
            //number_4 <= 4'd4;
            //number_5 <= 4'd5;
            //number_6 <= 4'd6;
            //number_7 <= 4'd7;
            //number_8 <= 4'd8;
        end
        else if(timer <= 64'd249999)
        begin
            numbit = 8'b10001000;
            if(is_jmp[7] == 1'b1)
            begin
                if(jmp1 <= 50000000)
                begin
                    number1 = number_1;
                end
                else
                begin
                    numbit[7] = 1'b0;
                end
            end
            else
            begin
                number1 = number_1;
            end
            if(is_jmp[3] == 1'b1)
            begin
                if(jmp5 <= 50000000)
                begin
                    number2 = number_5;
                end
                else
                begin
                    numbit[3] = 1'b0;
                end
            end
            else
            begin
                number2 = number_5;
            end
        end
        else if(timer <= 64'd499999)
        begin
            numbit = 8'b01000100;
            if(is_jmp[6] == 1'b1)
            begin
                if(jmp2 <= 50000000)
                begin
                    number1 = number_2;
                end
                else
                begin
                    numbit[6] = 1'b0;
                end
            end
            else
            begin
                number1 = number_2;
            end
            if(is_jmp[2] == 1'b1)
            begin
                if(jmp6 <= 50000000)
                begin
                    number2 = number_6;
                end
                else
                begin
                    numbit[2] = 1'b0;
                end
            end
            else
            begin
                number2 = number_6;
            end
        end
        else if(timer <= 64'd749999)
        begin
            numbit = 8'b00100010;
            if(is_jmp[5] == 1'b1)
            begin
                if(jmp3 <= 50000000)
                begin
                    number1 = number_3;
                end
                else
                begin
                    numbit[5] = 1'b0;
                end
            end
            else
            begin
                number1 = number_3;
            end
            if(is_jmp[1] == 1'b1)
            begin
                if(jmp7 <= 50000000)
                begin
                    number2 = number_7;
                end
                else
                begin
                    numbit[1] = 1'b0;
                end
            end
            else
            begin
                number2 = number_7;
            end
        end
        else if(timer <= 64'd999999)
        begin
            numbit = 8'b00010001;
            if(is_jmp[4] == 1'b1)
            begin
                if(jmp4 <= 50000000)
                begin
                    number1 = number_4;
                end
                else
                begin
                    numbit[4] = 1'b0;
                end
            end
            else
            begin
                number1 = number_4;
            end
            if(is_jmp[0] == 1'b1)
            begin
                if(jmp8 <= 50000000)
                begin
                    number2 = number_8;
                end
                else
                begin
                    numbit[0] = 1'b0;
                end
            end
            else
            begin
                number2 = number_8;
            end
        end
    end
    
    endmodule

![在这里插入图片描述][1735550cd9ee4ab392b63031989926e5.png_pic_center]  
![在这里插入图片描述][a18b5c186c6f40faba70a97f0e956793.png_pic_center]  
![在这里插入图片描述][cfbdb60cecda4b23b1ef704f46823260.png_pic_center]  
![在这里插入图片描述][efc1d7bbc9d1407a9932051f2fb3e06f.png_pic_center]  
![在这里插入图片描述][8d2cbd7661504d0dab62014930c97ac6.png_pic_center]  
![在这里插入图片描述][ec377a5bf7144481a82994b9ecb14a25.png_pic_center]  
![在这里插入图片描述][6fbe6f90025540269fc31887c7324382.png_pic_center]  
![在这里插入图片描述][1428d8fd46f14c5c99107cbb163bb691.png_pic_center]  
![在这里插入图片描述][e7bcb90b8ad24934b4bb22165c239024.png_pic_center]

[1735550cd9ee4ab392b63031989926e5.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/d9d8521d435a41028be011b6cf3b8810.png
[a18b5c186c6f40faba70a97f0e956793.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/cc3cf308638046d6ba5738e14c268c2a.png
[cfbdb60cecda4b23b1ef704f46823260.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/f19537b3c43049099115f40d63f0bc24.png
[efc1d7bbc9d1407a9932051f2fb3e06f.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/6832e5805b764bb5be07287c7b2c018e.png
[8d2cbd7661504d0dab62014930c97ac6.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/f64e0fdad58e4ecf8f660721afd46d3f.png
[ec377a5bf7144481a82994b9ecb14a25.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/f0f409d3245c40aa952de67bbf533882.png
[6fbe6f90025540269fc31887c7324382.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/8413eb2f00de4e679c63d8134a36377c.png
[1428d8fd46f14c5c99107cbb163bb691.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/f1fc0dfbe5d5432a85893f7911f4d103.png
[e7bcb90b8ad24934b4bb22165c239024.png_pic_center]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/06/23c0720c50ba4741bfd3cb7d4718f73e.png