【微服务架构 - 14 - FastDFS】01 安装 FastDFS

浅浅的花香味﹌ 2022-03-11 02:28 241阅读 0赞

#### 环境准备 ####

--------------------

需要以下文件：

*  libfastcommon.tar.gz: FastDFS分离出的一些公用函数包
 *  fastdfs-5.11.tar.gz: FastDFS本体
 *  nginx-1.13.6.tar.gz: nginx
 *  fastdfs-nginx-module\_v1.16.tar.gz: FastDFS和nginx的关联模块

这些文件在 FastDFS 作者 GitHub 上都有：

[https://github.com/happyfish100][https_github.com_happyfish100]

#### 创建工作目录 ####

--------------------

创建 `/usr/local/docker/fastdfs/environment` 目录

*  `/usr/local/docker/fastdfs`: 存放 `docker-compose.yml` 配置文件以及 FastDFS 的数据卷
 *  `/usr/local/docker/fastdfs/environment`: 存放 `Dockerfile` 镜像配置文件及 FastDFS 所需环境

##### docker-compose.yml #####

version: '3.1'
    services:
     fastdfs:
       build: environment
       restart: always
       container_name: fastdfs
       volumes:
         - ./storage:/fastdfs/storage
       network_mode: host

##### Dockerfile #####

FROM ubuntu:xenial
    
    # 更新数据源
    WORKDIR /etc/apt
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse' > sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse' >> sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse' >> sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse' >> sources.list
    RUN apt-get update
    
    # 安装依赖
    RUN apt-get install make gcc libpcre3-dev zlib1g-dev --assume-yes
    
    # 复制工具包
    ADD fastdfs-5.11.tar.gz /usr/local/src
    ADD fastdfs-nginx-module_v1.16.tar.gz /usr/local/src
    ADD libfastcommon.tar.gz /usr/local/src
    ADD nginx-1.13.6.tar.gz /usr/local/src
    
    # 安装 libfastcommon
    WORKDIR /usr/local/src/libfastcommon
    RUN ./make.sh && ./make.sh install
    
    # 安装 FastDFS
    WORKDIR /usr/local/src/fastdfs-5.11
    RUN ./make.sh && ./make.sh install
    
    # 配置 FastDFS 跟踪器
    ADD tracker.conf /etc/fdfs
    RUN mkdir -p /fastdfs/tracker
    
    # 配置 FastDFS 存储
    ADD storage.conf /etc/fdfs
    RUN mkdir -p /fastdfs/storage
    
    # 配置 FastDFS 客户端
    ADD client.conf /etc/fdfs
    
    # 配置 fastdfs-nginx-module
    ADD config /usr/local/src/fastdfs-nginx-module/src
    
    # FastDFS 与 Nginx 集成
    WORKDIR /usr/local/src/nginx-1.13.6
    RUN ./configure --add-module=/usr/local/src/fastdfs-nginx-module/src
    RUN make && make install
    ADD mod_fastdfs.conf /etc/fdfs
    
    WORKDIR /usr/local/src/fastdfs-5.11/conf
    RUN cp http.conf mime.types /etc/fdfs/
    
    # 配置 Nginx
    ADD nginx.conf /usr/local/nginx/conf
    
    COPY entrypoint.sh /usr/local/bin/
    ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
    s
    WORKDIR /
    EXPOSE 8888
    CMD ["/bin/bash"]

##### [entrypoint.sh][] #####

#!/bin/sh
    /etc/init.d/fdfs_trackerd start
    /etc/init.d/fdfs_storaged start
    /usr/local/nginx/sbin/nginx -g 'daemon off;'

使用 `chmod +x entrypoint.sh`，赋予执行的权限

#### 各种配置文件 ####

--------------------

###### tracker.conf ######

# is this config file disabled
    # false for enabled
    # true for disabled
    disabled=false
    
    # bind an address of this host
    # empty for bind all addresses of this host
    bind_addr=
    
    # the tracker server port
    port=22122
    
    # connect timeout in seconds
    # default value is 30s
    connect_timeout=30
    
    # network timeout in seconds
    # default value is 30s
    network_timeout=60
    
    # the base path to store data and log files
    base_path=/fastdfs/tracker
    
    # max concurrent connections this server supported
    max_connections=256
    
    # accept thread count
    # default value is 1
    # since V4.07
    accept_threads=1
    
    # work thread count, should <= max_connections
    # default value is 4
    # since V2.00
    work_threads=4
    
    # min buff size
    # default value 8KB
    min_buff_size = 8KB
    
    # max buff size
    # default value 128KB
    max_buff_size = 128KB
    
    # the method of selecting group to upload files
    # 0: round robin
    # 1: specify group
    # 2: load balance, select the max free space group to upload file
    store_lookup=2
    
