RecyclerView缓存机制（回收去哪？）

电玩女神 2022-01-20 10:53 261阅读 0赞

这是`RecyclerView`缓存机制系列文章的第三篇，系列文章的目录如下：

1.  [RecyclerView缓存机制（咋复用？）][RecyclerView]
2.  [RecyclerView缓存机制（回收些啥？）][RecyclerView 1]
3.  [RecyclerView缓存机制（回收去哪？）][RecyclerView 2]
4.  [RecyclerView缓存机制（scrap view）][RecyclerView_scrap view]

如果想直接看结论可以移步到[第四篇][RecyclerView_scrap view]末尾（你会后悔的，过程更加精彩）。

## 回收入口 ##

上一篇以列表滑动事件为起点沿着调用链一直往下寻找，验证了“滑出屏幕的表项”会被回收。那它们被回收去哪里了？沿着上一篇的调用链继续往下探究：

public class LinearLayoutManager extends RecyclerView.LayoutManager implements ItemTouchHelper.ViewDropHandler, RecyclerView.SmoothScroller.ScrollVectorProvider {
        ...
        /**
         * Recycles views that went out of bounds after scrolling towards the end of the layout.
         * 当向列表尾部滚动时回收滚出屏幕的表项
         * <p>
         * Checks both layout position and visible position to guarantee that the view is not visible.
         *
         * @param recycler Recycler instance of {@link android.support.v7.widget.RecyclerView}
         * @param dt       This can be used to add additional padding to the visible area. This is used
         *                 to detect children that will go out of bounds after scrolling, without
         *                 actually moving them.（该参数被用于检测滚出屏幕的表项）
         */
        private void recycleViewsFromStart(RecyclerView.Recycler recycler, int dt) {
            ...
            // ignore padding, ViewGroup may not clip children.
            final int limit = dt;
            final int childCount = getChildCount();
            if (mShouldReverseLayout) {
                for (int i = childCount - 1; i >= 0; i--) {
                    View child = getChildAt(i);
                    if (mOrientationHelper.getDecoratedEnd(child) > limit
                            || mOrientationHelper.getTransformedEndWithDecoration(child) > limit) {
                        // stop here
                        recycleChildren(recycler, childCount - 1, i);
                        return;
                    }
                }
            } else {
                //遍历LinearLayoutManager的孩子找出其中应该被回收的
                for (int i = 0; i < childCount; i++) {
                    View child = getChildAt(i);
                    //直到表项底部纵坐标大于某个值后，回收该表项以上的所有表项
                    if (mOrientationHelper.getDecoratedEnd(child) > limit
                            || mOrientationHelper.getTransformedEndWithDecoration(child) > limit) {
                        // stop here
                        //回收索引为0到i-1的表项
                        recycleChildren(recycler, 0, i);
                        return;
                    }
                }
            }
        }
        ...
    }
    复制代码

`recycleViewsFromStart()`通过遍历找到滑出屏幕的表项，然后调用了`recycleChildren()`回收他们：

public class LinearLayoutManager extends RecyclerView.LayoutManager implements ItemTouchHelper.ViewDropHandler, RecyclerView.SmoothScroller.ScrollVectorProvider {
        /**
         * Recycles children between given indices.
         * 回收孩子
         *
         * @param startIndex inclusive
         * @param endIndex   exclusive
         */
        private void recycleChildren(RecyclerView.Recycler recycler, int startIndex, int endIndex) {
            if (startIndex == endIndex) {
                return;
            }
            if (DEBUG) {
                Log.d(TAG, "Recycling " + Math.abs(startIndex - endIndex) + " items");
            }
            if (endIndex > startIndex) {
                for (int i = endIndex - 1; i >= startIndex; i--) {
                    removeAndRecycleViewAt(i, recycler);
                }
            } else {
                for (int i = startIndex; i > endIndex; i--) {
                    removeAndRecycleViewAt(i, recycler);
                }
            }
        }
    }
    复制代码

