VPP安装运行及其运行测试框架

淩亂°似流年 2022-06-06 14:08 291阅读 0赞

参考：[http://blog.csdn.net/shaoyunzhe/article/details/53096932][http_blog.csdn.net_shaoyunzhe_article_details_53096932]  
[http://blog.csdn.net/a464057216/article/details/51889564][http_blog.csdn.net_a464057216_article_details_51889564]  
[http://blog.csdn.net/wangcg123/article/details/71727965][http_blog.csdn.net_wangcg123_article_details_71727965]

下载地址：[https://github.com/FDio/vpp/tree/master][https_github.com_FDio_vpp_tree_master]

git clone 下来

进入 vpp目录  
依次执行命令

make install-dep
    make bootstrap
    make build

设置大页

mkdir /mnt/huge 
    mount -t hugetlbfs nodev /mnt/huge
    echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
    cat /proc/meminfo| grep Huge

之后就可以直接 make run 执行了。  
![这里写图片描述][SouthEast]  
**使用 quit命令退出**  
但是之后要指定配置文件执行就要编译 dpdk了。  
！！！在dpdk的目录下的 Makefile文件中改下配置 将 RTE\_EAL\_IGB\_UIO 设置为y

才会有 igb\_uio.ko 文件

之后加载驱动

modprobe uio
    insmod igb_uio.ko

dmesg

查看 成功没有

绑定网卡，配置文件等，具体可以参考最上面的链接，本人也是指定配置文件会出错，暂时还没搞懂

但我的目的是执行测试框架：  
要执行测试框架只要 make run 可以起来就可以了

在VPP目录下执行

make test

构建执行测试用例

![这里写图片描述][SouthEast 1]

就是这样的

执行 命令

make

可以查看更多执行命令和帮助

root@ubuntu:~/vpp/vpp# make
    Make Targets:
     bootstrap           - prepare tree for build
     install-dep         - install software dependencies
     wipe                - wipe all products of debug build 
     wipe-release        - wipe all products of release build 
     build               - build debug binaries
     build-release       - build release binaries
     build-coverity      - build coverity artifacts
     rebuild             - wipe and build debug binares
     rebuild-release     - wipe and build release binares
     run                 - run debug binary
     run-release         - run release binary
     debug               - run debug binary with debugger
     debug-release       - run release binary with debugger
     test                - build and run (basic) functional tests
     test-debug          - build and run (basic) functional tests (debug build)
     test-all            - build and run (all) functional tests
     test-all-debug      - build and run (all) functional tests (debug build)
     test-shell          - enter shell with test environment
     test-shell-debug    - enter shell with test environment (debug build)
     test-wipe           - wipe files generated by unit tests
     retest              - run functional tests
     retest-debug        - run functional tests (debug build)
     test-help           - show help on test framework
     run-vat             - run vpp-api-test tool
     pkg-deb             - build DEB packages
     pkg-rpm             - build RPM packages
     dpdk-install-dev    - install DPDK development packages
     ctags               - (re)generate ctags database
     gtags               - (re)generate gtags database
     cscope              - (re)generate cscope database
     checkstyle          - check coding style
     fixstyle            - fix coding style
     doxygen             - (re)generate documentation
     bootstrap-doxygen   - setup Doxygen dependencies
     wipe-doxygen        - wipe all generated documentation
     test-doc            - generate documentation for test framework
     test-wipe-doc       - wipe documentation for test framework
     test-cov            - generate code coverage report for test framework
     test-wipe-cov       - wipe code coverage report for test framework
     test-checkstyle     - check PEP8 compliance for test framework
    
    Make Arguments:
     V=[0|1]             - set build verbosity level
     STARTUP_CONF=<path> - startup configuration file
                           (e.g. /etc/vpp/startup.conf)
     STARTUP_DIR=<path>  - startup drectory (e.g. /etc/vpp)
                           It also sets STARTUP_CONF if
                           startup.conf file is present
     GDB=<path>          - gdb binary to use for debugging
     PLATFORM=<name>     - target platform. default is vpp
     TEST=<filter>       - apply filter to test set, see test-help
     SAMPLE_PLUGIN=yes   - in addition build/run/debug sample plugin
    
