PythonOCC基础使用：opencascade三维建模命令——一个链轮的绘制（很重要）

深藏阁楼爱情的钟 2021-11-29 10:48 1504阅读 0赞

先上效果图：  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80Mjc1NTM4NA_size_16_color_FFFFFF_t_70]

import sys
    from math import pi as M_PI, sin, cos, atan
    
    from OCC.Core.gp import (gp_Pnt2d, gp_Ax2d, gp_Dir2d, gp_Circ2d, gp_Origin2d, gp_DX2d,
                             gp_Ax2, gp_OX2d, gp_Lin2d, gp_Trsf, gp_XOY,
                             gp_Pnt, gp_Vec, gp_Ax3, gp_Pln, gp_Origin, gp_DX, gp_DY,
                             gp_DZ, gp_OZ)
    from OCC.Core.GCE2d import GCE2d_MakeArcOfCircle, GCE2d_MakeCircle, GCE2d_MakeLine
    from OCC.Core.Geom2dAPI import Geom2dAPI_InterCurveCurve
    from OCC.Core.Geom2d import Geom2d_TrimmedCurve
    from OCC.Core.GeomAPI import geomapi_To3d
    from OCC.Core.BRepBuilderAPI import (BRepBuilderAPI_MakeEdge,
                                         BRepBuilderAPI_MakeWire,
                                         BRepBuilderAPI_MakeFace,
                                         BRepBuilderAPI_Transform)
    from OCC.Core.BRepPrimAPI import (BRepPrimAPI_MakePrism, BRepPrimAPI_MakeRevol,
                                      BRepPrimAPI_MakeCylinder, BRepPrimAPI_MakeCone)
    from OCC.Core.GccAna import GccAna_Circ2d2TanRad
    from OCC.Core.BRepAlgoAPI import BRepAlgoAPI_Cut, BRepAlgoAPI_Fuse
    from OCC.Core.BRepFilletAPI import BRepFilletAPI_MakeFillet2d
    from OCC.Core.BRepTools import BRepTools_WireExplorer
    from OCC.Display.SimpleGui import init_display
    
    roller_diameter = 10.2
    pitch = 15.875
    num_teeth = 40
    chain_width = 6.35
    
    # Dimensions derived from the provided inputs
    roller_radius = roller_diameter / 2.
    tooth_angle = (2 * M_PI) / num_teeth
    pitch_circle_diameter = pitch / sin(tooth_angle / 2.)
    pitch_circle_radius = pitch_circle_diameter / 2.
    
    roller_contact_angle_min = (M_PI * 120 / 180) - ((M_PI / 2.) / num_teeth)
    roller_contact_angle_max = (M_PI * 140 / 180) - ((M_PI / 2.) / num_teeth)
    roller_contact_angle = (roller_contact_angle_min + roller_contact_angle_max) / 2.
    
    tooth_radius_min = 0.505 * roller_diameter
    tooth_radius_max = tooth_radius_min + (0.069 * pow(roller_diameter, 1.0 / 3.0))
    tooth_radius = (tooth_radius_min + tooth_radius_max) / 2.
    
    profile_radius = 0.12 * roller_diameter * (num_teeth + 2)
    top_diameter = pitch_circle_diameter + ((1 - (1.6 / num_teeth)) * pitch) - roller_diameter
    top_radius = top_diameter / 2.
    
    thickness = chain_width * 0.95
    
    # Center hole data
    center_radius = 125.0 / 2.
    
    # Mounting hole data
    mounting_hole_count = 6
    mounting_radius = 153.0 / 2.
    hole_radius = 8.5 / 2.
    
    
    def build_tooth():
        base_center = gp_Pnt2d(pitch_circle_radius + (tooth_radius - roller_radius), 0)
        base_circle = gp_Circ2d(gp_Ax2d(base_center, gp_Dir2d()), tooth_radius)
        trimmed_base = GCE2d_MakeArcOfCircle(base_circle,
                                             M_PI - (roller_contact_angle / 2.),
                                             M_PI).Value()
        trimmed_base.Reverse()  # just a trick
        p0 = trimmed_base.StartPoint()
        p1 = trimmed_base.EndPoint()
    
