RabbitMQ负载均衡（3）——Keepalived+HAProxy实现高可用的负载均衡

た入场券 2022-01-30 09:59 252阅读 0赞

试想下如果前面配置的HAProxy主机192.168.0.9突然宕机或者网卡失效，那么虽然RabbitMQ集群没有任何故障，但是对于外界的客户端来说所有的连接都会被断开，结果将是灾难性的。确保负载均衡服务的可靠性同样显得十分的重要。这里就引入Keepalived工具，它能够通过自身健康检查、资源接管功能做高可用（双机热备），实现故障转移。

Keepalived采用VRRP（Virtual Router Redundancy Protocol，虚拟路由冗余协议），以软件的形式实现服务器热备功能。通常情况下是将两台Linux服务器组成一个热备组（Master和Backup），同一时间热备组内只有一台主服务器Master提供服务，同时Master会虚拟出一个公用的虚拟IP地址，简称VIP。这个VIP只存在在Master上并对外提供服务。如果Keepalived检测到Master宕机或者服务故障，备份服务器Backup会自动接管VIP称为Master，Keepalived并将原Master从热备组中移除。当原Master恢复后，会自动加入到热备组，默认再抢占称为Master，起到故障转移的功能。

Keepalived工作在OSI模型中的第3层、第4层和第7层。  
工作在第3层是指Keepalived会定期向热备组中的服务器发送一个ICMP数据包来判断某台服务器是否故障，如果故障则将这台服务器从热备组移除。  
工作在第4层是指Keepalived以TCP端口的状态判断服务器是否故障，比如检测RabbitMQ的5672端口，如果故障则将这台服务器从热备组中移除。  
工作在第7层是指Keepalived根据用户设定的策略（通常是一个自定义的检测脚本）判断服务器上的程序是否正常运行，如果故障将这台服务器从热备组移除。

## Keepalived的安装 ##

首先需要去Keepalived的官网下载Keepalived的安装文件，目前最新的版本为：keepalived-1.3.5.tar.gz，下载地址为[http://www.keepalived.org/download.html][http_www.keepalived.org_download.html]。  
将keepalived-1.3.5.tar.gz解压并安装，详细步骤如下：

[root@node1 ~]# tar zxvf keepalived-1.3.5.tar.gz 
    [root@node1 ~]# cd keepalived-1.3.5
    [root@node1 keepalived-1.3.5]# ./configure --prefix=/opt/keepalived --with-init=SYSV 
    #注：(upstart|systemd|SYSV|SUSE|openrc) #根据你的系统选择对应的启动方式
    [root@node1 keepalived-1.3.5]# make
    [root@node1 keepalived-1.3.5]# make install

之后将安装过后的Keepalived加入系统服务中，详细步骤如下（注意千万不要输错命令）：

#复制启动脚本到/etc/init.d/下
    [root@node1 ~]# cp /opt/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/ 
    [root@node1 ~]# cp /opt/keepalived/etc/sysconfig/keepalived /etc/sysconfig
    [root@node1 ~]# cp /opt/keepalived/sbin/keepalived /usr/sbin/
    [root@node1 ~]# chmod +x /etc/init.d/keepalived 
    [root@node1 ~]# chkconfig --add keepalived
    [root@node1 ~]# chkconfig keepalived on
    #Keepalived默认会读取/etc/keepalived/keepalived.conf配置文件
    [root@node1 ~]# mkdir /etc/keepalived
    [root@node1 ~]# cp /opt/keepalived/etc/keepalived/keepalived.conf /etc/keepalived/

执行完之后就可以使用如下：

service keepalived restart
    service keepalived start
    service keepalived stop
    service keepalived status

这4个命令来重启、启动、关闭和查看keepalived状态。

## 配置 ##

在安装的时候我们已经创建了/etc/keepalived目录，并将keepalived.conf配置文件拷贝到此目录下，如此Keepalived便可以读取这个默认的配置文件了。如果要将Keepalived与前面的HAProxy服务结合起来需要更改/etc/keepalived/keepalived.conf这个配置文件，在此之前先来看看本次配置需要完成的详情及目标。  
![这里写图片描述][SouthEast]