    Current Argument Values:
     V                 = 
     STARTUP_CONF      = 
     STARTUP_DIR       = /root/vpp/vpp
     GDB               = gdb
     PLATFORM          = vpp
     DPDK_VERSION      = 
     SAMPLE_PLUGIN     = no
    root@ubuntu:~/vpp/vpp#

最重要的如何执行单个测试用例：

make test-shell
    python test_*.py（要执行的单个测试用例）

(virtualenv) root@ubuntu:~/vpp/vpp/test#
    (virtualenv) root@ubuntu:~/vpp/vpp/test# python test_ip4.py
    Running tests using custom test runner
    Active filters: file=None, class=None, function=None
    10 out of 10 tests match specified filters
    Not running extended tests (some tests will be skipped)
    ==============================================================================
    IPv4 disabled
    ==============================================================================
    Starting IP Disabled ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IP Disabled                                                              OK
    ------------------------------------------------------------------------------
    ==============================================================================
    IPv4 Load-Balancing
    ==============================================================================
    Starting IP Load-Balancing ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IP Load-Balancing                                                        OK
    ------------------------------------------------------------------------------
    ==============================================================================
    IPv4 routes via NULL
    ==============================================================================
    Starting IP NULL route ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IP NULL route                                                            OK
    ------------------------------------------------------------------------------
    ==============================================================================
    IPv4 Subnets
    ==============================================================================
    Starting IP Sub Nets ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IP Sub Nets                                                              OK
    ------------------------------------------------------------------------------
    ==============================================================================
    IPv4 VLAN-0
    ==============================================================================
    Starting IP VLAN-0 ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IP VLAN-0                                                                OK
    ------------------------------------------------------------------------------
    ==============================================================================
    IPv4 Test Case
    ==============================================================================
    Starting IPv4 FIB test ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    IPv4 FIB test                                                            OK
    ------------------------------------------------------------------------------
    ==============================================================================
    FIB - add/update/delete - ip4 routes
    ==============================================================================
    Starting Add 1k routes ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    Add 1k routes                                                            OK
    ------------------------------------------------------------------------------
    Starting Delete 100 routes ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    Delete 100 routes                                                        OK
    ------------------------------------------------------------------------------
    Starting Add 1k routes ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    Add 1k routes                                                            OK
    ------------------------------------------------------------------------------
    Starting Delete 1.5k routes ...
    ------------------------------------------------------------------------------
    ------------------------------------------------------------------------------
    Delete 1.5k routes                                                       OK
    ------------------------------------------------------------------------------

所有分析要看 Makefile文件

其实执行测试的是这条

@bash -c "source $(PYTHON_VENV_PATH)/bin/activate && python run_tests.py -d $(TEST_DIR) $(UNITTEST_EXTRA_OPTS)"

构建了python的虚拟环境，然后执行 run\_test 指定目录也就是 test目录。  
期间遇到了很多很多的问题，比如里面的变量很多都是系统变量。开始自己设置各种问题。使用 make retest和 make test-shell可以不用设置。 对Makefile文件也不熟悉，要学习的还很多啊。  
之后会具体分析测试框架

[http_blog.csdn.net_shaoyunzhe_article_details_53096932]: http://blog.csdn.net/shaoyunzhe/article/details/53096932
[http_blog.csdn.net_a464057216_article_details_51889564]: http://blog.csdn.net/a464057216/article/details/51889564
[http_blog.csdn.net_wangcg123_article_details_71727965]: http://blog.csdn.net/wangcg123/article/details/71727965
[https_github.com_FDio_vpp_tree_master]: https://github.com/FDio/vpp/tree/master
[SouthEast]: /images/20220606/ec9f1bf780d34300b7e439b70a7a2f91.png
[SouthEast 1]: /images/20220606/3b34f63340fc47e7aa0c854070a7498d.png