[嵌入式开发模块]MC9S12XEP100 SCI(UART)驱动程序

向右看齐 2022-06-12 23:07 287阅读 0赞

忙着毕设，很久没有写文章了，终于答辩完了，得了个校优秀毕业设计。毕设做的是个智能接口模块，用一周时间入门了MC9S12XEP100的开发，又用一周时间入门了uC/OS-II嵌入式操作系统，在做毕设的过程中学到了很多，现在把一些工具发上来分享。

--------------------

首先先发个自己封装的MC9S12XEP100的SCI模块(也就是UART模块)的驱动。这些代码参考了 Li Yuan [http://blog.csdn.net/liyuanbhu/article/details/7764851][http_blog.csdn.net_liyuanbhu_article_details_7764851] 的代码，整个代码风格是按照uCOS-II操作系统源码的风格来写的，在此表示感谢。  
目前还不是特别完整完善，但基本使用是没有问题了。  
首先是.h文件，除了硬件驱动程序，还有在基于uCOS-II操作系统的SCI驱动程序，这章先讲硬件驱动部分

/*
    *******************************************************************************************
    *
    *
    *                    SCI(Serial Communication Interface) SUPPORT PACKAGE
    *                                   Freescale MC9S12XEP100
    *                           飞思卡尔   MC9S12XEP100  SCI支持包
    *
    * File : SCI_def.h
    * By   : Lin Shijun(http://blog.csdn.net/lin_strong)
    * Date:  2018/02/23
    * version: V2.2
    * History: 2017/04/24  V1.0  the prototype of SCI_uCOS,only support SCI0 and SCI1
    *          2017/07/20  V2.0  a. update the module to support the SCI0 to SCI7
    *                            b. expend the configure option for all SCI port
    *                            c. add SCI_SEND_MULTIBYTE_EN option to ignore SCI_PutLong() and SCI_PutShort()
    *                            d. add many marco error check
    *          2017/10/27  V2.1  fix a bug in SCI_uCos.c
    *          2018/02/23  V2.2  a. optimize the struct referencing to the register
    *                            b. delete some configuration marco, because the unused function will not be linked
    *                               in the project, so there is no need to hide the function.
    *                            c. add more error check.
    *                            d. add a marco(SCI_ARGUMENT_CHECK_EN) to turn off argument check for saving code.
    *                            e. add the support for define buffer in paged addressing area.
    *                            f. use semaphore in replace of the origional mutex, so the user don't need to take
    *                               care of the priority thing. The cost is the possibility of priority inversion.
    *                               But I think it's worth it.
    * NOTE(s):a.refer to Li Yuan's  (http://blog.csdn.net/liyuanbhu/article/details/7764851)
    *                      and 
    *                  uCOS-II's Code
    *         b.记得把SCI_uCOS.s中的SCIx_RxTxISR中断服务程序指向对应的中断向量地址
    *                  this SCI PACKAGE include files —— SCI_def.h, SCI.c, SCI_uCos.c, SCI_uCos.s
    *                  这个SCI 开发包有以下文件：SCI_def.h,SCI.c,SCI_uCos.c, SCI_uCos.s
    *         c.记得把SCI_uCOS.s中不用的端口的中断服务程序删掉，因为汇编程序就算不使用，编译器也不会自动帮忙优化掉。
    *********************************************************************************************
    */
    
    #ifndef   SCI_DEF_H
    #define   SCI_DEF_H
    
    /*
    ********************************************************************************************
    *                                   MISCELLANEOUS
    ********************************************************************************************
    */
    
    #ifndef  FALSE
    #define  FALSE    0
    #endif
    
    #ifndef  TRUE
    #define  TRUE     1
    #endif
    
    /*
    *******************************************************************************************
    *                              MAIN  CONFIGURE 主配置
    *******************************************************************************************
    */
    
    #define   SCI_MODULE_ENABLE        TRUE        /*   TRUE: 启用SCI驱动模块        */
    #define   SCI_UCOS_MODULE_ENABLE   TRUE        /*  TRUE: 启用基于uCOS-II的SCI驱动  */
    
    /*
    *******************************************************************************************
    *                                    INCLUDES
    *******************************************************************************************
    */
    
    #include <MC9S12XEP100.h>
    
    #if(SCI_UCOS_MODULE_ENABLE == TRUE)
       #include <ucos_ii.h> 
    #endif 
    
    /*
    ******************************************************************************************
    *                                    CONSTANT
    ******************************************************************************************
    */
    
    #define   SCI0      0x00                         /*   SCI0           */
    #define   SCI1      0x01                         /*   SCI1           */
    #define   SCI2      0x02                         /*   SCI2           */
    #define   SCI3      0x03                         /*   SCI3           */
    #define   SCI4      0x04                         /*   SCI4           */
    #define   SCI5      0x05                         /*   SCI5           */
    #define   SCI6      0x06                         /*   SCI6           */
    #define   SCI7      0x07                         /*   SCI7           */
    