如图所示，两台Keepalived服务器之间通过VRRP进行交互，对外部虚拟出一个VIP为192.168.0.10。Keepalived与HAProxy部署在同一台机器上，两个Keepalived服务实例匹配两个HAProxy服务实例，这样通过Keeaplived实现HAProxy的双机热备。所以在上一小节的192.168.0.9的基础之上，还要再部署一台HAProxy服务，IP地址为192.168.0.8。整条调用链路为：客户端通过VIP建立通信链路；通信链路通过Keeaplived的Master节点路由到对应的HAProxy之上；HAProxy通过负载均衡算法将负载分发到集群中的各个节点之上。正常情况下客户端的连接通过图中左侧部分进行负载分发。当Keepalived的Master节点挂掉或者HAProxy挂掉无法恢复，那么Backup提升为Master，客户端的连接通过图中右侧部分进行负载分发。如果你追求要更高的可靠性，可以加入多个Backup角色的Keepalived节点来实现一主多从的多机热备。当然这样会提升硬件资源的成本，该如何抉择需要更细致的考恒，一般情况下双机热备的配备已足够满足应用需求。

接下来我们要修改/etc/keepalived/keepalived.conf文件，在Keepalived的Master上配置详情如下：

#Keepalived配置文件
    global_defs {
            router_id NodeA                 #路由ID, 主备的ID不能相同
    }
    
    #自定义监控脚本
    vrrp_script chk_haproxy {
            script "/etc/keepalived/check_haproxy.sh"
            interval 5
            weight 2
    }
    
    vrrp_instance VI_1 {
            state MASTER #Keepalived的角色。Master表示主服务器，从服务器设置为BACKUP
            interface eth0          #指定监测网卡
            virtual_router_id 1
            priority 100            #优先级，BACKUP机器上的优先级要小于这个值
            advert_int 1            #设置主备之间的检查时间，单位为s
            authentication {        #定义验证类型和密码
                    auth_type PASS
                    auth_pass root123
            }
            track_script {
                    chk_haproxy
            }
            virtual_ipaddress {     #VIP地址，可以设置多个：
                    192.168.0.10
            }
    }

Backup中的配置大致和Master中的相同，不过需要修改global\_defs\{\}的router\_id，比如置为NodeB；其次要修改vrrp\_instance VI\_1\{\}中的state为BACKUP；最后要将priority设置为小于100的值。注意Master和Backup中的virtual\_router\_id要保持一致。下面简要的展示下Backup的配置：

global_defs {
            router_id NodeB
    }
    vrrp_script chk_haproxy {
     ...
    }
    vrrp_instance VI_1 {
            state BACKUP
     ...
            priority 50
     ...
    }

为了防止HAProxy服务挂了，但是Keepalived却还在正常工作而没有切换到Backup上，所以这里需要编写一个脚本来检测HAProxy服务的状态。当HAProxy服务挂掉之后该脚本会自动重启HAProxy的服务，如果不成功则关闭Keepalived服务，如此便可以切换到Backup继续工作。这个脚本就对应了上面配置中vrrp\_script chk\_haproxy\{\}的script对应的值，/etc/keepalived/check\_haproxy.sh的内容如代码清单所示。

#!/bin/bash
    if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ];then
            haproxy -f /opt/haproxy-1.7.8/haproxy.cfg
    fi
    sleep 2
    if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ];then
            service keepalived stop
    fi

如此配置好之后，使用service keepalived start命令启动192.168.0.8和192.168.0.9中的Keepalived服务即可。之后客户端的应用可以通过192.168.0.10这个IP地址来接通RabbitMQ服务。

