Tippecanoe矢量切片

古城微笑少年丶 2021-09-21 01:34 681阅读 0赞

### 源代码名称:**tippecanoe** ###

### 源代码网址:[http://www.github.com/mapbox/tippecanoe][http_www.github.com_mapbox_tippecanoe] ###

### [tippecanoe源代码文档][tippecanoe] ###

### [tippecanoe源代码下载][tippecanoe 1] ###

使用 [GeoJSON][]数据创建 [矢量瓦片][Link 1]

## 目的 ##

根据你的数据创造一个可自由缩放的视图

## 安装 ##

最简单的安装方式是在OSX使用 [Homebrew][]:

$ brew install tippecanoe

也可以直接下载源码包，然后通过make && make install直接编译安装。

## 用法 ##

$ tippecanoe -o file.mbtiles [file.json ...]

如果没有指定GeoJSON文件，它将会从标准输入读取。   
如果指定了多个文件，每个文件都会创建一个对应的图层。

## 选项 ##

tippecanoe提供了众多选项。大多数时候不需要指定额外的选项参数，只需要通过 `-o` *output*`.mbtiles` 指定输出文件名，或者 `-f` 来删除已经存在的文件。

如果你不确定所使用数据的最大级别，可以使用 `-zg` 来根据数据密度自动估算一个级别。

如果你的数据包含点状要素，通常需要使用`-Bg`来自动计算一个基准级别做数据抽稀。如果这种方式对你无效，可以尝试使用`-r1 --drop-fraction-as-needed` 关闭传统的抽稀方法，而仅仅在瓦片太大时才做抽稀。

如果你的数据包含点状要素或面状要素，你可能需要使用`--drop-densest-as-needed` 来舍弃一些要素，让其可以在低级别显示。

如果你的数据包含大量的属性信息，可以使用`-y` 来指定你需要的属性。

**瓦片输出**

*  `-o` *file*`.mbtiles` 或者 `--output=`*file*`.mbtiles`： 指定输出文件名称
 *  `-e` *directory* 或者 `--output-to-directory`=*directory*： 将瓦片文件输出到指定的*directory* 文件夹，而不是mbtiles
 *  `-f` 或者 `--force`： 如果指定的mbtiles已存在，则删除，否则抛出错误
 *  `-F` 或者 `--allow-existing`： 忽略元数据或瓦片已存在的情况，一般不推荐使用

### 瓦片描述和权属信息 ###

*  `-n` *name* 或者 `--name=`*name*：瓦片集的名称
 *  `-A` *text* 或者 `--attribution=`*text*：使用瓦片数据时，显示在地图上的权属信息 (HTML格式)
 *  `-N` *description* 或者 `--description=`*description*： 瓦片集的描述信息 (默认 file.mbtiles)

### 输入文件和图层名 ###

*  *name*`.json` 或者 *name*`.geojson`： 读取指定的文件到一个名为name的图层
 *  `-l` *name* 或者 `--layer=`*name*：使用指定的图层名，如果输入的有多个文件，则这些文件将会被合并到一个图层
 *  `-L` *name*`:`*file.json* 或者 `--named-layer=`*name*`:`*file.json*： 为每一个单独的文件指定一个图层名

### 输入文件的并行处理 ###

*  `-P` 或者 `--read-parallel`: 使用多线程读取一个文件的不同部分   
    该选项只对新行分隔（每个要素为一行）的json文件有效。否则将会返回一个“EOF”错误。

### 输入文件的投影 ###

*  `-s` *projection* 或者 `--projection=`*projection*：为输入的数据指定一个投影。目前仅支持 `EPSG:4326` (WGS84, 默认) 和 `EPSG:3857` (Web墨卡托)。

### 缩放级别 ###

*  `-z` *zoom* 或者 `--maximum-zoom=`*zoom*：切片的最大级别（默认14）
 *  `-zg` 或者 `--maximum-zoom=g`： 根据要素分布自动估算最大级别
 *  `-Z` *zoom* 或者 `--minimum-zoom=`*zoom*：切片的最小级别（默认0）