    # which group to upload file
    # when store_lookup set to 1, must set store_group to the group name
    store_group=group2
    
    # which storage server to upload file
    # 0: round robin (default)
    # 1: the first server order by ip address
    # 2: the first server order by priority (the minimal)
    # Note: if use_trunk_file set to true, must set store_server to 1 or 2
    store_server=0
    
    # which path(means disk or mount point) of the storage server to upload file
    # 0: round robin
    # 2: load balance, select the max free space path to upload file
    store_path=0
    
    # which storage server to download file
    # 0: round robin (default)
    # 1: the source storage server which the current file uploaded to
    download_server=0
    
    # reserved storage space for system or other applications.
    # if the free(available) space of any stoarge server in 
    # a group <= reserved_storage_space, 
    # no file can be uploaded to this group.
    # bytes unit can be one of follows:
    ### G or g for gigabyte(GB)
    ### M or m for megabyte(MB)
    ### K or k for kilobyte(KB)
    ### no unit for byte(B)
    ### XX.XX% as ratio such as reserved_storage_space = 10%
    reserved_storage_space = 10%
    
    #standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level=info
    
    #unix group name to run this program, 
    #not set (empty) means run by the group of current user
    run_by_group=
    
    #unix username to run this program,
    #not set (empty) means run by current user
    run_by_user=
    
    # allow_hosts can ocur more than once, host can be hostname or ip address,
    # "*" (only one asterisk) means match all ip addresses
    # we can use CIDR ips like 192.168.5.64/26
    # and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
    # for example:
    # allow_hosts=10.0.1.[1-15,20]
    # allow_hosts=host[01-08,20-25].domain.com
    # allow_hosts=192.168.5.64/26
    allow_hosts=*
    
    # sync log buff to disk every interval seconds
    # default value is 10 seconds
    sync_log_buff_interval = 10
    
    # check storage server alive interval seconds
    check_active_interval = 120
    
    # thread stack size, should >= 64KB
    # default value is 64KB
    thread_stack_size = 64KB
    
    # auto adjust when the ip address of the storage server changed
    # default value is true
    storage_ip_changed_auto_adjust = true
    
    # storage sync file max delay seconds
    # default value is 86400 seconds (one day)
    # since V2.00
    storage_sync_file_max_delay = 86400
    
    # the max time of storage sync a file
    # default value is 300 seconds
    # since V2.00
    storage_sync_file_max_time = 300
    
    # if use a trunk file to store several small files
    # default value is false
    # since V3.00
    use_trunk_file = false 
    
    # the min slot size, should <= 4KB
    # default value is 256 bytes
    # since V3.00
    slot_min_size = 256
    
    # the max slot size, should > slot_min_size
    # store the upload file to trunk file when it's size <=  this value
    # default value is 16MB
    # since V3.00
    slot_max_size = 16MB
    
    # the trunk file size, should >= 4MB
    # default value is 64MB
    # since V3.00
    trunk_file_size = 64MB
    
    # if create trunk file advancely
    # default value is false
    # since V3.06
    trunk_create_file_advance = false
    
    # the time base to create trunk file
    # the time format: HH:MM
    # default value is 02:00
    # since V3.06
    trunk_create_file_time_base = 02:00
    
    # the interval of create trunk file, unit: second
    # default value is 38400 (one day)
    # since V3.06
    trunk_create_file_interval = 86400
    
    # the threshold to create trunk file
    # when the free trunk file size less than the threshold, will create 
    # the trunk files
    # default value is 0
    # since V3.06
    trunk_create_file_space_threshold = 20G
    
    # if check trunk space occupying when loading trunk free spaces
    # the occupied spaces will be ignored
    # default value is false
    # since V3.09
    # NOTICE: set this parameter to true will slow the loading of trunk spaces 
    # when startup. you should set this parameter to true when neccessary.
    trunk_init_check_occupying = false
    
    # if ignore storage_trunk.dat, reload from trunk binlog
    # default value is false
    # since V3.10
    # set to true once for version upgrade when your version less than V3.10
    trunk_init_reload_from_binlog = false
    