最终调用了父类`LayoutManager.removeAndRecycleViewAt()`：

public abstract static class LayoutManager {
            /**
             * Remove a child view and recycle it using the given Recycler.
             *
             * @param index Index of child to remove and recycle
             * @param recycler Recycler to use to recycle child
             */
            public void removeAndRecycleViewAt(int index, Recycler recycler) {
                final View view = getChildAt(index);
                removeViewAt(index);
                recycler.recycleView(view);
            }
    }
    复制代码

先从`LayoutManager`中删除表项，然后调用`Recycler.recycleView()`回收表项：

public final class Recycler {
            /**
             * Recycle a detached view. The specified view will be added to a pool of views
             * for later rebinding and reuse.
             *
             * <p>A view must be fully detached (removed from parent) before it may be recycled. If the
             * View is scrapped, it will be removed from scrap list.</p>
             *
             * @param view Removed view for recycling
             * @see LayoutManager#removeAndRecycleView(View, Recycler)
             */
            public void recycleView(View view) {
                // This public recycle method tries to make view recycle-able since layout manager
                // intended to recycle this view (e.g. even if it is in scrap or change cache)
                ViewHolder holder = getChildViewHolderInt(view);
                if (holder.isTmpDetached()) {
                    removeDetachedView(view, false);
                }
                if (holder.isScrap()) {
                    holder.unScrap();
                } else if (holder.wasReturnedFromScrap()) {
                    holder.clearReturnedFromScrapFlag();
                }
                recycleViewHolderInternal(holder);
            }
    }
    复制代码

通过表项视图拿到了对应`ViewHolder`，然后把其传入`Recycler.recycleViewHolderInternal()`，现在就可以更准地回答上一篇的那个问题“回收些啥？”：**回收的是滑出屏幕表项对应的`ViewHolder`** 。

public final class Recycler {
            ...
            int mViewCacheMax = DEFAULT_CACHE_SIZE;
            static final int DEFAULT_CACHE_SIZE = 2;
            final ArrayList<ViewHolder> mCachedViews = new ArrayList<ViewHolder>();
            ...
            /**
             * internal implementation checks if view is scrapped or attached and throws an exception
             * if so.
             * Public version un-scraps before calling recycle.
             */
            void recycleViewHolderInternal(ViewHolder holder) {
                ...
                if (forceRecycle || holder.isRecyclable()) {
                    //先存在mCachedViews里面
                    //这里的判断条件决定了复用mViewCacheMax中的ViewHolder时不需要重新绑定数据
                    if (mViewCacheMax > 0
                            && !holder.hasAnyOfTheFlags(ViewHolder.FLAG_INVALID
                            | ViewHolder.FLAG_REMOVED
                            | ViewHolder.FLAG_UPDATE
                            | ViewHolder.FLAG_ADAPTER_POSITION_UNKNOWN)) {
                        // Retire oldest cached view
                        //如果mCachedViews大小超限了，则删掉最老的被缓存的ViewHolder
                        int cachedViewSize = mCachedViews.size();
                        if (cachedViewSize >= mViewCacheMax && cachedViewSize > 0) {
                            recycleCachedViewAt(0);
                            cachedViewSize--;
                        }
    
                        int targetCacheIndex = cachedViewSize;
                        if (ALLOW_THREAD_GAP_WORK
                                && cachedViewSize > 0
                                && !mPrefetchRegistry.lastPrefetchIncludedPosition(holder.mPosition)) {
                            // when adding the view, skip past most recently prefetched views
                            int cacheIndex = cachedViewSize - 1;
                            while (cacheIndex >= 0) {
                                int cachedPos = mCachedViews.get(cacheIndex).mPosition;
                                if (!mPrefetchRegistry.lastPrefetchIncludedPosition(cachedPos)) {
                                    break;
                                }
                                cacheIndex--;
                            }
                            targetCacheIndex = cacheIndex + 1;
                        }
                        //ViewHolder加到缓存中
                        mCachedViews.add(targetCacheIndex, holder);
                        cached = true;
                    }
                    //若ViewHolder没有入缓存则存入回收池
                    if (!cached) {
                        addViewHolderToRecycledViewPool(holder, true);
                        recycled = true;
                    }
                } else {
                    ...
                }
                ...
    }
    复制代码