### 瓦片分辨率 ###

*  `-d` *detail* 或者 `--full-detail=`*detail*： 在最大级别时的“详细程度” (默认 12, 对应的分辨率为4096)
 *  `-D` *detail* 或者 `--low-detail=`*detail*：在最大级别时的“详细程度”(默认 12, 对应的分辨率为4096)
 *  `-m` *detail* 或者 `--minimum-detail=`*detail*： “详细程度”下限，如果在标准“详细程度”下瓦片太大将会尝试的最小“详细程度” (默认 7，对应的分辨率为128)

All internal math is done in terms of a 32-bit tile coordinate system, so 1/(2^32) of the size of Earth,   
or about 1cm, is the smallest distinguishable distance. If *maxzoom* + *detail* > 32, no additional   
resolution is obtained than by using a smaller *maxzoom* or *detail*.

### 过滤要素属性 ###

*  `-x` *name* 或者 `--exclude=`*name*： 剔除的属性字段
 *  `-y` *name* 或者 `--include=`*name*： 包含的属性字段，其他字段都将被剔除
 *  `-X` 或者 `--exclude-all`: 剔除所有字段，仅仅编码“geometry”字段
 *  `-T`*attribute*`:`*type* 或者 `--attribute-type=`*attribute*`:`*type*: 强制将要素的 *attribute* 属性类型转换为指定的 *type* 类型。   
    *type* 的取值范围： `string`, `float`, `int`, 或 `bool`。 如果是 `bool`，那么原始属性中的`0`、 `false`、 `null`、或者空字符串都会被转为`false`，其它都被转为 `true`。 如果是 `float` 或 `int` 并且原始数据为非数字，则会被转为`0`。如果是 `int` 并且原始数据为浮点型，将会被转为与其最接近的整数。

### 根据缩放级别舍弃部分要素 ###

*  `-r` *rate* 或者 `--drop-rate=`*rate*： 在基准级别以下的瓦片中被舍弃的点的比例(默认 2.5)。 如果使用 `-rg`，将会估算一个弃置比，保持瓦片中最多包含50,000个要素。同时也可以使用`-rg`*width* 指定一个注记宽度来允许瓦片中保持较少的要素，以适应较大的注记或标记，也可以使用`-rf`*number* 来设置瓦片中最多包含的要素数量。
 *  `-B` *zoom* 或者 `--base-zoom=`*zoom*：基准级别，基准级别及以上的瓦片将不做点状数据的抽稀 (默认为最大级别）。 如果使用了 `-Bg`， 将会根据最大要素数50,000估算基准级别。同时也可以使用`-Bg`*width*指定一个注记宽度来允许瓦片中保持较少的要素，以适应较大的注记或标记，也可以使用`-Bf`*number*来设置瓦片中最多包含的要素数量。
 *  `-al` 或者 `--drop-lines`： 让线要素跟点要素一样，在低级别做数据抽稀
 *  `-ap` 或者 `--drop-polygons`: 让面要素跟点要素一样，在低级别做数据抽稀

### 舍弃一小部分要素来保持瓦片大小不超限 ###

*  `-as` 或者`--drop-densest-as-needed`：如果瓦片太大，尝试增加要素之间的最小间隔来将瓦片大小控制在500kb以下。这种显示间距将会被应用到所有级别的瓦片。
 *  `-ad` 或者 `--drop-fraction-as-needed`：从每一个级别动态舍弃一部分要素来保持瓦片大小不超过500kb限制。 (类似于`-pd` ，但是是应用于整个级别，而不是每一个瓦片)
 *  `-an` 或者 `--drop-smallest-as-needed`：从每一个级别动态舍弃最小的要素(物理上的最小：最短的线或最小的面)来保持瓦片大小不超过500kb限制。 该选项对点状要素无效。
 *  `-pd` 或者 `--force-feature-limit`： 动态舍弃部分要素来保持瓦片大小不超过500kb限制(该选项与 `-ad` 类似，但是是针对每个单独的瓦片，而不是整个缩放级别)。该选项可能会导致瓦片边界区域比较难看，一般情况不建议使用。

