配置好的Doxygen配置文件

谁践踏了优雅 2022-08-12 01:06 300阅读 0赞

# Doxyfile 1.8.7
    
    # This file describes the settings to be used by the documentation system
    # doxygen (www.doxygen.org) for a project.
    #
    # All text after a double hash (##) is considered a comment and is placed in
    # front of the TAG it is preceding.
    #
    # All text after a single hash (#) is considered a comment and will be ignored.
    # The format is:
    # TAG = value [value, ...]
    # For lists, items can also be appended using:
    # TAG += value [value, ...]
    # Values that contain spaces should be placed between quotes (\" \").
    
    #---------------------------------------------------------------------------
    # Project related configuration options
    #---------------------------------------------------------------------------
    
    # This tag specifies the encoding used for all characters in the config file
    # that follow. The default is UTF-8 which is also the encoding used for all text
    # before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
    # built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
    # for the list of possible encodings.
    # The default value is: UTF-8.
    
    DOXYFILE_ENCODING      = UTF-8
    
    # The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
    # double-quotes, unless you are using Doxywizard) that should identify the
    # project for which the documentation is generated. This name is used in the
    # title of most generated pages and in a few other places.
    # The default value is: My Project.
    
    PROJECT_NAME           = ZLL
    
    # The PROJECT_NUMBER tag can be used to enter a project or revision number. This
    # could be handy for archiving the generated documentation or if some version
    # control system is used.
    
    PROJECT_NUMBER         = V1.0
    
    # Using the PROJECT_BRIEF tag one can provide an optional one line description
    # for a project that appears at the top of each page and should give viewer a
    # quick idea about the purpose of the project. Keep the description short.
    
    PROJECT_BRIEF          = 
    
    # With the PROJECT_LOGO tag one can specify an logo or icon that is included in
    # the documentation. The maximum height of the logo should not exceed 55 pixels
    # and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
    # to the output directory.
    
    PROJECT_LOGO           = 
    
    # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
    # into which the generated documentation will be written. If a relative path is
    # entered, it will be relative to the location where doxygen was started. If
    # left blank the current directory will be used.
    
    OUTPUT_DIRECTORY       = G:\Work\Doc\ZLL
    
    # If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
    # directories (in 2 levels) under the output directory of each output format and
    # will distribute the generated files over these directories. Enabling this
    # option can be useful when feeding doxygen a huge amount of source files, where
    # putting all generated files in the same directory would otherwise causes
    # performance problems for the file system.
    # The default value is: NO.
    
    CREATE_SUBDIRS         = NO
    
    # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
    # characters to appear in the names of generated files. If set to NO, non-ASCII
    # characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
    # U+3044.
    # The default value is: NO.
    
    ALLOW_UNICODE_NAMES    = NO
    
    # The OUTPUT_LANGUAGE tag is used to specify the language in which all
    # documentation generated by doxygen is written. Doxygen will use this
    # information to generate all constant output in the proper language.
    # Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
    # Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
    # Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
    # Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
    # Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
    # Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
    # Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
    # Ukrainian and Vietnamese.
    # The default value is: English.
    
    OUTPUT_LANGUAGE        = Chinese
    
    # If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
    # descriptions after the members that are listed in the file and class
    # documentation (similar to Javadoc). Set to NO to disable this.
    # The default value is: YES.
    
    BRIEF_MEMBER_DESC      = YES
    
    # If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
    # description of a member or function before the detailed description
    #
    # Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
    # brief descriptions will be completely suppressed.
    # The default value is: YES.
    
    REPEAT_BRIEF           = YES
    
    # This tag implements a quasi-intelligent brief description abbreviator that is
    # used to form the text in various listings. Each string in this list, if found
    # as the leading text of the brief description, will be stripped from the text
    # and the result, after processing the whole list, is used as the annotated
    # text. Otherwise, the brief description is used as-is. If left blank, the
    # following values are used ($name is automatically replaced with the name of
    # the entity):The $name class, The $name widget, The $name file, is, provides,
    # specifies, contains, represents, a, an and the.
    
    ABBREVIATE_BRIEF       = "The $name class" \
                             "The $name widget" \
                             "The $name file" \
                             is \
                             provides \
                             specifies \
                             contains \
                             represents \
                             a \
                             an \
                             the
    
    # If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
    # doxygen will generate a detailed section even if there is only a brief
    # description.
    # The default value is: NO.
    
    ALWAYS_DETAILED_SEC    = NO
    
    # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
    # inherited members of a class in the documentation of that class as if those
    # members were ordinary class members. Constructors, destructors and assignment
    # operators of the base classes will not be shown.
    # The default value is: NO.
    
    INLINE_INHERITED_MEMB  = NO
    
    # If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
    # before files name in the file list and in the header files. If set to NO the
    # shortest path that makes the file name unique will be used
    # The default value is: YES.
    