    # the min interval for compressing the trunk binlog file
    # unit: second
    # default value is 0, 0 means never compress
    # FastDFS compress the trunk binlog when trunk init and trunk destroy
    # recommand to set this parameter to 86400 (one day)
    # since V5.01
    trunk_compress_binlog_min_interval = 0
    
    # if use storage ID instead of IP address
    # default value is false
    # since V4.00
    use_storage_id = false
    
    # specify storage ids filename, can use relative or absolute path
    # since V4.00
    storage_ids_filename = storage_ids.conf
    
    # id type of the storage server in the filename, values are:
    ## ip: the ip address of the storage server
    ## id: the server id of the storage server
    # this paramter is valid only when use_storage_id set to true
    # default value is ip
    # since V4.03
    id_type_in_filename = ip
    
    # if store slave file use symbol link
    # default value is false
    # since V4.01
    store_slave_file_use_link = false
    
    # if rotate the error log every day
    # default value is false
    # since V4.02
    rotate_error_log = false
    
    # rotate error log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.02
    error_log_rotate_time=00:00
    
    # rotate error log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_error_log_size = 0
    
    # keep days of the log files
    # 0 means do not delete old log files
    # default value is 0
    log_file_keep_days = 0
    
    # if use connection pool
    # default value is false
    # since V4.05
    use_connection_pool = false
    
    # connections whose the idle time exceeds this time will be closed
    # unit: second
    # default value is 3600
    # since V4.05
    connection_pool_max_idle_time = 3600
    
    # HTTP port on this tracker server
    http.server_port=8080
    
    # check storage HTTP server alive interval seconds
    # <= 0 for never check
    # default value is 30
    http.check_alive_interval=30
    
    # check storage HTTP server alive type, values are:
    #   tcp : connect to the storge server with HTTP port only, 
    #        do not request and get response
    #   http: storage check alive url must return http status 200
    # default value is tcp
    http.check_alive_type=tcp
    
    # check storage HTTP server alive uri/url
    # NOTE: storage embed HTTP server support uri: /status.html
    http.check_alive_uri=/status.html

##### storage.conf #####

# is this config file disabled
    # false for enabled
    # true for disabled
    disabled=false
    
    # the name of the group this storage server belongs to
    #
    # comment or remove this item for fetching from tracker server,
    # in this case, use_storage_id must set to true in tracker.conf,
    # and storage_ids.conf must be configed correctly.
    group_name=group1
    
    # bind an address of this host
    # empty for bind all addresses of this host
    bind_addr=
    
    # if bind an address of this host when connect to other servers 
    # (this storage server as a client)
    # true for binding the address configed by above parameter: "bind_addr"
    # false for binding any address of this host
    client_bind=true
    
    # the storage server port
    port=23000
    
    # connect timeout in seconds
    # default value is 30s
    connect_timeout=30
    
    # network timeout in seconds
    # default value is 30s
    network_timeout=60
    
    # heart beat interval in seconds
    heart_beat_interval=30
    
    # disk usage report interval in seconds
    stat_report_interval=60
    
    # the base path to store data and log files
    base_path=/fastdfs/storage
    
    # max concurrent connections the server supported
    # default value is 256
    # more max_connections means more memory will be used
    max_connections=256
    
    # the buff size to recv / send data
    # this parameter must more than 8KB
    # default value is 64KB
    # since V2.00
    buff_size = 256KB
    
    # accept thread count
    # default value is 1
    # since V4.07
    accept_threads=1
    
    # work thread count, should <= max_connections
    # work thread deal network io
    # default value is 4
    # since V2.00
    work_threads=4
    
    # if disk read / write separated
    ##  false for mixed read and write
    ##  true for separated read and write
    # default value is true
    # since V2.00
    disk_rw_separated = true
    
    # disk reader thread count per store base path
    # for mixed read / write, this parameter can be 0
    # default value is 1
    # since V2.00
    disk_reader_threads = 1
    
    # disk writer thread count per store base path
    # for mixed read / write, this parameter can be 0
    # default value is 1
    # since V2.00
    disk_writer_threads = 1
    
    # when no entry to sync, try read binlog again after X milliseconds
    # must > 0, default value is 200ms
    sync_wait_msec=50
    