    // PARITY BIT
    #define   SCI_PARITY_NO       0
    #define   SCI_PARITY_EVEN     1
    #define   SCI_PARITY_ODD      2
    
    // ENDIAN
    #define   SCI_ENDIAN_LITTLE   0 
    #define   SCI_ENDIAN_BIG      1
    
    /*
    ****************************************************************************************
    *                                  ERROR CODES
    ****************************************************************************************
    */
    
    #define  SCI_NO_ERR            0        /* Function call was successful                       */  
    #define  SCI_BAD_CH            1        /* Invalid communications port channel                */  
    #define  SCI_RX_EMPTY          2        /* Rx buffer is empty, no character available         */  
    #define  SCI_TX_FULL           3        /* Tx buffer is full, could not deposit character     */  
    #define  SCI_TX_EMPTY          4        /* If the Tx buffer is empty.                         */  
    #define  SCI_RX_TIMEOUT        5        /* If a timeout occurred while waiting for a character*/  
    #define  SCI_TX_TIMEOUT        6        /* If a timeout occurred while waiting to send a char.*/
    #define  SCI_PEND_ISR          7
    #define  SCI_PEND_LOCKED       8      /* If you called this function when the scheduler is locked*/
    //#define  SCI_PARITY_NONE       0      /* Defines for setting parity                         */  
    #define  SCI_ERR_UNKNOWN       9
    
    
    /*
    ******************************************************************************************
    *                                  TYPE DEFINITION
    ******************************************************************************************
    */
    
    // struct of SCI register
    typedef struct{
      SCI0BDSTR   BD;
      SCI0ACR2STR CR1;
      SCI0CR2STR  CR2;
      SCI0SR1STR  SR1;
      SCI0SR2STR  SR2;
      SCI0DRHSTR  DRH;
      SCI0DRLSTR  DRL;
    } SCISTR,*pSCISTR;
    
    #define SCIBD(i)  (pSCI(i)->BD.Word)
    #define SCICR1(i) (pSCI(i)->CR1.Byte)
    #define SCICR2(i) (pSCI(i)->CR2.Byte)
    #define SCISR1(i) (pSCI(i)->SR1.Byte)
    #define SCISR2(i) (pSCI(i)->SR2.Byte)
    #define SCIDRH(i) (pSCI(i)->DRH.Byte)
    #define SCIDRL(i) (pSCI(i)->DRL.Byte)
    
    /*
    ******************************************************************************************
    *                         REGISTER VARIABLE DECLARATION(INTERNAL USE)
    ******************************************************************************************
    */
    
    // Map to SCI register
    extern   pSCISTR const Ptr_SCI[];
    #define  SCI_CNT     8
    #define  pSCI(port)  (Ptr_SCI[port])
    
    /*
    ******************************************************************************************
    *                                 Configure    配置
    ******************************************************************************************
    */
    
    #define SCI_ARGUMENT_CHECK_EN      TRUE   // TRUE: arguments will be checked, however,this will 
                                              //       cause a little code volume.
    
    /************   硬件驱动    **************/
    #define SCI_INIT_DYNAMIC FALSE    /*    (TRUE):include function for dynamic Initialize SCI:...
                                       ...SCI_Init(unsigned char port, unsigned long baudRate, unsigned long busClk)...
                                       ...(FALSE):include function:void SCI_Init(unsigned char port), ...
                                       ... use the argument below to initialize SCI*/
         /* The argument to initialize SCI when SCI_INIT_DYNAMIC == FALSE ...
         ...  当SCI_INIT_DYNAMIC为FALSE时直接使用以下参数初始化SCI*/                                                                 
         #if(SCI_INIT_DYNAMIC != TRUE)  
              #define   SCI_BAUDRATE       9600           
              #define   SCI_BUSCLK         32000000L  
              #define   SCI_DATABIT        8                   /*Data bits,  8 or 9; 数据位,8 或9位*/
              #define   SCI_PARITY         SCI_PARITY_NO     /*SCI_PARITY_NO for disable Parity,SCI_PARITY_EVEN...
                                                               for Even Parity, SCI_ODD_PARITY for Odd Parity;
                                                               SCI_PARITY_NO  静止奇偶校验,SCI_PARITY_EVEN 启用奇校验,...
                                                               ... SCI_PARITY_ODD 启用偶校验*/
         #endif   // of (SCI_INIT_DYNAMIC != TRUE)
    
    #define SCI_SEND_ENDIANNESS    SCI_ENDIAN_BIG   /* the endianness when send mult-byte type; (see SCI_ENDIAN_XXX)
                                                        设置发送多字节类型时使用的字节序*/
    