    FULL_PATH_NAMES        = YES
    
    # The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
    # Stripping is only done if one of the specified strings matches the left-hand
    # part of the path. The tag can be used to show relative paths in the file list.
    # If left blank the directory from which doxygen is run is used as the path to
    # strip.
    #
    # Note that you can specify absolute paths here, but also relative paths, which
    # will be relative from the directory where doxygen is started.
    # This tag requires that the tag FULL_PATH_NAMES is set to YES.
    
    STRIP_FROM_PATH        = 
    
    # The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
    # path mentioned in the documentation of a class, which tells the reader which
    # header file to include in order to use a class. If left blank only the name of
    # the header file containing the class definition is used. Otherwise one should
    # specify the list of include paths that are normally passed to the compiler
    # using the -I flag.
    
    STRIP_FROM_INC_PATH    = 
    
    # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
    # less readable) file names. This can be useful is your file systems doesn't
    # support long names like on DOS, Mac, or CD-ROM.
    # The default value is: NO.
    
    SHORT_NAMES            = NO
    
    # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
    # first line (until the first dot) of a Javadoc-style comment as the brief
    # description. If set to NO, the Javadoc-style will behave just like regular Qt-
    # style comments (thus requiring an explicit @brief command for a brief
    # description.)
    # The default value is: NO.
    
    JAVADOC_AUTOBRIEF      = NO
    
    # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
    # line (until the first dot) of a Qt-style comment as the brief description. If
    # set to NO, the Qt-style will behave just like regular Qt-style comments (thus
    # requiring an explicit \brief command for a brief description.)
    # The default value is: NO.
    
    QT_AUTOBRIEF           = NO
    
    # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
    # multi-line C++ special comment block (i.e. a block of //! or /// comments) as
    # a brief description. This used to be the default behavior. The new default is
    # to treat a multi-line C++ comment block as a detailed description. Set this
    # tag to YES if you prefer the old behavior instead.
    #
    # Note that setting this tag to YES also means that rational rose comments are
    # not recognized any more.
    # The default value is: NO.
    
    MULTILINE_CPP_IS_BRIEF = NO
    
    # If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
    # documentation from any documented member that it re-implements.
    # The default value is: YES.
    
    INHERIT_DOCS           = YES
    
    # If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
    # new page for each member. If set to NO, the documentation of a member will be
    # part of the file/class/namespace that contains it.
    # The default value is: NO.
    
    SEPARATE_MEMBER_PAGES  = NO
    
    # The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
    # uses this value to replace tabs by spaces in code fragments.
    # Minimum value: 1, maximum value: 16, default value: 4.
    
    TAB_SIZE               = 4
    
    # This tag can be used to specify a number of aliases that act as commands in
    # the documentation. An alias has the form:
    # name=value
    # For example adding
    # "sideeffect=@par Side Effects:\n"
    # will allow you to put the command \sideeffect (or @sideeffect) in the
    # documentation, which will result in a user-defined paragraph with heading
    # "Side Effects:". You can put \n's in the value part of an alias to insert
    # newlines.
    
    ALIASES                = 
    
    # This tag can be used to specify a number of word-keyword mappings (TCL only).
    # A mapping has the form "name=value". For example adding "class=itcl::class"
    # will allow you to use the command class in the itcl::class meaning.
    
    TCL_SUBST              = 
    
    # Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
    # only. Doxygen will then generate output that is more tailored for C. For
    # instance, some of the names that are used will be different. The list of all
    # members will be omitted, etc.
    # The default value is: NO.
    
    OPTIMIZE_OUTPUT_FOR_C  = YES
    
    # Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
    # Python sources only. Doxygen will then generate output that is more tailored
    # for that language. For instance, namespaces will be presented as packages,
    # qualified scopes will look different, etc.
    # The default value is: NO.
    
    OPTIMIZE_OUTPUT_JAVA   = NO
    
    # Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
    # sources. Doxygen will then generate output that is tailored for Fortran.
    # The default value is: NO.
    
    OPTIMIZE_FOR_FORTRAN   = NO
    
    # Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
    # sources. Doxygen will then generate output that is tailored for VHDL.
    # The default value is: NO.
    
    OPTIMIZE_OUTPUT_VHDL   = NO
    
    # Doxygen selects the parser to use depending on the extension of the files it
    # parses. With this tag you can assign which parser to use for a given
    # extension. Doxygen has a built-in mapping, but you can override or extend it
    # using this tag. The format is ext=language, where ext is a file extension, and
    # language is one of the parsers supported by doxygen: IDL, Java, Javascript,
    # C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
    # FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
    # Fortran. In the later case the parser tries to guess whether the code is fixed
    # or free formatted code, this is the default for Fortran type files), VHDL. For
    # instance to make doxygen treat .inc files as Fortran files (default is PHP),
    # and .f files as C (default is Fortran), use: inc=Fortran f=C.
    #
    # Note For files without extension you can use no_extension as a placeholder.
    #
    # Note that for custom extensions you also need to set FILE_PATTERNS otherwise
    # the files are not read by doxygen.
    
