lamp网站部署

分手后的思念是犯贱 2022-08-06 01:14 287阅读 0赞

应公司要求在 Vsphere client部署备用网站，以便备用，不要问为什么有虚拟化任性。

环境centos6.5 直接用yum安装环境，新机器做下初始话一个脚本公司同事写的：

\#!/bin/bash  
\# Program:  
\#       system\_init\_shell  
\# History:  
\# Release:  
\#       1.1  
cat << EOF  
 +--------------------------------------------------------------+  
 |          === Welcome toCentOS6.x System init ===           |  
 +--------------------------------------------------------------+  
 +---------------------------by opsren--------------------------+  
EOF

\#update system pack  
yum -y install gcc gcc-c++ make autoconf libtool-ltdl-devel gd-devel freetype-devel libxml2-devel libjpeg-devel libpng-devel openssl-devel curl-devel bison patch unzip libmcrypt-devel libmhash-devel ncurses-devel sudo bzip2 mlocate flex lrzsz sysstat lsof setuptool  system-config-network-tui system-config-firewall-tui ntp libaio-devel wget ntp iotop tcpdump openssh-clients vim telnet curl logwatch net-snmp

yum update -y  
\#set clock  
cp -f /usr/share/zoneinfo/Asia/Shanghai /etc/localtime  
\#set ntp  
cp -f /etc/ntp.conf /etc/ntp.bak  
sed -i '10s/^.\*$/restrict default ignore/' /etc/ntp.conf  
service ntpd restart  
chkconfig --level 234 ntpd on  
\#set ulimit  
echo "ulimit -SHn 102400" >> /etc/rc.local  
cat > /etc/security/limits.conf << EOF

\* hard nofile 65536  
\* soft nofile 4089  
\* hard nproc 16384  
\* soft nproc 10240  
\* hard rss 100000  
EOF  
\#set max user processes  
sed -i 's/1024/102400/' /etc/security/limits.d/90-nproc.conf

\# turnoff the control-alt-delete  
sed -i 's\#exec /sbin/shutdown -r now\#\\\#exec /sbin/shutdown -r now\#' /etc/init/control-alt-delete.conf

\#set LANG  
:> /etc/sysconfig/i18n  
cat >> /etc/sysconfig/i18n << EOF  
 LANG="en\_US.UTF-8"  
EOF

\#set ssh  
sed -i 's/^GSSAPIAuthentication yes$/GSSAPIAuthentication no/' /etc/ssh/sshd\_config  
sed -i 's/\#UseDNS yes/UseDNS no/' /etc/ssh/sshd\_config  
\#sed -i 's/\#Port 22/Port 6343/' /etc/ssh/sshd\_config  
service sshd restart

\#set sysctl  
true > /etc/sysctl.conf  
cat >> /etc/sysctl.conf << EOF

fs.aio-max-nr = 1048576

fs.file-max = 6815744

net.ipv4.ip\_forward = 0  
 net.ipv4.conf.default.rp\_filter = 1  
 net.ipv4.conf.default.accept\_source\_route = 0  
 kernel.sysrq = 0  
 kernel.core\_uses\_pid = 1  
 net.ipv4.tcp\_syncookies = 1  
 kernel.msgmnb = 65536  
 kernel.msgmax = 65536  
 kernel.shmmax = 68719476736  
 kernel.shmall = 4294967296

kernel.shmmni = 4096

kernel.sem = 250 32000 100 128  
 net.ipv4.tcp\_max\_tw\_buckets = 6000  
 net.ipv4.tcp\_sack = 1  
 net.ipv4.tcp\_window\_scaling = 1  
 net.ipv4.tcp\_rmem = 4096 87380 4194304  
 net.ipv4.tcp\_wmem = 4096 16384 4194304  
 net.core.wmem\_default = 262144  
 net.core.rmem\_default = 262144  
 net.core.rmem\_max = 4194304  
 net.core.wmem\_max = 1048576  
 net.core.netdev\_max\_backlog = 262144  
 net.core.somaxconn = 262144  
 net.ipv4.tcp\_max\_orphans = 3276800  
 net.ipv4.tcp\_max\_syn\_backlog = 262144  
 net.ipv4.tcp\_timestamps = 0  
 net.ipv4.tcp\_synack\_retries = 1  
 net.ipv4.tcp\_syn\_retries = 1  
 net.ipv4.tcp\_tw\_recycle = 1  
 net.ipv4.tcp\_tw\_reuse = 1  
 net.ipv4.tcp\_mem = 94500000 915000000 927000000  
 net.ipv4.tcp\_fin\_timeout = 1  
 net.ipv4.tcp\_keepalive\_time = 1200  
 net.ipv4.ip\_local\_port\_range = 9000 65500  
EOF  
/sbin/sysctl -p  
echo "sysctl set OK!!"

\#disable ipv6  
/sbin/chkconfig ip6tables off  
echo "ipv6 is disabled!"  
\#flush iptable  
/sbin/iptables -F  
/sbin/iptables-save > /etc/sysconfig/iptables  
\#disable selinux  
sed -i '/SELINUX/s/enforcing/disabled/' /etc/selinux/config  
setenforce 0

\#vim setting

sed -i "8 s/^/alias vi='vim'/" /root/.bashrc  
echo 'syntax on' > /root/.vimrc

cat << EOF  
 +--------------------------------------------------------------+  
 |                    ===System init over===                    |  
 +--------------------------------------------------------------+  
 +---------------------------by jinong--------------------------+  
EOF  
echo "\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#"

\#关于脚本的解释说明：  
\#4.更新系统的基础软件  
\#5.设置系统时钟同步  
\#6.其中第一条语句是设定硬件时钟，第二条语句是设定系统时钟和硬件时钟同步  
\#7.增加打开最大文件描述符  
\#8.增加系统进程数（线程）的限制-->max user processes  
\#centos 5与centos 6不同的是，只要在/etc/security/limits.conf 设置了root soft nofile 102400 和root hard nofile102400，对应的uilmit -u 后的结果就会是102400，这里需要注意区别！  
\#9.关闭control-alt-delete  
\#10.设置系统语系  
\#11.设置SSH  
\#12.设置系统内核参数  
\#13.关闭IPV6  
\#14.关闭iptables  
\#15.关闭selinux  
\#16.vi相关设置

yum 更新一下包建立缓存

yum update

yum  makecache

安装lamp环境开始

安装apache  
\[root@lamp ~\]\# yum -y install httpd

开机启动  
\[root@lamp ~\]\# chkconfig httpd on  
开启服务  
\[root@lamp ~\]\# service httpd start

安装一些扩展  
\[root@lamp ~\]\# yum install -y httpd-manual mod\_ssl mod\_perl mod\_auth\_mysql

查看下端口是否启动  
\[root@lamp ~\]\# netstat -lnpt  
在浏览器访问  
http://ip地址

安装mysql数据库  
客户端服务端开发库  
\[root@lamp ~\]\# yum install mysql mysql-server mysql-devel -y  
开机启动

\[root@lamp ~\]\# chkconfig mysqld on

开启mysql服务  
\[root@lamp ~\]\# service mysqld start

看mysql运行端口  
\[root@lamp ~\]\# netstat -nlpt |grep mysql