    /************   RTOS驱动    **************/
    
    #define SCI_RX_BUFFER_SIZE     25                  /* Number of characters in Rx ring buffer  by default */
    #define SCI_TX_BUFFER_SIZE     25                  /* Number of characters in Tx ring buffer  by default */
    
    #define SCI0_UCOS_CODE_EN          TRUE             /*   (TRUE):include codes for SCI0;(TRUE):包含SCI0的代码            */
      #define SCI0_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE  /* the size of receive buffer for SCI0; 0: turn off receive buffer for SCI0;
                                                           SCI0的接收缓冲区大小; 0表示SCI0不使用接收缓冲区 */
      #define SCI0_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE  /* the size of transmit buffer for SCI0; 0: turn off transmit buffer for SCI0;
                                                           SCI0的发送缓冲区大小; 0表示SCI0不使用发送缓冲区 */
    
    #define SCI1_UCOS_CODE_EN          TRUE           /*   (TRUE):include codes for SCI1;(TRUE):包含SCI1的代码            */
      #define SCI1_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE  /* the size of receive buffer for SCI1; 0: turn off receive buffer for SCI1;
                                                         SCI1的接收缓冲区大小; 0表示SCI1不使用接收缓冲区 */
      #define SCI1_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE  /* the size of transmit buffer for SCI1; 0: turn off transmit buffer for SCI1;
                                                         SCI1的发送缓冲区大小; 0表示SCI1不使用发送缓冲区 */
    
    
    #define SCI2_UCOS_CODE_EN          FALSE           /*   (TRUE):include codes for SCI2;(TRUE):包含SCI2的代码            */
      #define SCI2_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE /* the size of receive buffer for SCI2; 0: turn off receive buffer for SCI2;
                                                         SCI2的接收缓冲区大小; 0表示SCI2不使用接收缓冲区 */
      #define SCI2_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE /* the size of transmit buffer for SCI2; 0: turn off transmit buffer for SCI2;
                                                         SCI2的发送缓冲区大小; 0表示SCI2不使用发送缓冲区 */
    
    #define SCI3_UCOS_CODE_EN          FALSE           /*   (TRUE):include codes for SCI3;(TRUE):包含SCI3的代码            */
      #define SCI3_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE /* the size of receive buffer for SCI3; 0: turn off receive buffer for SCI3;
                                                         SCI3的接收缓冲区大小; 0表示SCI3不使用接收缓冲区 */
      #define SCI3_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE /* the size of transmit buffer for SCI3; 0: turn off transmit buffer for SCI3;
                                                         SCI3的发送缓冲区大小; 0表示SCI3不使用发送缓冲区 */
    
    #define SCI4_UCOS_CODE_EN          FALSE             /*   (TRUE):include codes for SCI4;(TRUE):包含SCI4的代码            */
      #define SCI4_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE  /* the size of receive buffer for SCI4; 0: turn off receive buffer for SCI4;
                                                           SCI4的接收缓冲区大小; 0表示SCI4不使用接收缓冲区 */
      #define SCI4_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE           /* the size of transmit buffer for SCI4; 0: turn off transmit buffer for SCI4;
                                                           SCI4的发送缓冲区大小; 0表示SCI4不使用发送缓冲区 */
    
    #define SCI5_UCOS_CODE_EN          FALSE              /*   (TRUE):include codes for SCI5;(TRUE):包含SCI5的代码            */
      #define SCI5_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE /* the size of receive buffer for SCI5; 0: turn off receive buffer for SCI5;
                                                         SCI5的接收缓冲区大小; 0表示SCI5不使用接收缓冲区 */
      #define SCI5_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE /* the size of transmit buffer for SCI5; 0: turn off transmit buffer for SCI5;
                                                         SCI5的发送缓冲区大小; 0表示SCI5不使用发送缓冲区 */
    
    #define SCI6_UCOS_CODE_EN          FALSE              /*   (TRUE):include codes for SCI6;(TRUE):包含SCI6的代码            */
      #define SCI6_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE /* the size of receive buffer for SCI6; 0: turn off receive buffer for SCI6;
                                                         SCI6的接收缓冲区大小; 0表示SCI6不使用接收缓冲区 */
      #define SCI6_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE /* the size of transmit buffer for SCI6; 0: turn off transmit buffer for SCI6;
                                                         SCI6的发送缓冲区大小; 0表示SCI6不使用发送缓冲区 */
    