    EXTENSION_MAPPING      = 
    
    # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
    # according to the Markdown format, which allows for more readable
    # documentation. See http://daringfireball.net/projects/markdown/ for details.
    # The output of markdown processing is further processed by doxygen, so you can
    # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
    # case of backward compatibilities issues.
    # The default value is: YES.
    
    MARKDOWN_SUPPORT       = YES
    
    # When enabled doxygen tries to link words that correspond to documented
    # classes, or namespaces to their corresponding documentation. Such a link can
    # be prevented in individual cases by by putting a % sign in front of the word
    # or globally by setting AUTOLINK_SUPPORT to NO.
    # The default value is: YES.
    
    AUTOLINK_SUPPORT       = YES
    
    # If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
    # to include (a tag file for) the STL sources as input, then you should set this
    # tag to YES in order to let doxygen match functions declarations and
    # definitions whose arguments contain STL classes (e.g. func(std::string);
    # versus func(std::string) {}). This also make the inheritance and collaboration
    # diagrams that involve STL classes more complete and accurate.
    # The default value is: NO.
    
    BUILTIN_STL_SUPPORT    = NO
    
    # If you use Microsoft's C++/CLI language, you should set this option to YES to
    # enable parsing support.
    # The default value is: NO.
    
    CPP_CLI_SUPPORT        = NO
    
    # Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
    # http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
    # will parse them like normal C++ but will assume all classes use public instead
    # of private inheritance when no explicit protection keyword is present.
    # The default value is: NO.
    
    SIP_SUPPORT            = NO
    
    # For Microsoft's IDL there are propget and propput attributes to indicate
    # getter and setter methods for a property. Setting this option to YES will make
    # doxygen to replace the get and set methods by a property in the documentation.
    # This will only work if the methods are indeed getting or setting a simple
    # type. If this is not the case, or you want to show the methods anyway, you
    # should set this option to NO.
    # The default value is: YES.
    
    IDL_PROPERTY_SUPPORT   = YES
    
    # If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
    # tag is set to YES, then doxygen will reuse the documentation of the first
    # member in the group (if any) for the other members of the group. By default
    # all members of a group must be documented explicitly.
    # The default value is: NO.
    
    DISTRIBUTE_GROUP_DOC   = NO
    
    # Set the SUBGROUPING tag to YES to allow class member groups of the same type
    # (for instance a group of public functions) to be put as a subgroup of that
    # type (e.g. under the Public Functions section). Set it to NO to prevent
    # subgrouping. Alternatively, this can be done per class using the
    # \nosubgrouping command.
    # The default value is: YES.
    
    SUBGROUPING            = YES
    
    # When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
    # are shown inside the group in which they are included (e.g. using \ingroup)
    # instead of on a separate page (for HTML and Man pages) or section (for LaTeX
    # and RTF).
    #
    # Note that this feature does not work in combination with
    # SEPARATE_MEMBER_PAGES.
    # The default value is: NO.
    
    INLINE_GROUPED_CLASSES = NO
    
    # When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
    # with only public data fields or simple typedef fields will be shown inline in
    # the documentation of the scope in which they are defined (i.e. file,
    # namespace, or group documentation), provided this scope is documented. If set
    # to NO, structs, classes, and unions are shown on a separate page (for HTML and
    # Man pages) or section (for LaTeX and RTF).
    # The default value is: NO.
    
    INLINE_SIMPLE_STRUCTS  = NO
    
    # When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
    # enum is documented as struct, union, or enum with the name of the typedef. So
    # typedef struct TypeS {} TypeT, will appear in the documentation as a struct
    # with name TypeT. When disabled the typedef will appear as a member of a file,
    # namespace, or class. And the struct will be named TypeS. This can typically be
    # useful for C code in case the coding convention dictates that all compound
    # types are typedef'ed and only the typedef is referenced, never the tag name.
    # The default value is: NO.
    
    TYPEDEF_HIDES_STRUCT   = NO
    
    # The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
    # cache is used to resolve symbols given their name and scope. Since this can be
    # an expensive process and often the same symbol appears multiple times in the
    # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
    # doxygen will become slower. If the cache is too large, memory is wasted. The
    # cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
    # is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
    # symbols. At the end of a run doxygen will report the cache usage and suggest
    # the optimal cache size from a speed point of view.
    # Minimum value: 0, maximum value: 9, default value: 0.
    