### 舍弃紧密交错的要素 ###

*  `-g` *gamma* 或者 `--gamma=_gamma`\_：特别密集的点将会被丢弃的比例 (默认 0，不丢弃)。gamma值为2表示减少小于一个像素的点，直到其数量减少到原始数量的平方根（译者注：不确定该翻译是否准确）。
 *  `-aG` 或者 `--increase-gamma-as-needed`：如果瓦片太大，尝试使用`-g`增加gamma值来将瓦片大小控制在500kb以下。这个gamma值将会被应用到整个缩放级别，一般情况下会使用 `--drop-densest-as-needed`代替该命令。

### 线和面的简化 ###

*  `-S` *scale* 或者 `--simplification=`*scale*：Multiply the tolerance for line and polygon simplification by *scale*. The standard tolerance tries to keep   
    the line or polygon within one tile unit of its proper location. You can probably go up to about 10 without too much visible difference.
 *  `-ps` 或者 `--no-line-simplification`: 禁止简化线和面
 *  `-pS` 或者 `--simplify-only-low-zooms`: 禁止在最大级别简化线和面 (在低级别仍然执行简化)
 *  `-pt` 或者 `--no-tiny-polygon-reduction`: Don’t combine the area of very small polygons into small squares that represent their combined area.

### 尝试改善多边形的公共边 ###

*  `-ab` 或者 `--detect-shared-borders`: In the manner of [TopoJSON][], detect borders that are shared between multiple polygons and simplify them identically in each polygon. This takes more time and memory than considering each polygon individually.
 *  `-aL` or `--grid-low-zooms`: At all zoom levels below *maxzoom*, snap all lines and polygons to a stairstep grid instead of allowing diagonals. You will also want to specify a tile resolution, probably `-D8`. This option provides a way to display continuous parcel, gridded, or binned data at low zooms without overwhelming the tiles with tiny polygons, since features will either get stretched out to the grid unit or lost entirely, depending on how they happened to be aligned in the original data. You probably don’t want to use this.

### Controlling clipping to tile boundaries ###

*  `-b` *pixels* or `--buffer=`*pixels*: Buffer size where features are duplicated from adjacent tiles. Units are “screen pixels”—1/256th of the tile width or height. (default 5)
 *  `-pc` or `--no-clipping`: Don’t clip features to the size of the tile. If a feature overlaps the tile’s bounds or buffer at all, it is included completely. Be careful: this can produce very large tilesets, especially with large polygons.
 *  `-pD` or `--no-duplication`: As with `--no-clipping`, each feature is included intact instead of cut to tile boundaries. In addition, it is included only in a single tile per zoom level rather than potentially in multiple copies. Clients of the tileset must check adjacent tiles (possibly some distance away) to ensure they have all features.

### Reordering features within each tile ###

*  `-pi` or `--preserve-input-order`: Preserve the original input order of features as the drawing order instead of ordering geographically. (This is implemented as a restoration of the original order at the end, so that dot-dropping is still geographic, which means it also undoes `-ao`).
 *  `-ao` or `--reorder`: Reorder features to put ones with the same properties in sequence, to try to get them to coalesce. You probably don’t want to use this.
 *  `-ac` or `--coalesce`: Coalesce adjacent line and polygon features that have the same properties. You probably don’t want to use this.
 *  `-ar` or `--reverse`: Try reversing the directions of lines to make them coalesce and compress better. You probably don’t want to use this.

### 添加可计算的属性 ###

*  `-ag` 或者 `--calculate-feature-density`：添加一个新属性， `tippecanoe_feature_density`, to each feature, to record how densely features are spaced in that area of the tile. You can use this attribute in the style to produce a glowing effect where points are densely packed. It can range from 0 in the sparsest areas to 255 in the densest.

### 尝试修复损坏的数据源 ###

*  `-aw` 或者 `--detect-longitude-wraparound`： Detect when adjacent points within a feature jump to the other side of the world, and try to fix the geometry.