    #define SCI7_UCOS_CODE_EN          FALSE             /*   (TRUE):include codes for SCI7;(TRUE):包含SCI7的代码            */
      #define SCI7_RX_BUFFER_SIZE      SCI_RX_BUFFER_SIZE /* the size of receive buffer for SCI7; 0: turn off receive buffer for SCI7;
                                                         SCI7的接收缓冲区大小; 0表示SCI7不使用接收缓冲区 */
      #define SCI7_TX_BUFFER_SIZE      SCI_TX_BUFFER_SIZE /* the size of transmit buffer for SCI7; 0: turn off transmit buffer for SCI7;
                                                         SCI7的发送缓冲区大小; 0表示SCI7不使用发送缓冲区 */
    
    /*
    ************************************************************************************
    *                          FUNCTION PROTOTYPES  函数原型
    ************************************************************************************
    */
    /************   硬件驱动    **************/
    #if(SCI_INIT_DYNAMIC == TRUE)  
         void SCI_Init(unsigned char port, unsigned long baudRate, unsigned long busClk,
                                            unsigned char databits,unsigned char parity); 
    #else
         void SCI_Init(unsigned char port);
    #endif  // of SCI_INIT_DYNAMIC == TRUE
    
    void SCI_EnableTxInt(unsigned char port);  
    void SCI_DisableTxInt(unsigned char port);    
    void SCI_EnableRxInt(unsigned char port);
    void SCI_DisableRxInt(unsigned char port);  
    void SCI_EnableRecv(unsigned char port);  
    void SCI_DisableRecv(unsigned char port);
    void SCI_EnableTrans(unsigned char port);  
    void SCI_DisableTrans(unsigned char port);
    
    void SCI_PutChar( unsigned char port, unsigned char c);  
    unsigned char SCI_GetChar(unsigned char port);  
    
    void SCI_PutShort (unsigned char port, short i);  
    void SCI_PutLong (unsigned char port, unsigned long i);
    
    /************   RTOS驱动    **************/
    
    void  SCI_BufferInit (void);
    
    INT8U  SCI_GetCharB (INT8U port, INT16U timeout, INT8U *err);
    
    INT8U SCI_PutCharB_Mutex (INT8U port, INT8U c, INT16U timeout);
    INT8U SCI_PutCharsB_Mutex (INT8U port, const INT8U *buf,INT16U length, INT16U timeout);
    #define SCI_PutStringB_Mutex(port,pStr,timeout) SCI_PutCharsB_Mutex(port,str,strlen(str),timeout)
    
    void  SCI_SendBuf_hold (INT8U port, INT16U timeout, INT8U *perr);
    INT8U SCI_PutCharB (INT8U port, INT8U c, INT16U timeout);
    INT8U SCI_PutCharsB(INT8U port, const INT8U *buf,INT16U length, INT16U timeout);
    #define SCI_PutStringB(port,pStr,timeout)    SCI_PutCharsB(port,str,strlen(str),timeout)
    void  SCI_SendBuf_release(INT8U port);
    
    INT8U SCI_RxBufferIsEmpty (INT8U port); 
    
    INT8U SCI_TxBufferIsFull (INT8U port);
    
    
    /*
    ************************************************************************************
    *                          ERROR CHECK 错误检查
    ************************************************************************************
    */
    
    #ifndef SCI_MODULE_ENABLE
       #error "SCI_MODULE_ENABLE must be defined."
    #endif
    
    #ifndef SCI_UCOS_MODULE_ENABLE
       #error "SCI_UCOS_MODULE_ENABLE must be defined."
    #endif
    
    
    #if(SCI_UCOS_MODULE_ENABLE == TRUE)
    
    #if(  SCI_RX_BUFFER_SIZE < 0 || SCI_RX_BUFFER_SIZE >= 65536 || SCI0_RX_BUFFER_SIZE < 0 || SCI0_RX_BUFFER_SIZE >= 65536 \
       || SCI1_RX_BUFFER_SIZE < 0 || SCI1_RX_BUFFER_SIZE >= 65536 || SCI2_RX_BUFFER_SIZE < 0 || SCI2_RX_BUFFER_SIZE >= 65536 \
       || SCI3_RX_BUFFER_SIZE < 0 || SCI3_RX_BUFFER_SIZE >= 65536 || SCI4_RX_BUFFER_SIZE < 0 || SCI4_RX_BUFFER_SIZE >= 65536 \
       || SCI5_RX_BUFFER_SIZE < 0 || SCI5_RX_BUFFER_SIZE >= 65536 || SCI6_RX_BUFFER_SIZE < 0 || SCI6_RX_BUFFER_SIZE >= 65536 \
       || SCI7_RX_BUFFER_SIZE < 0 || SCI7_RX_BUFFER_SIZE >= 65536)
       #error "SCI buffer size must between 0 and 65535"
    #endif 
    #if(  SCI_TX_BUFFER_SIZE < 0 || SCI_TX_BUFFER_SIZE >= 65536 || SCI0_TX_BUFFER_SIZE < 0 || SCI0_TX_BUFFER_SIZE >= 65536 \
       || SCI1_TX_BUFFER_SIZE < 0 || SCI1_TX_BUFFER_SIZE >= 65536 || SCI2_TX_BUFFER_SIZE < 0 || SCI2_TX_BUFFER_SIZE >= 65536 \
       || SCI3_TX_BUFFER_SIZE < 0 || SCI3_TX_BUFFER_SIZE >= 65536 || SCI4_TX_BUFFER_SIZE < 0 || SCI4_TX_BUFFER_SIZE >= 65536 \
       || SCI5_TX_BUFFER_SIZE < 0 || SCI5_TX_BUFFER_SIZE >= 65536 || SCI6_TX_BUFFER_SIZE < 0 || SCI6_TX_BUFFER_SIZE >= 65536 \
       || SCI7_TX_BUFFER_SIZE < 0 || SCI7_TX_BUFFER_SIZE >= 65536)
       #error "SCI buffer size must between 0 and 65535"
    #endif 
    