    LOOKUP_CACHE_SIZE      = 0
    
    #---------------------------------------------------------------------------
    # Build related configuration options
    #---------------------------------------------------------------------------
    
    # If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
    # documentation are documented, even if no documentation was available. Private
    # class members and static file members will be hidden unless the
    # EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
    # Note: This will also disable the warnings about undocumented members that are
    # normally produced when WARNINGS is set to YES.
    # The default value is: NO.
    
    EXTRACT_ALL            = YES
    
    # If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
    # be included in the documentation.
    # The default value is: NO.
    
    EXTRACT_PRIVATE        = YES
    
    # If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
    # scope will be included in the documentation.
    # The default value is: NO.
    
    EXTRACT_PACKAGE        = NO
    
    # If the EXTRACT_STATIC tag is set to YES all static members of a file will be
    # included in the documentation.
    # The default value is: NO.
    
    EXTRACT_STATIC         = YES
    
    # If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
    # locally in source files will be included in the documentation. If set to NO
    # only classes defined in header files are included. Does not have any effect
    # for Java sources.
    # The default value is: YES.
    
    EXTRACT_LOCAL_CLASSES  = YES
    
    # This flag is only useful for Objective-C code. When set to YES local methods,
    # which are defined in the implementation section but not in the interface are
    # included in the documentation. If set to NO only methods in the interface are
    # included.
    # The default value is: NO.
    
    EXTRACT_LOCAL_METHODS  = NO
    
    # If this flag is set to YES, the members of anonymous namespaces will be
    # extracted and appear in the documentation as a namespace called
    # 'anonymous_namespace{file}', where file will be replaced with the base name of
    # the file that contains the anonymous namespace. By default anonymous namespace
    # are hidden.
    # The default value is: NO.
    
    EXTRACT_ANON_NSPACES   = NO
    
    # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
    # undocumented members inside documented classes or files. If set to NO these
    # members will be included in the various overviews, but no documentation
    # section is generated. This option has no effect if EXTRACT_ALL is enabled.
    # The default value is: NO.
    
    HIDE_UNDOC_MEMBERS     = NO
    
    # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
    # undocumented classes that are normally visible in the class hierarchy. If set
    # to NO these classes will be included in the various overviews. This option has
    # no effect if EXTRACT_ALL is enabled.
    # The default value is: NO.
    
    HIDE_UNDOC_CLASSES     = NO
    
    # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
    # (class|struct|union) declarations. If set to NO these declarations will be
    # included in the documentation.
    # The default value is: NO.
    
    HIDE_FRIEND_COMPOUNDS  = NO
    
    # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
    # documentation blocks found inside the body of a function. If set to NO these
    # blocks will be appended to the function's detailed documentation block.
    # The default value is: NO.
    
    HIDE_IN_BODY_DOCS      = NO
    
    # The INTERNAL_DOCS tag determines if documentation that is typed after a
    # \internal command is included. If the tag is set to NO then the documentation
    # will be excluded. Set it to YES to include the internal documentation.
    # The default value is: NO.
    
    INTERNAL_DOCS          = NO
    
    # If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
    # names in lower-case letters. If set to YES upper-case letters are also
    # allowed. This is useful if you have classes or files whose names only differ
    # in case and if your file system supports case sensitive file names. Windows
    # and Mac users are advised to set this option to NO.
    # The default value is: system dependent.
    
    CASE_SENSE_NAMES       = NO
    
    # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
    # their full class and namespace scopes in the documentation. If set to YES the
    # scope will be hidden.
    # The default value is: NO.
    
    HIDE_SCOPE_NAMES       = YES
    
    # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
    # the files that are included by a file in the documentation of that file.
    # The default value is: YES.
    
    SHOW_INCLUDE_FILES     = YES
    
    # If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
    # grouped member an include statement to the documentation, telling the reader
    # which file to include in order to use the member.
    # The default value is: NO.
    
    SHOW_GROUPED_MEMB_INC  = NO
    
    # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
    # files with double quotes in the documentation rather than with sharp brackets.
    # The default value is: NO.
    
    FORCE_LOCAL_INCLUDES   = NO
    
    # If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
    # documentation for inline members.
    # The default value is: YES.
    
    INLINE_INFO            = YES
    
    # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
    # (detailed) documentation of file and class members alphabetically by member
    # name. If set to NO the members will appear in declaration order.
    # The default value is: YES.
    
    SORT_MEMBER_DOCS       = YES
    
    # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
    # descriptions of file, namespace and class members alphabetically by member
    # name. If set to NO the members will appear in declaration order. Note that
    # this will also influence the order of the classes in the class list.
    # The default value is: NO.
    
    SORT_BRIEF_DOCS        = NO
    
    # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
    # (brief and detailed) documentation of class members so that constructors and
    # destructors are listed first. If set to NO the constructors will appear in the
    # respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
    # Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
    # member documentation.
    # Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
    # detailed member documentation.
    # The default value is: NO.
    
