Power下，Ubuntu代替PowerKVM作为KVM hypervisor

蔚落 2022-07-28 06:16 147阅读 0赞

# Using Ubuntu 14.04 as a KVM hypervisor for POWER #

Although not officially supported, it is  possible to run Ubuntu 14.04.2 LTS as a KVM hypervisor in POWER architecture. You can officially support Ubuntu as hypervisor starting at Ubuntu 14.10 and optimally at 15.04.

In order to do that, you need to be on 14.04.2 or later. Ubuntu KVM doesn't run on 3.13 kernel, which is part of original Ubuntu 14.04 and 14.04.1 release. You will also need to download some newer packages from the [Cloud Archive repository][].

## What is the difference between the PowerKVM and using Ubuntu as hypervisor ##

There is a set of differences, mainly some features that were not made upstream yet, as:

*  Huge DDW for the guests (Enabled in PowerKVM and not on Ubuntu yet)
    
     *  Status: Some folks working to enable Huge DDW exploitation in Linux kernel and Qemu, which will make it available in Ubuntu (possible version 15.10)
 *  Ubuntu runs the hypervisor in Little endian mode. On the other side, PowerKVM, as in 2.1.1, is still a BE hypervisor.
 *  PowerKVM has some additional software not yet available in Ubuntu, as Kimchi and Ginger. (To be available in version Ubuntu 15.10)
 *  In terms of packages available in the hypervisor,  Ubuntu is a full-fledged hypervisor, while PowerKVM is a more restricted hypervisor.
 *  PowerKVM is based on RPM and YUM packaging, while  Ubuntu is based in DEB and APT.

## How to use Ubuntu as a hypervisor? ##

*  **Note** Recommended 14.10 or later

Ubuntu is able to be used as a hypervisor, as an alternative to PowerKVM.

Just install buntun in bare metal (NV) following the steps in Running Ubuntu non-virtualized on POWER8.

After the installation you need:

1. Install the missing virtualization packages:
 
 \# sudo apt-get install qemu-user qemu-utils cloud-image-utils qemu-system-ppc qemu-slof libvirt-bin numactl 
 
 
 ## `root@zhai:~# lscpu Architecture:          ppc64le Byte Order:            Little Endian CPU(s):                80 On-line CPU(s) list:   0,8,16,24,32,40,48,56,64,72 Off-line CPU(s) list:  1-7,9-15,17-23,25-31,33-39,41-47,49-55,57-63,65-71,73-79 Thread(s) per core:    1 Core(s) per socket:    10 Socket(s):             1 NUMA node(s):          1 Model:                 TN71-BP012 L1d cache:             64K L1i cache:             32K L2 cache:              512K L3 cache:              8192K NUMA node0 CPU(s):     0,8,16,24,32,40,48,56,64,72 root@zhai:~# apt-get install qemu-user qemu-utils qemu-system-ppc qemu-slof libvirt-bin numactl qemu-kvm Reading package lists... Done Building dependency tree Reading state information... Done qemu-slof is already the newest version. numactl is already the newest version. The following extra packages will be installed: binfmt-support ipxe-qemu libjpeg-turbo8 libjpeg8 libvirt0 qemu-block-extra qemu-system-common qemu-user-binfmt seabios Suggested packages: policykit-1 radvd lvm2 samba vde2 openbios-ppc openhackware debootstrap Recommended packages: dmidecode The following packages will be REMOVED: qemu-keymaps The following NEW packages will be installed: binfmt-support ipxe-qemu libjpeg-turbo8 libjpeg8 qemu-block-extra qemu-user-binfmt seabios The following packages will be upgraded: libvirt-bin libvirt0 qemu-kvm qemu-system-common qemu-system-ppc qemu-user qemu-utils 7 upgraded, 7 newly installed, 1 to remove and 91 not upgraded. Need to get 11.4 MB of archives. After this operation, 16.5 MB of additional disk space will be used. Do you want to continue? [Y/n] y` Software Required versions ##
 