    #if(SCI0_UCOS_CODE_EN != TRUE)
      #undef SCI0_RX_BUFFER_SIZE
      #undef SCI0_TX_BUFFER_SIZE
      #define SCI0_RX_BUFFER_SIZE     0
      #define SCI0_TX_BUFFER_SIZE     0
    #endif
    #if(SCI1_UCOS_CODE_EN != TRUE)
      #undef SCI1_RX_BUFFER_SIZE
      #undef SCI1_TX_BUFFER_SIZE
      #define SCI1_RX_BUFFER_SIZE     0
      #define SCI1_TX_BUFFER_SIZE     0
    #endif
    #if(SCI2_UCOS_CODE_EN != TRUE)
      #undef SCI2_RX_BUFFER_SIZE
      #undef SCI2_TX_BUFFER_SIZE
      #define SCI2_RX_BUFFER_SIZE     0
      #define SCI2_TX_BUFFER_SIZE     0
    #endif
    #if(SCI3_UCOS_CODE_EN != TRUE)
      #undef SCI3_RX_BUFFER_SIZE
      #undef SCI3_TX_BUFFER_SIZE
      #define SCI3_RX_BUFFER_SIZE     0
      #define SCI3_TX_BUFFER_SIZE     0
    #endif
    #if(SCI4_UCOS_CODE_EN != TRUE)
      #undef SCI4_RX_BUFFER_SIZE
      #undef SCI4_TX_BUFFER_SIZE
      #define SCI4_RX_BUFFER_SIZE     0
      #define SCI4_TX_BUFFER_SIZE     0
    #endif
    #if(SCI5_UCOS_CODE_EN != TRUE)
      #undef SCI5_RX_BUFFER_SIZE
      #undef SCI5_TX_BUFFER_SIZE
      #define SCI5_RX_BUFFER_SIZE     0
      #define SCI5_TX_BUFFER_SIZE     0
    #endif
    #if(SCI6_UCOS_CODE_EN != TRUE)
      #undef SCI6_RX_BUFFER_SIZE
      #undef SCI6_TX_BUFFER_SIZE
      #define SCI6_RX_BUFFER_SIZE     0
      #define SCI6_TX_BUFFER_SIZE     0
    #endif
    #if(SCI7_UCOS_CODE_EN != TRUE)
      #undef SCI7_RX_BUFFER_SIZE
      #undef SCI7_TX_BUFFER_SIZE
      #define SCI7_RX_BUFFER_SIZE     0
      #define SCI7_TX_BUFFER_SIZE     0
    #endif
    #endif // of SCI_UCOS_MODULE_ENABLE == TRUE
    
    
    #endif  // of  SCI_DEF_H

这个.h文件中包含了硬件驱动与uCOS的驱动的定义。宏定义了SCI0-7(MC9S12XEP100有8个SCI口)，在剩下的程序中名为port的参数需要传的就是这个宏定义的名称。然后还定义了映射寄存器的数组以及对应的宏等，这样可以很方便的直接访问任意端口的寄存器。  
如果不想编译SCI相关代码，则把\#define SCI\_MODULE\_ENABLE 后面改为FALSE就行。如果不使用uCOS的驱动，则把SCI\_UCOS\_MODULE\_ENABLE 后面改为FALSE(这章只说硬件驱动部分，所以直接改为了FALSE)。SCI0\_CODE\_INCLUDE和SCI1\_CODE\_INCLUDE只用于基于uCOS的驱动代码。  
配置部分应该已经注释的很清楚了，就是一些裁剪代码的功能，其中SCI\_INIT\_DYNAMIC 这个宏决定了方法SCI\_Init()是要使用固定的值初始化端口还是使用可变的值(多很多输入参数)来初始化，这根据需求决定。还有个发送多字节时的字节序选择。  
而函数声明部分没有注释，因为注释都写在函数实现部分的前面了，以下是SCI硬件驱动模块.c文件。