    SORT_MEMBERS_CTORS_1ST = NO
    
    # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
    # of group names into alphabetical order. If set to NO the group names will
    # appear in their defined order.
    # The default value is: NO.
    
    SORT_GROUP_NAMES       = NO
    
    # If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
    # fully-qualified names, including namespaces. If set to NO, the class list will
    # be sorted only by class name, not including the namespace part.
    # Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
    # Note: This option applies only to the class list, not to the alphabetical
    # list.
    # The default value is: NO.
    
    SORT_BY_SCOPE_NAME     = NO
    
    # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
    # type resolution of all parameters of a function it will reject a match between
    # the prototype and the implementation of a member function even if there is
    # only one candidate or it is obvious which candidate to choose by doing a
    # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
    # accept a match between prototype and implementation in such cases.
    # The default value is: NO.
    
    STRICT_PROTO_MATCHING  = NO
    
    # The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
    # todo list. This list is created by putting \todo commands in the
    # documentation.
    # The default value is: YES.
    
    GENERATE_TODOLIST      = YES
    
    # The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
    # test list. This list is created by putting \test commands in the
    # documentation.
    # The default value is: YES.
    
    GENERATE_TESTLIST      = YES
    
    # The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
    # list. This list is created by putting \bug commands in the documentation.
    # The default value is: YES.
    
    GENERATE_BUGLIST       = YES
    
    # The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
    # the deprecated list. This list is created by putting \deprecated commands in
    # the documentation.
    # The default value is: YES.
    
    GENERATE_DEPRECATEDLIST= YES
    
    # The ENABLED_SECTIONS tag can be used to enable conditional documentation
    # sections, marked by \if <section_label> ... \endif and \cond <section_label>
    # ... \endcond blocks.
    
    ENABLED_SECTIONS       = 
    
    # The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
    # initial value of a variable or macro / define can have for it to appear in the
    # documentation. If the initializer consists of more lines than specified here
    # it will be hidden. Use a value of 0 to hide initializers completely. The
    # appearance of the value of individual variables and macros / defines can be
    # controlled using \showinitializer or \hideinitializer command in the
    # documentation regardless of this setting.
    # Minimum value: 0, maximum value: 10000, default value: 30.
    
    MAX_INITIALIZER_LINES  = 30
    
    # Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
    # the bottom of the documentation of classes and structs. If set to YES the list
    # will mention the files that were used to generate the documentation.
    # The default value is: YES.
    
    SHOW_USED_FILES        = YES
    
    # Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
    # will remove the Files entry from the Quick Index and from the Folder Tree View
    # (if specified).
    # The default value is: YES.
    
    SHOW_FILES             = YES
    
    # Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
    # page. This will remove the Namespaces entry from the Quick Index and from the
    # Folder Tree View (if specified).
    # The default value is: YES.
    
    SHOW_NAMESPACES        = YES
    
    # The FILE_VERSION_FILTER tag can be used to specify a program or script that
    # doxygen should invoke to get the current version for each file (typically from
    # the version control system). Doxygen will invoke the program by executing (via
    # popen()) the command command input-file, where command is the value of the
    # FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
    # by doxygen. Whatever the program writes to standard output is used as the file
    # version. For an example see the documentation.
    
    FILE_VERSION_FILTER    = 
    
    # The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
    # by doxygen. The layout file controls the global structure of the generated
    # output files in an output format independent way. To create the layout file
    # that represents doxygen's defaults, run doxygen with the -l option. You can
    # optionally specify a file name after the option, if omitted DoxygenLayout.xml
    # will be used as the name of the layout file.
    #
    # Note that if you run doxygen from a directory containing a file called
    # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
    # tag is left empty.
    
    LAYOUT_FILE            = 
    
    # The CITE_BIB_FILES tag can be used to specify one or more bib files containing
    # the reference definitions. This must be a list of .bib files. The .bib
    # extension is automatically appended if omitted. This requires the bibtex tool
    # to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
    # For LaTeX the style of the bibliography can be controlled using
    # LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
    # search path. Do not use file names with spaces, bibtex cannot handle them. See
    # also \cite for info how to create references.
    
    CITE_BIB_FILES         = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to warning and progress messages
    #---------------------------------------------------------------------------
    
    # The QUIET tag can be used to turn on/off the messages that are generated to
    # standard output by doxygen. If QUIET is set to YES this implies that the
    # messages are off.
    # The default value is: NO.
    
    QUIET                  = NO
    
    # The WARNINGS tag can be used to turn on/off the warning messages that are
    # generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
    # this implies that the warnings are on.
    #
    # Tip: Turn warnings on while writing the documentation.
    # The default value is: YES.
    