 Once you do that, you should have the following package versions:
 
 <table style="border-collapse:collapse; padding:12px!important; margin-left:20px!important; width:698px"> 
 <tbody> 
 <tr> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> Package </td> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> Version </td> 
 </tr> 
 <tr> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> qemu </td> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> 1:2.2+dfsg-5expubuntu9~cloud0 </td> 
 </tr> 
 <tr> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> qemu-slof </td> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> 20140630+dfsg-1ubuntu1 </td> 
 </tr> 
 <tr> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> libvirt </td> 
 <td style="padding:0px 8px; border:1px dotted rgb(174,167,159)"> 1.2.12-0ubuntu12~cloud0 </td> 
 </tr> 
 </tbody> 
 </table>
 
 root@zhai:~# qemu-system-ppc --version
 QEMU emulator version 2.3.0 (Debian 1:2.3+dfsg-5ubuntu9.2~cloud0), Copyright (c) 2003-2008 Fabrice Bellard
 root@zhai:~# libvirtd --version
 libvirtd (libvirt) 1.2.16
 root@zhai:~# dpkg -l | grep qemu-slof
 ii qemu-slof 20140630+dfsg-1ubuntu1~14.04 all Slimline Open Firmware -- QEversion
 
 Once you have that, you have all the software need to run a KVM guest on your machine. 
 
2. Add the users that would be able to run virtual machines into the kvm group:
 
 \# sudo usermod -a -G kvm <user>
3. Disable the SMT:
 
 \# sudo ppc64\_cpu --smt=off
4. Enable KVM module in the kernel (Add a line "kvm\_hv" in /etc/modules in order to automatically load it after a reboot):
 
 \# sudo modprobe kvm\_hv 
 KVM是Linux的一个模块。可以用modprobe去加载KVM模块。加载了模块后，才能进一步通过其他工具创建虚拟机。但仅有KVM模块是 远远不够的，因为用户无法直接控制内核模块去作事情：还必须有一个用户空间的工具才行。这个用户空间的工具，开发者选择了已经成型的开源虚拟化软件 QEMU。说起来QEMU也是一个虚拟化软件。它的特点是可虚拟不同的CPU。 
 
5. **\[Ubuntu 14.10 only\]** Assure that you have the /usr/bin/qemu-system-ppc64le file, otherwise, create a link as follow. This is only required in Ubuntu 14.10 and this is already 'fixed' on later releases, check \[1\]:
 
 \# sudo ln -s qemu-system-ppc64 /usr/bin/qemu-system-ppc64le
6. **\[Ubuntu 14.10 only\]** Allow apparmor to access the SLOF (firmware). This is only required in Ubuntu 14.10 and this is already 'fixed' on later releases, check\[2\]:
 
 \# echo "/usr/share/slof/\*\* r," >> /etc/apparmor.d/abstractions/libvirt-qemu
7. If you hit "failed to parse default acl file \`/etc/qemu/bridge.conf", you need to edit (or create) file /etc/qemu/bridge.conf and add:
 
 allow br0
8. If you hit "failed to create tun device: Operation not permitted", you need to set the setuid attribute:
 
 \# chmod u+s /usr/lib/qemu/qemu-bridge-helper

# ps -ef | grep virt
    /usr/sbin/libvirtd -d

# virsh list --all

参考：

1 ubuntu ppc64el: https://wiki.ubuntu.com/ppc64el/

2 https://wiki.ubuntu.com/ppc64el/CommonQuestions

3 https://wiki.ubuntu.com/ppc64el/KVM1404

4 PowerKVM: http://blog.csdn.net/zhaihaifei/article/details/51025780

[Cloud Archive repository]: https://wiki.ubuntu.com/%5Bhttps%3A//wiki.ubuntu.com/ServerTeam/CloudArchive