elk基本安装配置

你的名字 2022-01-17 03:45 272阅读 0赞

## elk安装整理 ##

kibana安装配置

--------------------

rpm 安装

vim vim /etc/kibana/kibana.yml  
修改访问端口地址  
server.port: 5601

server.host: "ip"

修改elasticsearch访问地址  
elasticsearch.url: "[http://ip:9200][http_ip_9200]"

elasticsearch安装配置

--------------------

rpm 安装 jdk 1.8以上

vim /etc/elasticsearch/elasticsearch.yml  
修改集群名字节点名字一样  
cluster.name: my-elk  
节点一  
node.name: elk-node-1  
存放数据路径  
mkdir -p /data/  
chown -R elasticsearch:elasticsearch /data  
path.data: /data/elasticsearch  
path.logs: /var/log/elasticsearch

# ----------------------------------- Memory -----------------------------------## Lock the memory on startup:#

bootstrap.memory\_lock: false  
bootstrap.system\_call\_filter: false

network.host: 0.0.0.0  
http.port: 9200  
discovery.zen.ping.unicast.hosts: \["ip1", "ip2"\]

head插件安装

--------------------

service elasticsearch restart

安装出错问题排查

--------------------

logstash安装

--------------------

rpm安装  
mkdir -p /data/logstash

## vim /etc/logstash/logstash.yml   path.data: /data/logstash   http.host: "10.144.23.33"   http.port: 9600-9700   path.logs: /var/log/logstash   建立过滤日志文件 ##

标准输入、输出

## /usr/share/logstash/bin/logstash -e 'input\{stdin\{\}\} output\{stdout\{\}\}' ##

## /usr/share/logstash/bin/logstash -e 'input\{stdin\{\}\}output\{stdout\{codec=>"rubydebug"\}\}' ##

输出到elasticsearch

## /usr/share/logstash/bin/logstash -e 'input\{stdin\{\}\} output\{ elasticsearch \{hosts => \["ip:9200"\]\}\}' ##

## /usr/share/logstash/bin/logstash -e 'input\{\}output\{ elasticsearch \{hosts\["ip:9200"\]\} stdout\{codec =>"rubydebug"\}\}' ##

默认路径  
vim /etc/logstash/conf.d/simple.conf --必须以.conf后缀  
input\{  
stdin\{\}  
\}  
output\{  
elasticsearh  
hosts\[""\]  
\}

收集系统日志
    
    input{
        file{
              path => "/var/log/messages"
                type => "system"
                start_postition => "beginning"
            }
    }
    output{
        elasticsearch{
                   hosts => ["ip:9200"]
                     index => "system-%{+YYYY.MM.dd}"
                }
    
    }

## 收集java日志 ##

input{
            file{
            path =>""
                type =>""
                start_postition =>""
                }
        }
        input{
            file{
                path =>"/var/log/elasticsearch/my-elk.log"
                type =>"es-error"                                     / /为自定义类型
                start_postition =>"beginning"
                }
        }
        output{
             if[type]=="system"{
                     elasticsearch{
                             hosts =>["IP:9200"]
                                 index =>"system-%{+YYYY.MM.dd}"
                         }
            if[type]=="es-error"{
                         elasticsearch{
                                hosts =>["ip:9200"]
                                index =>"es-error-%{+YYYY.MM.dd}"
                             }
    
                    }
                 }
    
        }

## 多行收集 ##

input{
           stdin{
                codec => multiline {     //多行模式。碰到指定模式之前，日志为无效。遇见模式时，才将模式之前的信息，收集成日志
    
                pattern => "^\["               // 模式
                negate => true               //无效
                what => "previous"         //之前
    
                        }
         }
    
        }
    output{
          stdout{
                codec =>" rubydebug"
                }
    
        }

启动logstash  
/usr/share/logstash/bin/logstash -f /etc/logstash/conf.d/simple.conf &

由于logstash 比较耗费资源采用轻量级filebeats

安装filebeats

--------------------

vim /etc/filebeat/filebeat.yml

\#=========================== Filebeat inputs =============================  
filebeat.inputs:

# Each - is an input. Most options can be set at the input level, so
    # you can use different inputs for various configurations.
    # Below are the input specific configurations.

\- type: log

# Change to true to enable this input configuration.

enabled: true

# Paths that should be crawled and fetched. Glob based paths.

paths:

*  /home/159tomcat/logs/\*.txt  
    \#============================= Filebeat modules ===============================

filebeat.config.modules:

# Glob pattern for configuration loading #

path: $\{path.config\}/modules.d/\*.yml

# Set to true to enable config reloading

reload.enabled: true  
\#----------------------------- Logstash output --------------------------------  
output.logstash:

# The Logstash hosts #