    WARNINGS               = YES
    
    # If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
    # warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
    # will automatically be disabled.
    # The default value is: YES.
    
    WARN_IF_UNDOCUMENTED   = YES
    
    # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
    # potential errors in the documentation, such as not documenting some parameters
    # in a documented function, or documenting parameters that don't exist or using
    # markup commands wrongly.
    # The default value is: YES.
    
    WARN_IF_DOC_ERROR      = YES
    
    # This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
    # are documented, but have no documentation for their parameters or return
    # value. If set to NO doxygen will only warn about wrong or incomplete parameter
    # documentation, but not about the absence of documentation.
    # The default value is: NO.
    
    WARN_NO_PARAMDOC       = NO
    
    # The WARN_FORMAT tag determines the format of the warning messages that doxygen
    # can produce. The string should contain the $file, $line, and $text tags, which
    # will be replaced by the file and line number from which the warning originated
    # and the warning text. Optionally the format may contain $version, which will
    # be replaced by the version of the file (if it could be obtained via
    # FILE_VERSION_FILTER)
    # The default value is: $file:$line: $text.
    
    WARN_FORMAT            = "$file:$line: $text"
    
    # The WARN_LOGFILE tag can be used to specify a file to which warning and error
    # messages should be written. If left blank the output is written to standard
    # error (stderr).
    
    WARN_LOGFILE           = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the input files
    #---------------------------------------------------------------------------
    
    # The INPUT tag is used to specify the files and/or directories that contain
    # documented source files. You may enter file names like myfile.cpp or
    # directories like /usr/src/myproject. Separate the files or directories with
    # spaces.
    # Note: If this tag is empty the current directory is searched.
    
    INPUT                  = ../
    
    # This tag can be used to specify the character encoding of the source files
    # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
    # libiconv (or the iconv built into libc) for the transcoding. See the libiconv
    # documentation (see: http://www.gnu.org/software/libiconv) for the list of
    # possible encodings.
    # The default value is: UTF-8.
    
    INPUT_ENCODING         = UTF-8
    
    # If the value of the INPUT tag contains directories, you can use the
    # FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
    # *.h) to filter out the source-files in the directories. If left blank the
    # following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
    # *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
    # *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
    # *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
    # *.qsf, *.as and *.js.
    
    FILE_PATTERNS          = *.c \
                             *.cc \
                             *.cxx \
                             *.cpp \
                             *.c++ \
                             *.d \
                             *.java \
                             *.ii \
                             *.ixx \
                             *.ipp \
                             *.i++ \
                             *.inl \
                             *.h \
                             *.hh \
                             *.hxx \
                             *.hpp \
                             *.h++ \
                             *.idl \
                             *.odl \
                             *.cs \
                             *.php \
                             *.php3 \
                             *.inc \
                             *.m \
                             *.markdown \
                             *.md \
                             *.mm \
                             *.dox \
                             *.py \
                             *.f90 \
                             *.f \
                             *.for \
                             *.vhd \
                             *.vhdl
    
    # The RECURSIVE tag can be used to specify whether or not subdirectories should
    # be searched for input files as well.
    # The default value is: NO.
    
    RECURSIVE              = YES
    
    # The EXCLUDE tag can be used to specify files and/or directories that should be
    # excluded from the INPUT source files. This way you can easily exclude a
    # subdirectory from a directory tree whose root is specified with the INPUT tag.
    #
    # Note that relative paths are relative to the directory from which doxygen is
    # run.
    
    EXCLUDE                = 
    
    # The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
    # directories that are symbolic links (a Unix file system feature) are excluded
    # from the input.
    # The default value is: NO.
    
    EXCLUDE_SYMLINKS       = NO
    
    # If the value of the INPUT tag contains directories, you can use the
    # EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
    # certain files from those directories.
    #
    # Note that the wildcards are matched against the file with absolute path, so to
    # exclude all test directories for example use the pattern */test/*
    
    EXCLUDE_PATTERNS       = 
    
    # The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
    # (namespaces, classes, functions, etc.) that should be excluded from the
    # output. The symbol name can be a fully qualified name, a word, or if the
    # wildcard * is used, a substring. Examples: ANamespace, AClass,
    # AClass::ANamespace, ANamespace::*Test
    #
    # Note that the wildcards are matched against the file with absolute path, so to
    # exclude all test directories use the pattern */test/*
    
    EXCLUDE_SYMBOLS        = 
    
    # The EXAMPLE_PATH tag can be used to specify one or more files or directories
    # that contain example code fragments that are included (see the \include
    # command).
    
    EXAMPLE_PATH           = 
    
    # If the value of the EXAMPLE_PATH tag contains directories, you can use the
    # EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
    # *.h) to filter out the source-files in the directories. If left blank all
    # files are included.
    