    # after sync a file, usleep milliseconds
    # 0 for sync successively (never call usleep)
    sync_interval=0
    
    # storage sync start time of a day, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    sync_start_time=00:00
    
    # storage sync end time of a day, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    sync_end_time=23:59
    
    # write to the mark file after sync N files
    # default value is 500
    write_mark_file_freq=500
    
    # path(disk or mount point) count, default value is 1
    store_path_count=1
    
    # store_path#, based 0, if store_path0 not exists, it's value is base_path
    # the paths must be exist
    store_path0=/fastdfs/storage
    #store_path1=/home/yuqing/fastdfs2
    
    # subdir_count  * subdir_count directories will be auto created under each 
    # store_path (disk), value can be 1 to 256, default value is 256
    subdir_count_per_path=256
    
    # tracker_server can ocur more than once, and tracker_server format is
    #  "host:port", host can be hostname or ip address
    tracker_server=192.168.106.128:22122
    
    #standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level=info
    
    #unix group name to run this program, 
    #not set (empty) means run by the group of current user
    run_by_group=
    
    #unix username to run this program,
    #not set (empty) means run by current user
    run_by_user=
    
    # allow_hosts can ocur more than once, host can be hostname or ip address,
    # "*" (only one asterisk) means match all ip addresses
    # we can use CIDR ips like 192.168.5.64/26
    # and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
    # for example:
    # allow_hosts=10.0.1.[1-15,20]
    # allow_hosts=host[01-08,20-25].domain.com
    # allow_hosts=192.168.5.64/26
    allow_hosts=*
    
    # the mode of the files distributed to the data path
    # 0: round robin(default)
    # 1: random, distributted by hash code
    file_distribute_path_mode=0
    
    # valid when file_distribute_to_path is set to 0 (round robin), 
    # when the written file count reaches this number, then rotate to next path
    # default value is 100
    file_distribute_rotate_count=100
    
    # call fsync to disk when write big file
    # 0: never call fsync
    # other: call fsync when written bytes >= this bytes
    # default value is 0 (never call fsync)
    fsync_after_written_bytes=0
    
    # sync log buff to disk every interval seconds
    # must > 0, default value is 10 seconds
    sync_log_buff_interval=10
    
    # sync binlog buff / cache to disk every interval seconds
    # default value is 60 seconds
    sync_binlog_buff_interval=10
    
    # sync storage stat info to disk every interval seconds
    # default value is 300 seconds
    sync_stat_file_interval=300
    
    # thread stack size, should >= 512KB
    # default value is 512KB
    thread_stack_size=512KB
    
    # the priority as a source server for uploading file.
    # the lower this value, the higher its uploading priority.
    # default value is 10
    upload_priority=10
    
    # the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
    # multi aliases split by comma. empty value means auto set by OS type
    # default values is empty
    if_alias_prefix=
    
    # if check file duplicate, when set to true, use FastDHT to store file indexes
    # 1 or yes: need check
    # 0 or no: do not check
    # default value is 0
    check_file_duplicate=0
    
    # file signature method for check file duplicate
    ## hash: four 32 bits hash code
    ## md5: MD5 signature
    # default value is hash
    # since V4.01
    file_signature_method=hash
    
    # namespace for storing file indexes (key-value pairs)
    # this item must be set when check_file_duplicate is true / on
    key_namespace=FastDFS
    
    # set keep_alive to 1 to enable persistent connection with FastDHT servers
    # default value is 0 (short connection)
    keep_alive=0
    
    # you can use "#include filename" (not include double quotes) directive to 
    # load FastDHT server list, when the filename is a relative path such as 
    # pure filename, the base path is the base path of current/this config file.
    # must set FastDHT server list when check_file_duplicate is true / on
    # please see INSTALL of FastDHT for detail
    ##include /home/yuqing/fastdht/conf/fdht_servers.conf
    
    # if log to access log
    # default value is false
    # since V4.00
    use_access_log = false
    
    # if rotate the access log every day
    # default value is false
    # since V4.00
    rotate_access_log = false
    
    # rotate access log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.00
    access_log_rotate_time=00:00
    
    # if rotate the error log every day
    # default value is false
    # since V4.02
    rotate_error_log = false
    
    # rotate error log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.02
    error_log_rotate_time=00:00
    
    # rotate access log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_access_log_size = 0
    
    # rotate error log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_error_log_size = 0
    
    # keep days of the log files
    # 0 means do not delete old log files
    # default value is 0
    log_file_keep_days = 0
    
    # if skip the invalid record when sync file
    # default value is false
    # since V4.02
    file_sync_skip_invalid_record=false
    