/*
    *********************************************************************************************************
    *
    *
    *                    SCI(Serial Communication Interface) SUPPORT PACKAGE
    *                                         Freescale MC9S12XEP100
    *                               飞思卡尔   MC9S12XEP100  SCI支持包
    *
    * File : SCI.c
    * By   : Lin Shijun(http://blog.csdn.net/lin_strong)
    * Date : 2018/02/23
    * version: V2.2
    * History: 2017/04/24  V1.0   the prototype of SCI_uCOS,only support SCI0 and SCI1
    *          2017/10/27  V2.1   modify some #pragma statement
    *          2018/02/23  V2.2   a.optimize the struct referencing to the register
    *                             b.add argument check
    * NOTE(s): refer to Li Yuan's  (http://blog.csdn.net/liyuanbhu/article/details/7764851)
    *                    and 
    *                  uCOS-II's Code
    *********************************************************************************************************
    */
    
    /*
    *********************************************************************************************************
    *                                          INCLUDES
    *********************************************************************************************************
    */
    
    #include "SCI_def.h"
    #if(SCI_MODULE_ENABLE == TRUE)
    
    /*
    *********************************************************************************************************
    *                                LOCAL FUNCTION DECLARATION
    *********************************************************************************************************
    */
    
    #if(SCI_ARGUMENT_CHECK_EN == TRUE)
      #define argCheck(arg,ceil)           if((arg) >= (ceil)) return;
      #define argCheck2(arg,ceil,rVal)     if((arg) >= (ceil)) return (rVal);
    #else
      #define argCheck(arg,ceil)
      #define argCheck2(arg,ceil,rVal)
    #endif // of (SPI_ARGUMENT_CHECK_EN == TRUE)
    #define portCheck()       argCheck(port,SCI_CNT)
    #define portCheck2(rVal)  argCheck2(port,SCI_CNT,rVal)
    
    /*
    *********************************************************************************************************
    *                                 REGISTER VARIABLE DEFINITION
    *********************************************************************************************************
    */
    
    pSCISTR const Ptr_SCI[] = {(pSCISTR)&_SCI0BD,(pSCISTR)&_SCI1BD,(pSCISTR)&_SCI2BD,(pSCISTR)&_SCI3BD \
           ,(pSCISTR)&_SCI4BD,(pSCISTR)&_SCI5BD,(pSCISTR)&_SCI6BD,(pSCISTR)&_SCI7BD};
    
    /*
    *********************************************************************************************************
    *                                        SCI_Init()
    *
    * Description : Initialize SCI support hardware.  初始化SCI硬件
    *
    * Arguments   : port               SCI0-SCI7 the port to Initialize;       选择要初始化的端口;
    *                       baudRate       baudRate to set;                               要设置的波特率;
    *                       busClk           the current bus clock;                       当前的总线时钟频率;
    *                       databits          Data bits,  8 or 9;                         数据位,8 或9位;
    *                       parity             SCI_PARITY_NO for disable Parity,SCI_PARITY_EVEN for Even Parity, ...
    *                                              ... SCI_ODD_PARITY for Odd Parity;
    *                                             SCI_PARITY_NO禁用奇偶校验, SCI_PARITY_EVEN启用奇校验, ...
    *                                              ... SCI_ODD_PARITY启用偶校验;
    *Note(s):  1.this function is availible only when SCI_INIT_DYNAMIC == TRUE
    *               2. this will disable all function accosiated with transmit and receive.
    *                        使用这个函数会禁能对应SCI口的发送接收相关功能(发送(中断)使能,接收(中断)使能)
    *********************************************************************************************************
    */
    
    #if(SCI_INIT_DYNAMIC == TRUE)
         void SCI_Init(unsigned char port, unsigned long baudRate, unsigned long busClk,
                    unsigned char databits,unsigned char parity)
    {
         portCheck();
         // 用baudRate临时存储最终赋予BD寄存器的值
         baudRate = ( busClk >> 4) /baudRate;    // SCI0BD = BUS_CLOCK/16/BAUD
         baudRate &= 0x1FFF;
         // 用databits 临时存储最终赋予CR1寄存器的值
         databits =  (databits > 8 ) << 4;                                                // M
         if(parity > SCI_PARITY_NO) {                                               // PE = 1
              if(parity>SCI_PARITY_EVEN) {
                   databits |= 0x02;                                                            // PT = 0
              }else{
                   databits |= 0x03;                                                            // PT = 1
              }
         }
         SCICR2(port) = 0x00;
         SCIBD(port) = (word)baudRate;
         SCICR1(port) = databits;
    }
    #else
    /*
    *********************************************************************************************************
    *                                        SCI_Init()
    *
    * Description : Initialize SCI support hardware.  初始化SCI硬件
    *
    * Arguments   : port               SCI0-SCI7 the port to Initialize;       选择要初始化的端口;
    *
    *Note(s):  1.this function is availible only when SCI_INIT_DYNAMIC == FALSE;
    *               2.will use the SCI_BAUDRATE & SCI_BUSCLK & SCI_DATABIT & SCI_PARITY to Initialize SCI;
    *               3. this will disable all function accosiated with transmit and receive.
    *                        使用这个函数会禁能对应SCI口的发送接收相关功能(发送(中断)使能,接收(中断)使能)
    *********************************************************************************************************
    */
    void SCI_Init(unsigned char port){
      portCheck();
      SCICR2(port) = 0x00;
      SCIBD(port) = SCI_BUSCLK/16/SCI_BAUDRATE & 0x1FFF; 
      SCICR1(port) = 0x00
    #if(SCI_DATABIT >8) 
      |SCI0CR1_M_MASK
    #endif
    #if(SCI_PARITY == 0)
    
