nginx基于端口和ip配置

旧城等待， 2022-07-13 23:44 698阅读 0赞

1、基于端口  
\[root@nginx conf\]\# cat nginx.conf    
error\_log  logs/error.log error;  
worker\_processes  2;  
events \{  
    worker\_connections  1024;  
\}  
  
  
http \{  
    include       mime.types;  
    default\_type  application/octet-stream;  
    sendfile        on;  
    keepalive\_timeout  65;  
    log\_format  main  '$remote\_addr - $remote\_user \[$time\_local\] "$request" '  
                      '$status $body\_bytes\_sent "$http\_referer" '  
                      '"$http\_user\_agent" "$http\_x\_forwarded\_for"';      
  
  
        server \{  
        listen       8000;  
        server\_name  www.wolf.com;  
        location / \{  
            root   html/www;  
            index  index.html index.htm;  
            access\_log logs/www\_access.log main;  
        \}  
    \}  
        server \{  
        listen       8001;  
        server\_name  bbs.wolf.com;  
        location / \{  
            root   html/bbs;  
            index  index.html index.htm;  
            access\_log logs/bbs\_access.log;  
        \}  
    \}  
        server \{  
        listen       8002;  
        server\_name  blog.wolf.com;  
        location / \{  
            root   html/blog;  
            index  index.html index.htm;  
            access\_log logs/blog\_access.log;  
        \}  
    \}  
  
  
\#\#status  
   server \{  
        listen       8004;  
        server\_name  status.wolf.com;  
        location / \{  
            stub\_status on;  
            access\_log off;  
        \}  
    \}  
\}  
\[root@nginx conf\]\# ../sbin/nginx -t  
nginx: the configuration file /data/nginx1.8.1/conf/nginx.conf syntax is ok  
nginx: configuration file /data/nginx1.8.1/conf/nginx.conf test is successful  
\[root@nginx conf\]\# ../sbin/nginx -s reload  
测试  
ie或者curl  
  
  
2、基于ip地址   
手动添加ip  
\[root@nginx conf\]\# ifconfig eth0:0 192.168.3.60/24 up    
\[root@nginx conf\]\# ifconfig eth0:1 192.168.3.61/24 up    
\[root@nginx conf\]\# ifconfig -a  
eth0      Link encap:Ethernet  HWaddr 00:0C:29:12:99:D4    
          inet addr:192.168.3.49  Bcast:192.168.3.255  Mask:255.255.255.0  
          inet6 addr: fe80::20c:29ff:fe12:99d4/64 Scope:Link  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1  
          RX packets:792652 errors:0 dropped:0 overruns:0 frame:0  
          TX packets:460481 errors:0 dropped:0 overruns:0 carrier:0  
          collisions:0 txqueuelen:1000   
          RX bytes:972250327 (927.2 MiB)  TX bytes:92493014 (88.2 MiB)  
  
  
eth0:0    Link encap:Ethernet  HWaddr 00:0C:29:12:99:D4    
          inet addr:192.168.3.60  Bcast:192.168.3.255  Mask:255.255.255.0  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1  
  
  
eth0:1    Link encap:Ethernet  HWaddr 00:0C:29:12:99:D4    
          inet addr:192.168.3.61  Bcast:192.168.3.255  Mask:255.255.255.0  
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1  
  
  
lo        Link encap:Local Loopback    
          inet addr:127.0.0.1  Mask:255.0.0.0  
          inet6 addr: ::1/128 Scope:Host  
          UP LOOPBACK RUNNING  MTU:16436  Metric:1  
          RX packets:58 errors:0 dropped:0 overruns:0 frame:0  
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0  
          collisions:0 txqueuelen:0   
          RX bytes:4962 (4.8 KiB)  TX bytes:4962 (4.8 KiB)  
  
  
pan0      Link encap:Ethernet  HWaddr A2:25:DF:9D:1A:0F    
          BROADCAST MULTICAST  MTU:1500  Metric:1  
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0  
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0  
          collisions:0 txqueuelen:0   
          RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)  
配置文件修改  
\[root@nginx conf\]\# cat nginx.conf    
  
  
error\_log  logs/error.log error;  
worker\_processes  2;  
  
  
events \{  
    worker\_connections  1024;  
\}  
  
  
http \{  
    include       mime.types;  
    default\_type  application/octet-stream;  
    sendfile        on;  
    keepalive\_timeout  65;  
    log\_format  main  '$remote\_addr - $remote\_user \[$time\_local\] "$request" '  
                      '$status $body\_bytes\_sent "$http\_referer" '  
                      '"$http\_user\_agent" "$http\_x\_forwarded\_for"';      
  
  
        server \{  
        listen       192.168.3.49:80;  
        server\_name  www.wolf.com;  
        location / \{  
            root   html/www;  
            index  index.html index.htm;  
            access\_log logs/www\_access.log main;  
        \}  
    \}  
        server \{  
        listen       192.168.3.60:80;  
        server\_name  bbs.wolf.com;  
        location / \{  
            root   html/bbs;  
            index  index.html index.htm;  
            access\_log logs/bbs\_access.log;  
        \}  
    \}  
        server \{  
        listen       192.168.3.61:80;  
        server\_name  blog.wolf.com;  
        location / \{  
            root   html/blog;  
            index  index.html index.htm;  
            access\_log logs/blog\_access.log;  
        \}  
    \}  
  
  
\#\#status  
   server \{  
        listen       8004;  
        server\_name  status.wolf.com;  
        location / \{  
            stub\_status on;  
            access\_log off;  
        \}  
    \}  
\}  
\[root@nginx conf\]\# ../sbin/nginx -t  
nginx: the configuration file /data/nginx1.8.1/conf/nginx.conf syntax is ok  
nginx: configuration file /data/nginx1.8.1/conf/nginx.conf test is successful  
\[root@nginx conf\]\# ../sbin/nginx -s reload  
测试  
ie或者curl