        # Determine the center of the profile circle
        x_distance = cos(roller_contact_angle / 2.) * (profile_radius + tooth_radius)
        y_distance = sin(roller_contact_angle / 2.) * (profile_radius + tooth_radius)
        profile_center = gp_Pnt2d(pitch_circle_radius - x_distance, y_distance)
    
        # Construct the profile circle gp_Circ2d
        profile_circle = gp_Circ2d(gp_Ax2d(profile_center, gp_Dir2d()),
                                   profile_center.Distance(p1))
        geom_profile_circle = GCE2d_MakeCircle(profile_circle).Value()
    
        # Construct the outer circle gp_Circ2d
        outer_circle = gp_Circ2d(gp_Ax2d(gp_Pnt2d(0, 0), gp_Dir2d()), top_radius)
        geom_outer_circle = GCE2d_MakeCircle(outer_circle).Value()
    
        inter = Geom2dAPI_InterCurveCurve(geom_profile_circle, geom_outer_circle)
        num_points = inter.NbPoints()
        assert isinstance(p1, gp_Pnt2d)
        if num_points == 2:
            if p1.Distance(inter.Point(1)) < p1.Distance(inter.Point(2)):
                p2 = inter.Point(1)
            else:
                p2 = inter.Point(2)
        elif num_points == 1:
            p2 = inter.Point(1)
        else:
            sys.exit(-1)
    
        # Trim the profile circle and mirror
        trimmed_profile = GCE2d_MakeArcOfCircle(profile_circle, p1, p2).Value()
    
        # Calculate the outermost point
        p3 = gp_Pnt2d(cos(tooth_angle / 2.) * top_radius,
                      sin(tooth_angle / 2.) * top_radius)
    
        # and use it to create the third arc
        trimmed_outer = GCE2d_MakeArcOfCircle(outer_circle, p2, p3).Value()
    
        # Mirror and reverse the three arcs
        mirror_axis = gp_Ax2d(gp_Origin2d(), gp_DX2d().Rotated(tooth_angle / 2.))
    
        mirror_base = Geom2d_TrimmedCurve.DownCast(trimmed_base.Copy())
        mirror_profile = Geom2d_TrimmedCurve.DownCast(trimmed_profile.Copy())
        mirror_outer = Geom2d_TrimmedCurve.DownCast(trimmed_outer.Copy())
    
        mirror_base.Mirror(mirror_axis)
        mirror_profile.Mirror(mirror_axis)
        mirror_outer.Mirror(mirror_axis)
    
        mirror_base.Reverse()
        mirror_profile.Reverse()
        mirror_outer.Reverse()
    
        # Replace the two outer arcs with a single one
        outer_start = trimmed_outer.StartPoint()
        outer_mid = trimmed_outer.EndPoint()
        outer_end = mirror_outer.EndPoint()
    
        outer_arc = GCE2d_MakeArcOfCircle(outer_start, outer_mid, outer_end).Value()
    
        # Create an arc for the inside of the wedge
        inner_circle = gp_Circ2d(gp_Ax2d(gp_Pnt2d(0, 0), gp_Dir2d()),
                                 top_radius - roller_diameter)
        inner_start = gp_Pnt2d(top_radius - roller_diameter, 0)
        inner_arc = GCE2d_MakeArcOfCircle(inner_circle, inner_start, tooth_angle).Value()
        inner_arc.Reverse()
    