### 设置或取消瓦片大小限制 ###

*  `-M` *bytes* or `--maximum-tile-bytes=`*bytes*: Use the specified number of *bytes* as the maximum compressed tile size instead of 500K.
 *  `-pf` or `--no-feature-limit`: Don’t limit tiles to 200,000 features
 *  `-pk` or `--no-tile-size-limit`: Don’t limit tiles to 500K bytes
 *  `-pC` or `--no-tile-compression`: Don’t compress the PBF vector tile data.

### Temporary storage ###

*  `-t` *directory* or `--temporary-directory=`*directory*: Put the temporary files in *directory*.   
    If you don’t specify, it will use `/tmp`.

### Progress indicator ###

*  `-q` or `--quiet`: Work quietly instead of reporting progress

## Environment ##

Tippecanoe ordinarily uses as many parallel threads as the operating system claims that CPUs are available.   
You can override this number by setting the `TIPPECANOE_MAX_THREADS` environmental variable.

## Example ##

$ tippecanoe -o alameda.mbtiles -l alameda -n "Alameda County from TIGER" -z13 tl_2014_06001_roads.json

$ cat tiger/tl_2014_*_roads.json | tippecanoe -o tiger.mbtiles -l roads -n "All TIGER roads, one zoom" -z12 -Z12 -d14 -x LINEARID -x RTTYP

## GeoJSON extension ##

Tippecanoe defines a GeoJSON extension that you can use to specify the minimum and/or maximum zoom level   
at which an individual feature will be included in the vector tileset being produced.   
If you have a feature like this:

{
    
    "type" : "Feature",
    
    "tippecanoe" : { "maxzoom" : 9, "minzoom" : 4 },
    
    "properties" : { "FULLNAME" : "N Vasco Rd" },
    
    "geometry" : {
    
    "type" : "LineString",
    
    "coordinates" : [ [ -121.733350, 37.767671 ], [ -121.733600, 37.767483 ], [ -121.733131, 37.766952 ] ]
    
    }
    
    }

with a `tippecanoe` object specifiying a `maxzoom` of 9 and a `minzoom` of 4, the feature   
will only appear in the vector tiles for zoom levels 4 through 9. Note that the `tippecanoe`   
object belongs to the Feature, not to its `properties`. If you specify a `minzoom` for a feature,   
it will be preserved down to that zoom level even if dot-dropping with `-r` would otherwise have   
dropped it.

You can also specify a layer name in the `tippecanoe` object, which will take precedence over   
the filename or name specified using `--layer`, like this:

{
    
    "type" : "Feature",
    
    "tippecanoe" : { "layer" : "streets" },
    
    "properties" : { "FULLNAME" : "N Vasco Rd" },
    
    "geometry" : {
    
    "type" : "LineString",
    
    "coordinates" : [ [ -121.733350, 37.767671 ], [ -121.733600, 37.767483 ], [ -121.733131, 37.766952 ] ]
    
    }
    
    }

## Point styling ##

To provide a consistent density gradient as you zoom, the Mapbox Studio style needs to be   
coordinated with the base zoom level and dot-dropping rate. You can use this shell script to   
calculate the appropriate marker-width at high zoom levels to match the fraction of dots   
that were dropped at low zoom levels.

If you used `-B` or `-z` to change the base zoom level or `-r` to change the   
dot-dropping rate, replace them in the `basezoom` and `rate` below.

awk 'BEGIN {
    
    dotsize = 2; # up to you to decide
    
    basezoom = 14; # tippecanoe -z 14
    
    rate = 2.5; # tippecanoe -r 2.5
    
    
    print " marker-line-width: 0;";
    
    print " marker-ignore-placement: true;";
    
    print " marker-allow-overlap: true;";
    
    print " marker-width: " dotsize ";";
    
    for (i = basezoom + 1; i <= 22; i++) {
    
    print " [zoom >= " i "] { marker-width: " (dotsize * exp(log(sqrt(rate)) * (i - basezoom))) "; }";
    
    }
    
    
    exit(0);
    
    }'

## Geometric simplifications ##

At every zoom level, line and polygon features are subjected to Douglas-Peucker   
simplification to the resolution of the tile.