    #elif (SCI_PARITY > 1)
      |SCI0CR1_PE_MASK
    #else
      |SCI0CR1_PE_MASK|SCI0CR1_PT_MASK
    #endif
      ;
    }
    
    #endif
    
    
    /*
    *********************************************************************************************************
    *                                        SCI_EnableTxInt()
    *
    * Description : Enable Tx interrupt(Transmitter Interrupt Enable Bit)   使能传输中断
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    
    void SCI_EnableTxInt(unsigned char port){
      portCheck();
      SCICR2(port) |= SCI0CR2_TIE_MASK;
    }
    
     /*
    *********************************************************************************************************
    *                                        SCI_EnableRxInt()
    *
    * Description : Enable Rx interrupt(Receiver Interrupt Enable Bit)   使能接收中断
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    
    void SCI_EnableRxInt(unsigned char port){
      portCheck();
      SCICR2(port) |= SCI0CR2_RIE_MASK;
    }
     /*
    *********************************************************************************************************
    *                                        SCI_EnableRecv()
    *
    * Description : Enable SCI Receiver    使能接收
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    void SCI_EnableRecv(unsigned char port){
      portCheck();
      SCICR2(port) |= SCI0CR2_RE_MASK;
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_EnableTrans()
    *
    * Description : Enable SCI Transmitter    使能发送
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    void SCI_EnableTrans(unsigned char port){
      portCheck();
      SCICR2(port) |= SCI0CR2_TE_MASK;
    }
    
    
     /*
    *********************************************************************************************************
    *                                        SCI_DisableTxInt()
    *
    * Description : Disable The Tx interrupt  (Transmitter Interrupt Enable Bit)     禁能发送
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    
    void SCI_DisableTxInt(unsigned char port){
      portCheck();
      SCICR2(port) &= ~(byte)SCI0CR2_TIE_MASK;
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_DisableRxInt()
    *
    * Description : Disable The Rx interrupt  (Receiver Interrupt Enable Bit)     禁能接收中断
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    void SCI_DisableRxInt(unsigned char port) {
      portCheck();
      SCICR2(port) &= ~(byte)SCI0CR2_RIE_MASK;
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_DisableTrans()
    *
    * Description : Disable SCI Transmitter    禁能发送
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    void SCI_DisableTrans(unsigned char port) {
      portCheck();
      SCICR2(port) &= ~(byte)SCI0CR2_TE_MASK;
    }
    /*
    *********************************************************************************************************
    *                                        SCI_DisableRecv()
    *
    * Description : Disable SCI Receiver    禁能接收
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *
    * Note: 
    *********************************************************************************************************
    */
    void SCI_DisableRecv(unsigned char port) {
      portCheck();
      SCICR2(port) &= ~(byte)SCI0CR2_RE_MASK;
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_PutChar()
    *
    * Description : Transmit one char    发送一个字符/字节
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *                       c                    the char to transmit;                        要发送的字符;                   
    * Note:   1. this function will block until transmiter idle and transmit the char;
    *              这个函数会阻塞到发送器空闲，然后发送字符
    *             2. not implement bit 9
    *********************************************************************************************************
    */
    
    void SCI_PutChar( unsigned char port, unsigned char c) {
      portCheck();
      while((SCISR1(port) & SCI0SR1_TDRE_MASK) == 0);    // 等待发送寄存器为空
      SCIDRL(port) = c;
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_GetChar()
    *
    * Description : Receive one char    接收一个字符/字节
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    *                       
    * Return       : 0                 invalid port or the char received is 0.
    *                others            the char received;                             接收到的字符;          
    * Note:   1.this function will block until receiver get a char,and return the char;
    *              这个函数会阻塞到接收器寄存器满，然后返回字符
    *         2. not implement bit 9
    *********************************************************************************************************
    */
    
    unsigned char SCI_GetChar(unsigned char port){
      portCheck2(0);
      while((SCISR1(port) & SCI0SR1_RDRF_MASK) == 0);    // 等待接收寄存器满
      return SCIDRL(port);
    }
    