        # Convert the 2D arcs and two extra lines to 3D edges
        plane = gp_Pln(gp_Origin(), gp_DZ())
        arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_base, plane)).Edge()
        arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_profile, plane)).Edge()
        arc3 = BRepBuilderAPI_MakeEdge(geomapi_To3d(outer_arc, plane)).Edge()
        arc4 = BRepBuilderAPI_MakeEdge(geomapi_To3d(mirror_profile, plane)).Edge()
        arc5 = BRepBuilderAPI_MakeEdge(geomapi_To3d(mirror_base, plane)).Edge()
    
        p4 = mirror_base.EndPoint()
        p5 = inner_arc.StartPoint()
    
        lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
                                       gp_Pnt(p5.X(), p5.Y(), 0)).Edge()
        arc6 = BRepBuilderAPI_MakeEdge(geomapi_To3d(inner_arc, plane)).Edge()
    
        p6 = inner_arc.EndPoint()
        lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p6.X(), p6.Y(), 0),
                                       gp_Pnt(p0.X(), p0.Y(), 0)).Edge()
    
        wire = BRepBuilderAPI_MakeWire(arc1)
        wire.Add(arc2)
        wire.Add(arc3)
        wire.Add(arc4)
        wire.Add(arc5)
        wire.Add(lin1)
        wire.Add(arc6)
        wire.Add(lin2)
    
        face = BRepBuilderAPI_MakeFace(wire.Wire())
    
        wedge = BRepPrimAPI_MakePrism(face.Shape(), gp_Vec(0.0, 0.0, thickness))
    
        return wedge.Shape()
    
    
    def round_tooth(wedge):
        round_x = 2.6
        round_z = 0.06 * pitch
        round_radius = pitch
    
        # Determine where the circle used for rounding has to start and stop
        p2d_1 = gp_Pnt2d(top_radius - round_x, 0)
        p2d_2 = gp_Pnt2d(top_radius, round_z)
    
        # Construct the rounding circle
        round_circle = GccAna_Circ2d2TanRad(p2d_1, p2d_2, round_radius, 0.01)
        if (round_circle.NbSolutions() != 2):
            sys.exit(-2)
    
        round_circle_2d_1 = round_circle.ThisSolution(1)
        round_circle_2d_2 = round_circle.ThisSolution(2)
    
        if (round_circle_2d_1.Position().Location().Coord()[1] >= 0):
            round_circle_2d = round_circle_2d_1
        else:
            round_circle_2d = round_circle_2d_2
    
        # Remove the arc used for rounding
        trimmed_circle = GCE2d_MakeArcOfCircle(round_circle_2d, p2d_1, p2d_2).Value()
    
        # Calculate extra points used to construct lines
        p1 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y())
        p2 = gp_Pnt(p2d_2.X(), 0, p2d_2.Y())
        p3 = gp_Pnt(p2d_2.X() + 1, 0, p2d_2.Y())
        p4 = gp_Pnt(p2d_2.X() + 1, 0, p2d_1.Y() - 1)
        p5 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y() - 1)
    
        # Convert the arc and four extra lines into 3D edges
        plane = gp_Pln(gp_Ax3(gp_Origin(), gp_DY().Reversed(), gp_DX()))
        arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_circle, plane)).Edge()
        lin1 = BRepBuilderAPI_MakeEdge(p2, p3).Edge()
        lin2 = BRepBuilderAPI_MakeEdge(p3, p4).Edge()
        lin3 = BRepBuilderAPI_MakeEdge(p4, p5).Edge()
        lin4 = BRepBuilderAPI_MakeEdge(p5, p1).Edge()
    
        # Make a wire composed of the edges
        round_wire = BRepBuilderAPI_MakeWire(arc1)
        round_wire.Add(lin1)
        round_wire.Add(lin2)
        round_wire.Add(lin3)
        round_wire.Add(lin4)
    
        # Turn the wire into a face
        round_face = BRepBuilderAPI_MakeFace(round_wire.Wire()).Shape()
    
        # Revolve the face around the Z axis over the tooth angle
        rounding_cut_1 = BRepPrimAPI_MakeRevol(round_face, gp_OZ(), tooth_angle).Shape()
    