    EXAMPLE_PATTERNS       = *
    
    # If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
    # searched for input files to be used with the \include or \dontinclude commands
    # irrespective of the value of the RECURSIVE tag.
    # The default value is: NO.
    
    EXAMPLE_RECURSIVE      = NO
    
    # The IMAGE_PATH tag can be used to specify one or more files or directories
    # that contain images that are to be included in the documentation (see the
    # \image command).
    
    IMAGE_PATH             = 
    
    # The INPUT_FILTER tag can be used to specify a program that doxygen should
    # invoke to filter for each input file. Doxygen will invoke the filter program
    # by executing (via popen()) the command:
    #
    # <filter> <input-file>
    #
    # where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
    # name of an input file. Doxygen will then use the output that the filter
    # program writes to standard output. If FILTER_PATTERNS is specified, this tag
    # will be ignored.
    #
    # Note that the filter must not add or remove lines; it is applied before the
    # code is scanned, but not when the output code is generated. If lines are added
    # or removed, the anchors will not be placed correctly.
    
    INPUT_FILTER           = 
    
    # The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
    # basis. Doxygen will compare the file name with each pattern and apply the
    # filter if there is a match. The filters are a list of the form: pattern=filter
    # (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
    # filters are used. If the FILTER_PATTERNS tag is empty or if none of the
    # patterns match the file name, INPUT_FILTER is applied.
    
    FILTER_PATTERNS        = 
    
    # If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
    # INPUT_FILTER ) will also be used to filter the input files that are used for
    # producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
    # The default value is: NO.
    
    FILTER_SOURCE_FILES    = NO
    
    # The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
    # pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
    # it is also possible to disable source filtering for a specific pattern using
    # *.ext= (so without naming a filter).
    # This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
    
    FILTER_SOURCE_PATTERNS = 
    
    # If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
    # is part of the input, its contents will be placed on the main page
    # (index.html). This can be useful if you have a project on for instance GitHub
    # and want to reuse the introduction page also for the doxygen output.
    
    USE_MDFILE_AS_MAINPAGE = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to source browsing
    #---------------------------------------------------------------------------
    
    # If the SOURCE_BROWSER tag is set to YES then a list of source files will be
    # generated. Documented entities will be cross-referenced with these sources.
    #
    # Note: To get rid of all source code in the generated output, make sure that
    # also VERBATIM_HEADERS is set to NO.
    # The default value is: NO.
    
    SOURCE_BROWSER         = YES
    
    # Setting the INLINE_SOURCES tag to YES will include the body of functions,
    # classes and enums directly into the documentation.
    # The default value is: NO.
    
    INLINE_SOURCES         = NO
    
    # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
    # special comment blocks from generated source code fragments. Normal C, C++ and
    # Fortran comments will always remain visible.
    # The default value is: YES.
    
    STRIP_CODE_COMMENTS    = YES
    
    # If the REFERENCED_BY_RELATION tag is set to YES then for each documented
    # function all documented functions referencing it will be listed.
    # The default value is: NO.
    
    REFERENCED_BY_RELATION = NO
    
    # If the REFERENCES_RELATION tag is set to YES then for each documented function
    # all documented entities called/used by that function will be listed.
    # The default value is: NO.
    
    REFERENCES_RELATION    = NO
    
    # If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
    # to YES, then the hyperlinks from functions in REFERENCES_RELATION and
    # REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
    # link to the documentation.
    # The default value is: YES.
    
    REFERENCES_LINK_SOURCE = YES
    
    # If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
    # source code will show a tooltip with additional information such as prototype,
    # brief description and links to the definition and documentation. Since this
    # will make the HTML file larger and loading of large files a bit slower, you
    # can opt to disable this feature.
    # The default value is: YES.
    # This tag requires that the tag SOURCE_BROWSER is set to YES.
    
    SOURCE_TOOLTIPS        = YES
    
    # If the USE_HTAGS tag is set to YES then the references to source code will
    # point to the HTML generated by the htags(1) tool instead of doxygen built-in
    # source browser. The htags tool is part of GNU's global source tagging system
    # (see http://www.gnu.org/software/global/global.html). You will need version
    # 4.8.6 or higher.
    #
    # To use it do the following:
    # - Install the latest version of global
    # - Enable SOURCE_BROWSER and USE_HTAGS in the config file
    # - Make sure the INPUT points to the root of the source tree
    # - Run doxygen as normal
    #
    # Doxygen will invoke htags (and that will in turn invoke gtags), so these
    # tools must be available from the command line (i.e. in the search path).
    #
    # The result: instead of the source browser generated by doxygen, the links to
    # source code will now point to the output of htags.
    # The default value is: NO.
    # This tag requires that the tag SOURCE_BROWSER is set to YES.
    