## 查看Keepalived的运行情况 ##

可以通过tail -f /var/log/messages -n 200命令查看相应的Keepalived日志输出。Master启动日志如下：

Oct 4 23:01:51 node1 Keepalived[30553]: Starting Keepalived v1.3.5 (03/19,2017), git commit v1.3.5-6-g6fa32f2
    Oct 4 23:01:51 node1 Keepalived[30553]: Unable to resolve default script username 'keepalived_script' - ignoring
    Oct 4 23:01:51 node1 Keepalived[30553]: Opening file '/etc/keepalived/keepalived.conf'.
    Oct 4 23:01:51 node1 Keepalived[30554]: Starting Healthcheck child process, pid=30555
    Oct 4 23:01:51 node1 Keepalived[30554]: Starting VRRP child process, pid=30556
    Oct 4 23:01:51 node1 Keepalived_healthcheckers[30555]: Opening file '/etc/keepalived/keepalived.conf'.
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: Registering Kernel netlink reflector
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: Registering Kernel netlink command channel
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: Registering gratuitous ARP shared channel
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: Opening file '/etc/keepalived/keepalived.conf'.
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: VRRP_Instance(VI_1) removing protocol VIPs.
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: SECURITY VIOLATION - scripts are being executed but script_security not enabled.
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: Using LinkWatch kernel netlink reflector...
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: VRRP sockpool: [ifindex(2), proto(112), unicast(0), fd(10,11)]
    Oct 4 23:01:51 node1 Keepalived_vrrp[30556]: VRRP_Instance(VI_1) Transition to MASTER STATE
    Oct 4 23:01:52 node1 Keepalived_vrrp[30556]: VRRP_Instance(VI_1) Entering MASTER STATE
    Oct 4 23:01:52 node1 Keepalived_vrrp[30556]: VRRP_Instance(VI_1) setting protocol VIPs.

Master启动之后可以通过ip add show命令查看添加的VIP（加粗部分，Backup节点是没有VIP的）：

[root@node1 ~]# ip add show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:5e:7a:f7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.0.8/18 brd 10.198.255.255 scope global eth0
        inet 192.168.0.10/32 scope global eth0
        inet6 fe80::f816:3eff:fe5e:7af7/64 scope link 
           valid_lft forever preferred_lft forever

在Master节点执行 service keepalived stop模拟异常关闭的情况，观察Master的日志：

Oct 4 22:58:32 node1 Keepalived[27609]: Stopping
    Oct 4 22:58:32 node1 Keepalived_vrrp[27611]: VRRP_Instance(VI_1) sent 0 priority
    Oct 4 22:58:32 node1 Keepalived_vrrp[27611]: VRRP_Instance(VI_1) removing protocol VIPs.
    Oct 4 22:58:32 node1 Keepalived_healthcheckers[27610]: Stopped
    Oct 4 22:58:33 node1 Keepalived_vrrp[27611]: Stopped
    Oct 4 22:58:33 node1 Keepalived[27609]: Stopped Keepalived v1.3.5 (03/19,2017), git commit v1.3.5-6-g6fa32f2
    Oct 4 22:58:34 node1 ntpd[1313]: Deleting interface #13 eth0, 192.168.0.10#123, interface stats: received=0, sent=0, dropped=0, active_time=532 secs
    Oct 4 22:58:34 node1 ntpd[1313]: peers refreshed

对应的Master上的VIP也会消失：

[root@node1 ~]# ip add show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:5e:7a:f7 brd ff:ff:ff:ff:ff:ff
        inet 192.168.0.8/18 brd 10.198.255.255 scope global eth0
        inet6 fe80::f816:3eff:fe5e:7af7/64 scope link 
           valid_lft forever preferred_lft forever

Master关闭后，Backup会提升为新的Master，对应的日志为：

Oct 4 22:58:15 node2 Keepalived_vrrp[2352]: VRRP_Instance(VI_1) Transition to MASTER STATE
    Oct 4 22:58:16 node2 Keepalived_vrrp[2352]: VRRP_Instance(VI_1) Entering MASTER STATE
    Oct 4 22:58:16 node2 Keepalived_vrrp[2352]: VRRP_Instance(VI_1) setting protocol VIPs.

可以看到新的Master节点上虚拟出了VIP如下所示：

[root@node2 ~]# ip add show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN 
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:23:ac:ec brd ff:ff:ff:ff:ff:ff
        inet 192.168.0.9/18 brd 10.198.255.255 scope global eth0
        inet 192.168.0.10/32 scope global eth0
        inet6 fe80::f816:3eff:fe23:acec/64 scope link 
           valid_lft forever preferred_lft forever

[http_www.keepalived.org_download.html]: http://www.keepalived.org/download.html
[SouthEast]: /images/20220130/9faba0f444e14f9d9a67cc94cb0a2870.png