        # Construct a mirrored copy of the first cutting shape
        mirror = gp_Trsf()
        mirror.SetMirror(gp_XOY())
        mirrored_cut_1 = BRepBuilderAPI_Transform(rounding_cut_1, mirror, True).Shape()
    
        # and translate it so that it ends up on the other side of the wedge
        translate = gp_Trsf()
        translate.SetTranslation(gp_Vec(0, 0, thickness))
        rounding_cut_2 = BRepBuilderAPI_Transform(mirrored_cut_1, translate, False).Shape()
    
        # Cut the wedge using the first and second cutting shape
        cut_1 = BRepAlgoAPI_Cut(wedge, rounding_cut_1).Shape()
        cut_2 = BRepAlgoAPI_Cut(cut_1, rounding_cut_2).Shape()
    
        return cut_2
    
    
    def clone_tooth(base_shape):
        clone = gp_Trsf()
        grouped_shape = base_shape
    
        # Find a divisor, between 1 and 8, for the number_of teeth
        multiplier = 1
        max_multiplier = 1
        for i in range(0, 8):
            if num_teeth % multiplier == 0:
                max_multiplier = i + 1
    
        multiplier = max_multiplier
        for i in range(1, multiplier):
            clone.SetRotation(gp_OZ(), -i * tooth_angle)
            rotated_shape = BRepBuilderAPI_Transform(base_shape, clone, True).Shape()
            grouped_shape = BRepAlgoAPI_Fuse(grouped_shape, rotated_shape).Shape()
    
        # Rotate the basic tooth and fuse together
        aggregated_shape = grouped_shape
        for i in range(1, int(num_teeth / multiplier)):
            clone.SetRotation(gp_OZ(), - i * multiplier * tooth_angle)
            rotated_shape = BRepBuilderAPI_Transform(grouped_shape, clone, True).Shape()
            aggregated_shape = BRepAlgoAPI_Fuse(aggregated_shape, rotated_shape).Shape()
    
        cylinder = BRepPrimAPI_MakeCylinder(gp_XOY(),
                                            top_radius - roller_diameter,
                                            thickness)
        aggregated_shape = BRepAlgoAPI_Fuse(aggregated_shape,
                                            cylinder.Shape()).Shape()
    
        return aggregated_shape
    
    
    def center_hole(base):
        cylinder = BRepPrimAPI_MakeCylinder(center_radius, thickness).Shape()
        cut = BRepAlgoAPI_Cut(base, cylinder)
        return cut.Shape()
    
    
    def mounting_holes(base):
        result = base
        for i in range(0, mounting_hole_count):
            center = gp_Pnt(cos(i * M_PI / 3) * mounting_radius,
                            sin(i * M_PI / 3) * mounting_radius, 0.0)
            center_axis = gp_Ax2(center, gp_DZ())
    
            cylinder = BRepPrimAPI_MakeCylinder(center_axis, hole_radius,
                                                thickness).Shape()
            result = BRepAlgoAPI_Cut(result, cylinder).Shape()
    
            cone = BRepPrimAPI_MakeCone(center_axis,
                                        hole_radius + thickness / 2.,
                                        hole_radius, thickness / 2.)
            result = BRepAlgoAPI_Cut(result, cone.Shape()).Shape()
    
        return result
    
    
    def cut_out(base):
        outer = gp_Circ2d(gp_OX2d(), top_radius - 1.75 * roller_diameter)
        inner = gp_Circ2d(gp_OX2d(), center_radius + 0.75 * roller_diameter)
    
        geom_outer = GCE2d_MakeCircle(outer).Value()
        geom_inner = GCE2d_MakeCircle(inner).Value()
        geom_inner.Reverse()
    
        base_angle = (2. * M_PI) / mounting_hole_count
        hole_angle = atan(hole_radius / mounting_radius)
        correction_angle = 3 * hole_angle
    