For point features, it drops 1/2.5 of the dots for each zoom level above the   
point base zoom (which is normally the same as the `-z` max zoom, but can be   
a different zoom specified with `-B` if you have precise but sparse data).   
I don’t know why 2.5 is the appropriate number, but the densities of many different   
data sets fall off at about this same rate. You can use -r to specify a different rate.

You can use the gamma option to thin out especially dense clusters of points.   
For any area where dots are closer than one pixel together (at whatever zoom level),   
a gamma of 3, for example, will reduce these clusters to the cube root of their original density.

For line features, it drops any features that are too small to draw at all.   
This still leaves the lower zooms too dark (and too dense for the 500K tile limit,   
in some places), so I need to figure out an equitable way to throw features away.

Unless you specify `--no-tiny-polygon-reduction`,   
any polygons that are smaller than a minimum area (currently 4 square subpixels) will   
have their probability diffused, so that some of them will be drawn as a square of   
this minimum size and others will not be drawn at all, preserving the total area that   
all of them should have had together.

Features in the same tile that share the same type and attributes are coalesced   
together into a single geometry if you use `--coalesce`. You are strongly encouraged to use -x to exclude   
any unnecessary properties to reduce wasted file size.

If a tile is larger than 500K, it will try encoding that tile at progressively   
lower resolutions before failing if it still doesn’t fit.

## Development ##

Requires sqlite3 and zlib (should already be installed on MacOS). Rebuilding the manpage   
uses md2man (`gem install md2man`).

Linux:

sudo apt-get install build-essential libsqlite3-dev zlib1g-dev

Then build:

make

and perhaps

make install

Tippecanoe now requires features from the 2011 C++ standard. If your compiler is older than   
that, you will need to install a newer one. On MacOS, updating to the lastest XCode should   
get you a new enough version of `clang++`. On Linux, you should be able to upgrade `g++` with

sudo add-apt-repository -y ppa:ubuntu-toolchain-r/test
    
    sudo apt-get update -y
    
    sudo apt-get install -y g++-5
    
    export CXX=g++-5

## Examples ##

Check out [some examples of maps made with tippecanoe][]

## Name ##

The name is [a joking reference][] to a “tiler” for making map tiles.

# tile-join #

Tile-join is a tool for joining new attributes from a CSV file to features that   
have already been tiled with tippecanoe. It reads the tiles from an existing .mbtiles   
file, matches them against the records of the CSV, and writes out a new tileset.

If you specify multiple source mbtiles files, they are all read and their combined   
contents are written to the new mbtiles output. If they define the same layers or   
the same tiles, the layers or tiles are merged.

The options are:

*  `-o` *out.mbtiles*: Write the new tiles to the specified .mbtiles file
 *  `-f`: Remove *out.mbtiles* if it already exists
 *  `-c` *match*`.csv`: Use *match*`.csv` as the source for new attributes to join to the features. The first line of the file should be the key names; the other lines are values. The first column is the one to match against the existing features; the other columns are the new data to add.
 *  `-x` *key*: Remove attributes of type *key* from the output. You can use this to remove the field you are matching against if you no longer need it after joining, or to remove any other attributes you don’t want.
 *  `-i`: Only include features that matched the CSV.
 *  `-pk`: Don’t skip tiles larger than 500K.
 *  `-l` *layer*: Include the named layer in the output. You can specify multiple `-l` options to keep multiple layers. If you don’t specify, they will all be retained.
 *  `-L` *layer*: Remove the named layer from the output. You can specify multiple `-L` options to remove multiple layers.

Because tile-join just copies the geometries to the new .mbtiles without processing them   
(except to rescale the extents if necessary),   
it doesn’t have any of tippecanoe’s recourses if the new tiles are bigger than the 500K tile limit.   
If a tile is too big and you haven’t specified `-pk`, it is just left out of the new tileset.