    # if use connection pool
    # default value is false
    # since V4.05
    use_connection_pool = false
    
    # connections whose the idle time exceeds this time will be closed
    # unit: second
    # default value is 3600
    # since V4.05
    connection_pool_max_idle_time = 3600
    
    # use the ip address of this storage server if domain_name is empty,
    # else this domain name will ocur in the url redirected by the tracker server
    http.domain_name=
    
    # the port of the web server on this storage server
    http.server_port=8888

##### client.conf #####

# connect timeout in seconds
    # default value is 30s
    connect_timeout=30
    
    # network timeout in seconds
    # default value is 30s
    network_timeout=60
    
    # the base path to store log files
    base_path=/fastdfs/tracker
    
    # tracker_server can ocur more than once, and tracker_server format is
    #  "host:port", host can be hostname or ip address
    tracker_server=192.168.106.128:22122
    
    #standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level=info
    
    # if use connection pool
    # default value is false
    # since V4.05
    use_connection_pool = false
    
    # connections whose the idle time exceeds this time will be closed
    # unit: second
    # default value is 3600
    # since V4.05
    connection_pool_max_idle_time = 3600
    
    # if load FastDFS parameters from tracker server
    # since V4.05
    # default value is false
    load_fdfs_parameters_from_tracker=false
    
    # if use storage ID instead of IP address
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # default value is false
    # since V4.05
    use_storage_id = false
    
    # specify storage ids filename, can use relative or absolute path
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # since V4.05
    storage_ids_filename = storage_ids.conf
    
    
    #HTTP settings
    http.tracker_server_port=80
    
    #use "#include" directive to include HTTP other settiongs
    ##include http.conf

##### config #####

ngx_addon_name=ngx_http_fastdfs_module
    HTTP_MODULES="$HTTP_MODULES ngx_http_fastdfs_module"
    NGX_ADDON_SRCS="$NGX_ADDON_SRCS $ngx_addon_dir/ngx_http_fastdfs_module.c"
    CORE_INCS="$CORE_INCS /usr/include/fastdfs /usr/include/fastcommon/"
    CORE_LIBS="$CORE_LIBS -L/usr/lib -lfastcommon -lfdfsclient"
    CFLAGS="$CFLAGS -D_FILE_OFFSET_BITS=64 -DFDFS_OUTPUT_CHUNK_SIZE='256*1024' -DFDFS_MOD_CONF_FILENAME='\"/etc/fdfs/mod_fastdfs.conf\"'"

##### mod\_fastdfs.conf #####

# connect timeout in seconds
    # default value is 30s
    connect_timeout=10
    
    # network recv and send timeout in seconds
    # default value is 30s
    network_timeout=30
    
    # the base path to store log files
    base_path=/tmp
    
    # if load FastDFS parameters from tracker server
    # since V1.12
    # default value is false
    load_fdfs_parameters_from_tracker=true
    
    # storage sync file max delay seconds
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # since V1.12
    # default value is 86400 seconds (one day)
    storage_sync_file_max_delay = 86400
    
    # if use storage ID instead of IP address
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # default value is false
    # since V1.13
    use_storage_id = false
    
    # specify storage ids filename, can use relative or absolute path
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # since V1.13
    storage_ids_filename = storage_ids.conf
    
    # FastDFS tracker_server can ocur more than once, and tracker_server format is
    #  "host:port", host can be hostname or ip address
    # valid only when load_fdfs_parameters_from_tracker is true
    tracker_server=192.168.106.128:22122
    
    # the port of the local storage server
    # the default value is 23000
    storage_server_port=23000
    
    # the group name of the local storage server
    group_name=group1
    
    # if the url / uri including the group name
    # set to false when uri like /M00/00/00/xxx
    # set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
    # default value is false
    url_have_group_name = true
    
    # path(disk or mount point) count, default value is 1
    # must same as storage.conf
    store_path_count=1
    
    # store_path#, based 0, if store_path0 not exists, it's value is base_path
    # the paths must be exist
    # must same as storage.conf
    store_path0=/fastdfs/storage
    #store_path1=/home/yuqing/fastdfs1
    
    # standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level=info
    
    # set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
    # empty for output to stderr (apache and nginx error_log file)
    log_filename=
    
    # response mode when the file not exist in the local file system
    ## proxy: get the content from other storage server, then send to client
    ## redirect: redirect to the original storage server (HTTP Header is Location)
    response_mode=proxy
    
    # the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
    # multi aliases split by comma. empty value means auto set by OS type
    # this paramter used to get all ip address of the local host
    # default values is empty
    if_alias_prefix=
    