        left = gp_Lin2d(gp_Origin2d(), gp_DX2d())
        right = gp_Lin2d(gp_Origin2d(), gp_DX2d())
        left.Rotate(gp_Origin2d(), correction_angle)
        right.Rotate(gp_Origin2d(), base_angle - correction_angle)
    
        geom_left = GCE2d_MakeLine(left).Value()
        geom_right = GCE2d_MakeLine(right).Value()
    
        inter_1 = Geom2dAPI_InterCurveCurve(geom_outer, geom_left)
        inter_2 = Geom2dAPI_InterCurveCurve(geom_outer, geom_right)
        inter_3 = Geom2dAPI_InterCurveCurve(geom_inner, geom_right)
        inter_4 = Geom2dAPI_InterCurveCurve(geom_inner, geom_left)
    
        if inter_1.Point(1).X() > 0:
            p1 = inter_1.Point(1)
        else:
            p1 = inter_1.Point(2)
    
        if inter_2.Point(1).X() > 0:
            p2 = inter_2.Point(1)
        else:
            p2 = inter_2.Point(2)
    
        if inter_3.Point(1).X() > 0:
            p3 = inter_3.Point(1)
        else:
            p3 = inter_3.Point(2)
    
        if inter_4.Point(1).X() > 0:
            p4 = inter_4.Point(1)
        else:
            p4 = inter_4.Point(2)
    
        trimmed_outer = GCE2d_MakeArcOfCircle(outer, p1, p2).Value()
        trimmed_inner = GCE2d_MakeArcOfCircle(inner, p4, p3).Value()
    
        plane = gp_Pln(gp_Origin(), gp_DZ())
    
        arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_outer, plane)).Edge()
    
        lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p2.X(), p2.Y(), 0),
                                       gp_Pnt(p3.X(), p3.Y(), 0)).Edge()
    
        arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_inner, plane)).Edge()
    
        lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
                                       gp_Pnt(p1.X(), p1.Y(), 0)).Edge()
    
        cutout_wire = BRepBuilderAPI_MakeWire(arc1)
        cutout_wire.Add(lin1)
        cutout_wire.Add(arc2)
        cutout_wire.Add(lin2)
    
        # Turn the wire into a face
        cutout_face = BRepBuilderAPI_MakeFace(cutout_wire.Wire())
        filleted_face = BRepFilletAPI_MakeFillet2d(cutout_face.Face())
    
        explorer = BRepTools_WireExplorer(cutout_wire.Wire())
        while explorer.More():
            vertex = explorer.CurrentVertex()
            filleted_face.AddFillet(vertex, roller_radius)
            explorer.Next()
    
        cutout = BRepPrimAPI_MakePrism(filleted_face.Shape(),
                                       gp_Vec(0.0, 0.0, thickness)).Shape()
    
        result = base
        rotate = gp_Trsf()
        for i in range(0, mounting_hole_count):
            rotate.SetRotation(gp_OZ(), i * 2. * M_PI / mounting_hole_count)
            rotated_cutout = BRepBuilderAPI_Transform(cutout, rotate, True)
    
            result = BRepAlgoAPI_Cut(result,
                                     rotated_cutout.Shape()).Shape()
    
        return result
    
    
    def build_sprocket():
        # create the sprocket model
        wedge = build_tooth()
        rounded_wedge = round_tooth(wedge)
        basic_disk = clone_tooth(rounded_wedge)
        cut_disc = center_hole(basic_disk)
        mountable_disc = mounting_holes(cut_disc)
        sprocket = cut_out(mountable_disc)
        return sprocket
    
    
    sprocket_model = build_sprocket()
    # display the sprocket

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3dlaXhpbl80Mjc1NTM4NA_size_16_color_FFFFFF_t_70]: /images/20211129/ceb253d9efe5458bb027e672ba5d3992.png