    /*
    *********************************************************************************************************
    *                                        SCI_PutShort()
    *
    * Description : Transmit one short int.    发送一个短整型
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    * 
    * Return       :                        the char received;                             接收到的字符;          
    * Note:   1. this function will block until transmiter idle and transmit the char;
    *              这个函数会阻塞到发送器空闲，然后发送字符
    *********************************************************************************************************
    */
    
    void SCI_PutShort (unsigned char port, short i)  
    {
      char * p = (char *)&i;
      portCheck();
    #if(SCI_SEND_ENDIANNESS == SCI_ENDIAN_BIG)
      SCI_PutChar( port, p[0]);  
      SCI_PutChar( port, p[1]);  
    #endif
    #if(SCI_SEND_ENDIANNESS == SCI_ENDIAN_LITTLE)
      SCI_PutChar( port, p[1]);  
      SCI_PutChar( port, p[0]);  
    #endif
    }
    /*
    *********************************************************************************************************
    *                                        SCI_PutLong()
    *
    * Description : Transmit one long int.    发送一个长整型
    *
    * Arguments   : port               SCI0-SCI7 the port to Choose;       选择端口;
    * 
    * Return       :                        the char received;                             接收到的字符;          
    * Note:   1. this function will block until transmiter idle and transmit the char;
    *              这个函数会阻塞到发送器空闲，然后发送字符
    *********************************************************************************************************
    */
    void SCI_PutLong (unsigned char port, unsigned long i){
      char * p = (char *)&i;  
      portCheck();
    #if(SCI_SEND_ENDIANNESS == SCI_ENDIAN_BIG)
        SCI_PutChar( port, p[0]);  
        SCI_PutChar( port, p[1]);  
        SCI_PutChar( port, p[2]);  
        SCI_PutChar( port, p[3]);  
    #endif
    #if(SCI_SEND_ENDIANNESS == SCI_ENDIAN_LITTLE)
        SCI_PutChar( port, p[3]);  
        SCI_PutChar( port, p[2]);  
        SCI_PutChar( port, p[1]);  
        SCI_PutChar( port, p[0]);  
    #endif
    }
    
    #endif  // of SCI_MODULE_ENABLE == TRUE

硬件驱动并没有完整实现SCI模块的全部功能，比如目前实际上数据位只能是8位，因为发送和接收函数都不支持第9位；而且那些LOOPS，等待模式之类的也没有封装，主要是因为目前用不到。  
硬件驱动实现了所有8个SCI口的驱动。然后是示例：

#include <hidef.h>      /* common defines and macros */
    #include "derivative.h"      /* derivative-specific definitions */
    #include "SCI_def.h"
    
    #define  BUS_CLOCK         32000000    //总线频率
    #define  OSC_CLOCK         16000000    //晶振频率
    
    /*************************************************************/
    /*                      初始化锁相环                         */
    /*************************************************************/
    void INIT_PLL(void) 
    {
        CLKSEL &= 0x7f;       //设置OSCCLK作为系统时钟
        PLLCTL &= 0x8F;       //禁止锁相环
    
        #if(BUS_CLOCK == 32000000)
          SYNR = 0x43;     
       #endif 
    
        REFDV = 0x81;
        PLLCTL |=0x70;  //使能锁相环
        asm NOP;
        asm NOP;
        while(!(CRGFLG&0x08)); //PLLCLK锁定
        CLKSEL |= 0x80;        //设置PLLCLK为系统时钟
    }
    
    void main(void) {
        unsigned char c;
        // 设置总线频率为32MHz
        DisableInterrupts;
        INIT_PLL();
        EnableInterrupts;
        SCI_Init(SCI0,9600,BUS_CLOCK,8,SCI_PARITY_NO);
        SCI_EnableRecv(SCI0);  
        SCI_EnableTrans(SCI0);  
        // 每接收一个字符就返回0x33和那个字符
        for(;;) {
            c = SCI_GetChar(SCI0);
            SCI_PutShort(SCI0,c | 0x3300);
         } 
    }

![通信测试][SouthEast]

然后下一章来讲基于uCOS的SCI驱动。

--------------------

更改历史：

2017/10/29 更新到 V2.1  
2018/02/24 更新到 V2.2 例行优化

[http_blog.csdn.net_liyuanbhu_article_details_7764851]: http://blog.csdn.net/liyuanbhu/article/details/7764851
[SouthEast]: /images/20220613/5c34a213fabc4688b840ed7798d1b5f0.png