BCM4352 linux 驱动安装

小灰灰 2022-08-12 00:19 345阅读 0赞

1.查找网卡设备： lshw -numeric -class network

cloud@ubuntu1404-xpz:~$ sudo lshw -numeric -class network  
\[sudo\] password for cloud:  
\*-network  
description: Ethernet interface  
product: Ethernet Connection I217-LM \[8086:153A\]  
vendor: Intel Corporation \[8086\]  
physical id: 19  
bus info: pci@0000:00:19.0  
logical name: em1  
version: 04  
serial: ec:f4:bb:45:f5:6c  
size: 100Mbit/s  
capacity: 1Gbit/s  
width: 32 bits  
clock: 33MHz  
capabilities: pm msi bus\_master cap\_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation  
configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=2.3.2-k duplex=full firmware=0.13-3 ip=192.168.1.109 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s  
resources: irq:44 memory:f7f00000-f7f1ffff memory:f7f3d000-f7f3dfff ioport:f080(size=32)  
\*-network UNCLAIMED  
description: Network controller  
product: BCM4352 802.11ac Wireless Network Adapter \[14E4:43B1\]  
vendor: Broadcom Corporation \[14E4\]  
physical id: 0  
bus info: pci@0000:03:00.0  
version: 03  
width: 64 bits  
clock: 33MHz  
capabilities: pm msi pciexpress bus\_master cap\_list  
configuration: latency=0  
resources: memory:f5e00000-f5e07fff memory:f5c00000-f5dfffff

2.驱动下载地址：[http://www.broadcom.com/support/802.11/linux\_sta.php][http_www.broadcom.com_support_802.11_linux_sta.php]

3.如若要编译无线网卡驱动，使其成为内核的一个模块，要有相应的工具（kerneldeveloper），当没有相应的工具时候，编译驱动将会产生如下错误：

make:\*\*\* /lib/modules/”release”/build: No such file or directory.Stop.

我的系统是ubuntu，安装kerneldeveloper的方法是：

apt-get install build-essential linux-headers-generic

apt-get build-dep linux

其实在ubuntu中，kerneldeveloper是已经安装好的。

4.解压驱动程序包，进入解压目录，

编译操作：

\#make clean（可选）

\#make

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ sudo make  
KBUILD\_NOPEDANTIC=1 make -C /lib/modules/\`uname -r\`/build M=\`pwd\`  
make\[1\]: 正在进入目录 \`/usr/src/linux-headers-3.13.0-45-generic'  
CFG80211 API is prefered for this kernel version  
Using CFG80211 API  
LD /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/built-in.o  
CC \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/src/shared/linux\_osl.o  
CC \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/src/wl/sys/wl\_linux.o  
CC \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/src/wl/sys/wl\_iw.o  
CC \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/src/wl/sys/wl\_cfg80211\_hybrid.o  
LD \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/wl.o  
Building modules, stage 2.  
CFG80211 API is prefered for this kernel version  
Using CFG80211 API  
MODPOST 1 modules  
WARNING: modpost: missing MODULE\_LICENSE() in /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/wl.o  
see include/linux/module.h for more information  
WARNING: modpost: Found 1 section mismatch(es).  
To see full details build your kernel with:  
'make CONFIG\_DEBUG\_SECTION\_MISMATCH=y'  
CC /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/wl.mod.o  
LD \[M\] /home/xiepeizhao/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248/wl.ko  
make\[1\]:正在离开目录 \`/usr/src/linux-headers-3.13.0-45-generic'  
  
成功之后将会生成wl.ko文件。

5.查找冲突模块并卸载屏蔽冲突模块，具体操作命令如下：

\#查找冲突模块

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ lsmod| grep "b43\\|wl\\|ssb\\|bcma"

b43 296610 0

mac80211 257001 1 b43

cfg80211 156212 2 b43,mac80211

ssb 45942 1 b43

\#卸载冲突模块

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ sudo rmmod b43

\[sudo\]password for administrator:

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ sudo rmmod ssb

\#屏蔽冲突模块，阻止其在启动时被加载

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ sudo echo "blacklist b43">>/etc/modprobe.d/blacklist.conf

bash:/etc/modprobe.d/blacklist.conf:权限不够

cloud@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248$ sudo su

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# echo "blacklist b43">>/etc/modprobe.d/blacklist.conf

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# echo "blacklist ssb">>/etc/modprobe.d/blacklist.conf

注：最后几步操作不一定要在root模式下

6.将无线模块加入内核中

如果之前没有安装过无线驱动，需要加载安全模块

\#加载安全模块

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\#modprobe lib80211

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# modprobe cfg80211

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# insmod wl.ko

注：该步操作不一定要在root模式下，通过tab键可以讲命令补充完整（如果在正确的模式下）

7.让无线模块开机自启动

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# cp wl.ko /lib/modules/\`uname -r\`/kernel/drivers/net/wireless/

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# sudo depmod -a

8.当出现如下信息时，表明已安装成功。此时，就可以搜寻到无线网络

root@ubuntu1404-xpz:~/Downloads/hybrid-v35\_64-nodebug-pcoem-6\_30\_223\_248\# lsmod | grep "b43\\|wl\\|ssb\\|bcma"

wl 2465136 0

cfg80211 156212 1 wl

lib80211 14570 2 lib80211\_crypt\_tkip,wl

[http_www.broadcom.com_support_802.11_linux_sta.php]: http://www.broadcom.com/support/802.11/linux_sta.php

BCM4352 linux 驱动安装

发表评论取消回复

还没有评论，来说两句吧...

相关阅读

相关 HDU 4352

相关联想打印机 linux驱动怎么安装步骤,如何在MAC系统下安装打印机驱动

相关东芝笔记本linux系统安装驱动,笔记本驱动,详细教您东芝笔记本无线网卡驱动怎么安装...

相关 Selenium Chrome驱动安装(linux系统)

相关 linux安装rtl8812au驱动

相关 BCM4352 linux 驱动安装

相关 Ubuntu11.04下BCM4311无线网卡驱动安装

相关 CentOS 6.5 BCM43142 80211无线网卡驱动安装

相关 ubuntu wifi bcm4322 安装驱动

相关 BCM7xxx