    # use "#include" directive to include HTTP config file
    # NOTE: #include is an include directive, do NOT remove the # before include
    #include http.conf
    
    
    # if support flv
    # default value is false
    # since v1.15
    flv_support = true
    
    # flv file extension name
    # default value is flv
    # since v1.15
    flv_extension = flv
    
    
    # set the group count
    # set to none zero to support multi-group
    # set to 0  for single group only
    # groups settings section as [group1], [group2], ..., [groupN]
    # default value is 0
    # since v1.14
    group_count = 0
    
    # group settings for group #1
    # since v1.14
    # when support multi-group, uncomment following section
    #[group1]
    #group_name=group1
    #storage_server_port=23000
    #store_path_count=2
    #store_path0=/home/yuqing/fastdfs
    #store_path1=/home/yuqing/fastdfs1
    
    # group settings for group #2
    # since v1.14
    # when support multi-group, uncomment following section as neccessary
    #[group2]
    #group_name=group2
    #storage_server_port=23000
    #store_path_count=1
    #store_path0=/home/yuqing/fastdfs

##### nginx.conf #####

user  root;
    worker_processes  1;
    
    #error_log  logs/error.log;
    #error_log  logs/error.log  notice;
    #error_log  logs/error.log  info;
    
    #pid        logs/nginx.pid;
    
    
    events {
        worker_connections  1024;
    }
    
    
    http {
        include       mime.types;
        default_type  application/octet-stream;
    
        #log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
        #                  '$status $body_bytes_sent "$http_referer" '
        #                  '"$http_user_agent" "$http_x_forwarded_for"';
    
        #access_log  logs/access.log  main;
    
        sendfile        on;
        #tcp_nopush     on;
    
        #keepalive_timeout  0;
        keepalive_timeout  65;
    
        #gzip  on;
    
        server {
            listen       8888;
            server_name  localhost;
    
            #charset koi8-r;
    
            #access_log  logs/host.access.log  main;
    
            location ~/group([0-9])/M00 {
                ngx_fastdfs_module;
            }
    
            #error_page  404              /404.html;
    
            # redirect server error pages to the static page /50x.html
            #
            error_page   500 502 503 504  /50x.html;
            location = /50x.html {
                root   html;
            }
    
            # proxy the PHP scripts to Apache listening on 127.0.0.1:80
            #
            #location ~ \.php$ {
            #    proxy_pass   http://127.0.0.1;
            #}
    
            # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
            #
            #location ~ \.php$ {
            #    root           html;
            #    fastcgi_pass   127.0.0.1:9000;
            #    fastcgi_index  index.php;
            #    fastcgi_param  SCRIPT_FILENAME  /scripts$fastcgi_script_name;
            #    include        fastcgi_params;
            #}
    
            # deny access to .htaccess files, if Apache's document root
            # concurs with nginx's one
            #
            #location ~ /\.ht {
            #    deny  all;
            #}
        }
    
    
        # another virtual host using mix of IP-, name-, and port-based configuration
        #
        #server {
        #    listen       8000;
        #    listen       somename:8080;
        #    server_name  somename  alias  another.alias;
    
        #    location / {
        #        root   html;
        #        index  index.html index.htm;
        #    }
        #}
    
    
        # HTTPS server
        #
        #server {
        #    listen       443 ssl;
        #    server_name  localhost;
    
        #    ssl_certificate      cert.pem;
        #    ssl_certificate_key  cert.key;
    
        #    ssl_session_cache    shared:SSL:1m;
        #    ssl_session_timeout  5m;
    
        #    ssl_ciphers  HIGH:!aNULL:!MD5;
        #    ssl_prefer_server_ciphers  on;
    
        #    location / {
        #        root   html;
        #        index  index.html index.htm;
        #    }
        #}
    
    }

#### 启动容器 ####

--------------------

docker-compose up -d

#### 测试上传 ####

##### 交互式进入容器 #####

docker exec -it fastdfs /bin/bash

##### 测试文件上传 #####

/usr/bin/fdfs_upload_file /etc/fdfs/client.conf /usr/local/src/fastdfs-5.11/INSTALL

##### 服务器反馈上传地址 #####

group1/M00/00/00/wKhqgFyAA4WAck6TAAAeSwu9TgM8237976

##### 测试试 Nginx 访问 #####

http://192.168.106.128:8888/group1/M00/00/00/wKhqgFyAA4WAck6TAAAeSwu9TgM8237976