*  通过`cached`这个布尔值，实现互斥，即`ViewHolder`要么存入`mCachedViews`，要么存入`pool`
 *  `mCachedViews`有大小限制，默认只能存2个`ViewHolder`，当第三个`ViewHolder`存入时会把第一个移除掉，代码如下：

public final class Recycler {
            ...
            void recycleCachedViewAt(int cachedViewIndex) {
                if (DEBUG) {
                    Log.d(TAG, "Recycling cached view at index " + cachedViewIndex);
                }
                ViewHolder viewHolder = mCachedViews.get(cachedViewIndex);
                if (DEBUG) {
                    Log.d(TAG, "CachedViewHolder to be recycled: " + viewHolder);
                }
                //将ViewHolder加入到回收池
                addViewHolderToRecycledViewPool(viewHolder, true);
                //将ViewHolder从cache中移除
                mCachedViews.remove(cachedViewIndex);
            }
            ...
    }
    复制代码

从`mCachedViews`移除掉的`ViewHolder`会加入到回收池中。 **`mCachedViews`有点像“回收池预备队列”，即总是先回收到`mCachedViews`，当它放不下的时候，按照先进先出原则将最先进入的`ViewHolder`存入回收池** ：

public final class Recycler {
            /**
             * Prepares the ViewHolder to be removed/recycled, and inserts it into the RecycledViewPool.
             * 将viewHolder存入回收池
             *
             * Pass false to dispatchRecycled for views that have not been bound.
             *
             * @param holder Holder to be added to the pool.
             * @param dispatchRecycled True to dispatch View recycled callbacks.
             */
            void addViewHolderToRecycledViewPool(ViewHolder holder, boolean dispatchRecycled) {
                clearNestedRecyclerViewIfNotNested(holder);
                if (holder.hasAnyOfTheFlags(ViewHolder.FLAG_SET_A11Y_ITEM_DELEGATE)) {
                    holder.setFlags(0, ViewHolder.FLAG_SET_A11Y_ITEM_DELEGATE);
                    ViewCompat.setAccessibilityDelegate(holder.itemView, null);
                }
                if (dispatchRecycled) {
                    dispatchViewRecycled(holder);
                }
                holder.mOwnerRecyclerView = null;
                getRecycledViewPool().putRecycledView(holder);
            }
    }
    
    public static class RecycledViewPool {
            static class ScrapData {
                ArrayList<ViewHolder> mScrapHeap = new ArrayList<>();
                //每种类型的ViewHolder最多存5个
                int mMaxScrap = DEFAULT_MAX_SCRAP;
                long mCreateRunningAverageNs = 0;
                long mBindRunningAverageNs = 0;
            }
            //以viewType为键，ScrapData为值，作为回收池中ViewHolder的容器
            SparseArray<ScrapData> mScrap = new SparseArray<>();
            //ViewHolder入池 按viewType分类入池，相同的ViewType存放在List中
            public void putRecycledView(ViewHolder scrap) {
                final int viewType = scrap.getItemViewType();
                final ArrayList<ViewHolder> scrapHeap = getScrapDataForType(viewType).mScrapHeap;
                //如果超限了，则放弃入池
                if (mScrap.get(viewType).mMaxScrap <= scrapHeap.size()) {
                    return;
                }
                if (DEBUG && scrapHeap.contains(scrap)) {
                    throw new IllegalArgumentException("this scrap item already exists");
                }
                //入回收池之前重置ViewHolder
                scrap.resetInternal();
                scrapHeap.add(scrap);
            }
    }
    复制代码