## Example ##

Imagine you have a tileset of census blocks:

curl -O http://www2.census.gov/geo/tiger/TIGER2010/TABBLOCK/2010/tl_2010_06001_tabblock10.zip
    
    unzip tl_2010_06001_tabblock10.zip
    
    ogr2ogr -f GeoJSON tl_2010_06001_tabblock10.json tl_2010_06001_tabblock10.shp
    
    ./tippecanoe -o tl_2010_06001_tabblock10.mbtiles tl_2010_06001_tabblock10.json
    
    and a CSV of their populations:
    
    
    curl -O http://www2.census.gov/census_2010/01-Redistricting_File--PL_94-171/California/ca2010.pl.zip
    
    unzip -p ca2010.pl.zip cageo2010.pl |
    
    awk 'BEGIN {
    
    print "GEOID10,population"
    
    }
    
    (substr($0, 9, 3) == "750") {
    
    print "\"" substr($0, 28, 2) substr($0, 30, 3) substr($0, 55, 6) substr($0, 62, 4) "\"," (0 + substr($0, 328, 9))
    
    }' > population.csv

1.  which looks like this:

GEOID10,population
    
    "060014277003018",0
    
    "060014283014046",0
    
    "060014284001020",0
    
    ...
    
    "060014507501001",202
    
    "060014507501002",119
    
    "060014507501003",193
    
    "060014507501004",85
    
    ...
    
    
    GEOID10,population
    
    "060014277003018",0
    
    "060014283014046",0
    
    "060014284001020",0
    
    ...
    
    "060014507501001",202
    
    "060014507501002",119
    
    "060014507501003",193
    
    "060014507501004",85
    
    ...

Then you can join those populations to the geometries and discard the no-longer-needed ID field:

./tile-join -o population.mbtiles -x GEOID10 -c population.csv tl_2010_06001_tabblock10.mbtiles

# tippecanoe-enumerate #

The `tippecanoe-enumerate` utility lists the tiles that an `mbtiles` file defines.   
Each line of the output lists the name of the `mbtiles` file and the zoom, x, and y   
coordinates of one of the tiles. It does basically the same thing as

select zoom_level, tile_column, (1 << zoom_level) - 1 - tile_row from tiles;

on the file in sqlite3.

# tippecanoe-decode #

The `tippecanoe-decode` utility turns vector mbtiles back to GeoJSON. You can use it either   
on an entire file:

tippecanoe-decode file.mbtiles

or on an individual tile:

tippecanoe-decode file.mbtiles zoom x y
    
    tippecanoe-decode file.vector.pbf zoom x y

If you decode an entire file, you get a nested `FeatureCollection` identifying each   
tile and layer separately. Note that the same features generally appear at all zooms,   
so the output for the file will have many copies of the same features at different   
resolutions.

### Options ###

*  `-t` *projection*: Specify the projection of the output data. Currently supported are EPSG:4326 (WGS84, the default) and EPSG:3857 (Web Mercator).
 *  `-z` *maxzoom*: Specify the highest zoom level to decode from the tileset
 *  `-Z` *minzoom*: Specify the lowest zoom level to decode from the tileset
 *  `-l` *layer*: Decode only layers with the specified names. (Multiple `-l` options can be specified.)

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE4Mjk4NDM5_size_16_color_FFFFFF_t_70][]

[http_www.github.com_mapbox_tippecanoe]: http://www.github.com/mapbox/tippecanoe
[tippecanoe]: http://www.github.com/mapbox/tippecanoe/wiki
[tippecanoe 1]: http://www.github.com/mapbox/tippecanoe/releases
[GeoJSON]: http://geojson.org/
[Link 1]: https://www.mapbox.com/developers/vector-tiles/
[Homebrew]: http://brew.sh/
[TopoJSON]: https://github.com/mbostock/topojson/wiki/Introduction
[some examples of maps made with tippecanoe]: http://blog.csdn.net/wan_yanyan528/article/details/MADE_WITH.md
[a joking reference]: http://en.wikipedia.org/wiki/Tippecanoe_and_Tyler_Too
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE4Mjk4NDM5_size_16_color_FFFFFF_t_70]: /images/20210920/789d4d70dc7a40cb92f03ba67db81bf0.png