`ViewHolder`会按`viewType`分类存入回收池，最终存储在`ScrapData`的`ArrayList`中，回收池数据结构分析详见[RecyclerView缓存机制（咋复用？）][RecyclerView]。

## 缓存优先级 ##

还记得[RecyclerView缓存机制（咋复用？）][RecyclerView]中得出的结论吗？这里再引用一下：

>  *  虽然为了获取`ViewHolder`做了5次尝试（共从6个地方获取），先排除3种特殊情况，即从`mChangedScrap`获取、通过id获取、从自定义缓存获取，正常流程中只剩下3种获取方式，优先级从高到低依次是：
> 
> 1.  从`mAttachedScrap`获取
> 2.  从`mCachedViews`获取
> 3.  从`mRecyclerPool`获取
> 
>  *  ***这样的缓存优先级是不是意味着，对应的复用性能也是从高到低？（复用性能越好意味着所做的昂贵操作越少）***
> 
> 1.  最坏情况：重新创建`ViewHodler`并重新绑定数据
> 2.  次好情况：复用`ViewHolder`但重新绑定数据
> 3.  最好情况：复用`ViewHolder`且不重新绑定数据

当时分析了`mAttachedScrap`和`mRecyclerPool`的复用性能，即 **从`mRecyclerPool`中复用的`ViewHolder`需要重新绑定数据，从`mAttachedScrap`中复用的`ViewHolder`不需要重新创建也不需要重新绑定数据**

把存入`mCachedViews`的代码和复用时绑定数据的代码结合起来看一下：

void recycleViewHolderInternal(ViewHolder holder) {
        ...
        //满足这个条件才能存入mCachedViews
        if (mViewCacheMax > 0
            && !holder.hasAnyOfTheFlags(ViewHolder.FLAG_INVALID
            | ViewHolder.FLAG_REMOVED
            | ViewHolder.FLAG_UPDATE
            | ViewHolder.FLAG_ADAPTER_POSITION_UNKNOWN)) {
        }
        ...
    }
    
    ViewHolder tryGetViewHolderForPositionByDeadline(int position,boolean dryRun, long deadlineNs) {
        ...
        //满足这个条件就需要重新绑定数据
        if (!holder.isBound() || holder.needsUpdate() || holder.isInvalid()){
        }
        ...
    复制代码

重新绑定数据的三个条件中，`holder.needsUpdate()`和`holder.isInvalid()`都是`false`时才能存入`mCachedViews`，而`!holder.isBound()`对于`mCachedViews`中的`ViewHolder`来说必然为`false`，因为只有当调用`ViewHolder.resetInternal()`重置`ViewHolder`后，才会将其设置为未绑定状态，而只有存入回收池时才会重置`ViewHolder`。所以 **从`mCachedViews`中复用的`ViewHolder`不需要重新绑定数据**

## 总结 ##

*  滑出屏幕表项对应的`ViewHolder`会被回收到`mCachedViews`\+`mRecyclerPool`结构中，`mCachedViews`是`ArrayList`，默认存储最多2个`ViewHolder`，当它放不下的时候，按照先进先出原则将最先进入的`ViewHolder`存入回收池的方式来腾出空间。`mRecyclerPool`是`SparseArray`，它会按`viewType`分类存储`ViewHolder`，默认每种类型最多存5个。
 *  从`mRecyclerPool`中复用的`ViewHolder`需要重新绑定数据
 *  从`mCachedViews`中复用的`ViewHolder`不需要重新绑定数据

[RecyclerView]: https://juejin.im/post/5c696ba9e51d457f136d24ff
[RecyclerView 1]: https://juejin.im/post/5c696c69e51d45403f2aa366
[RecyclerView 2]: https://juejin.im/post/5c696cbbe51d457ffa370912
[RecyclerView_scrap view]: https://juejin.im/post/5c6cf69fe51d4501377b988c