    USE_HTAGS              = NO
    
    # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
    # verbatim copy of the header file for each class for which an include is
    # specified. Set to NO to disable this.
    # See also: Section \class.
    # The default value is: YES.
    
    VERBATIM_HEADERS       = YES
    
    # If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
    # clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
    # cost of reduced performance. This can be particularly helpful with template
    # rich C++ code for which doxygen's built-in parser lacks the necessary type
    # information.
    # Note: The availability of this option depends on whether or not doxygen was
    # compiled with the --with-libclang option.
    # The default value is: NO.
    
    CLANG_ASSISTED_PARSING = NO
    
    # If clang assisted parsing is enabled you can provide the compiler with command
    # line options that you would normally use when invoking the compiler. Note that
    # the include paths will already be set by doxygen for the files and directories
    # specified with INPUT and INCLUDE_PATH.
    # This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
    
    CLANG_OPTIONS          = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the alphabetical class index
    #---------------------------------------------------------------------------
    
    # If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
    # compounds will be generated. Enable this if the project contains a lot of
    # classes, structs, unions or interfaces.
    # The default value is: YES.
    
    ALPHABETICAL_INDEX     = YES
    
    # The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
    # which the alphabetical index list will be split.
    # Minimum value: 1, maximum value: 20, default value: 5.
    # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
    
    COLS_IN_ALPHA_INDEX    = 5
    
    # In case all classes in a project start with a common prefix, all classes will
    # be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
    # can be used to specify a prefix (or a list of prefixes) that should be ignored
    # while generating the index headers.
    # This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
    
    IGNORE_PREFIX          = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the HTML output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
    # The default value is: YES.
    
    GENERATE_HTML          = YES
    
    # The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
    # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
    # it.
    # The default directory is: html.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_OUTPUT            = html
    
    # The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
    # generated HTML page (for example: .htm, .php, .asp).
    # The default value is: .html.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_FILE_EXTENSION    = .html
    
    # The HTML_HEADER tag can be used to specify a user-defined HTML header file for
    # each generated HTML page. If the tag is left blank doxygen will generate a
    # standard header.
    #
    # To get valid HTML the header file that includes any scripts and style sheets
    # that doxygen needs, which is dependent on the configuration options used (e.g.
    # the setting GENERATE_TREEVIEW). It is highly recommended to start with a
    # default header using
    # doxygen -w html new_header.html new_footer.html new_stylesheet.css
    # YourConfigFile
    # and then modify the file new_header.html. See also section "Doxygen usage"
    # for information on how to generate the default header that doxygen normally
    # uses.
    # Note: The header is subject to change so you typically have to regenerate the
    # default header when upgrading to a newer version of doxygen. For a description
    # of the possible markers and block names see the documentation.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_HEADER            = 
    
    # The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
    # generated HTML page. If the tag is left blank doxygen will generate a standard
    # footer. See HTML_HEADER for more information on how to generate a default
    # footer and what special commands can be used inside the footer. See also
    # section "Doxygen usage" for information on how to generate the default footer
    # that doxygen normally uses.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_FOOTER            = 
    
    # The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
    # sheet that is used by each HTML page. It can be used to fine-tune the look of
    # the HTML output. If left blank doxygen will generate a default style sheet.
    # See also section "Doxygen usage" for information on how to generate the style
    # sheet that doxygen normally uses.
    # Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
    # it is more robust and this tag (HTML_STYLESHEET) will in the future become
    # obsolete.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_STYLESHEET        = 
    
    # The HTML_EXTRA_STYLESHEET tag can be used to specify an additional user-
    # defined cascading style sheet that is included after the standard style sheets
    # created by doxygen. Using this option one can overrule certain style aspects.
    # This is preferred over using HTML_STYLESHEET since it does not replace the
    # standard style sheet and is therefor more robust against future updates.
    # Doxygen will copy the style sheet file to the output directory. For an example
    # see the documentation.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_EXTRA_STYLESHEET  = 
    
    # The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
    # other source files which should be copied to the HTML output directory. Note
    # that these files will be copied to the base HTML output directory. Use the
    # $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
    # files. In the HTML_STYLESHEET file, use the file name only. Also note that the
    # files will be copied as-is; there are no commands or markers available.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_EXTRA_FILES       = 
    
    # The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
    # will adjust the colors in the stylesheet and background images according to
    # this color. Hue is specified as an angle on a colorwheel, see
    # http://en.wikipedia.org/wiki/Hue for more information. For instance the value
    # 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
    # purple, and 360 is red again.
    # Minimum value: 0, maximum value: 359, default value: 220.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_COLORSTYLE_HUE    = 220
    
    # The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
    # in the HTML output. For a value of 0 the output will use grayscales only. A
    # value of 255 will produce the most vivid colors.
    # Minimum value: 0, maximum value: 255, default value: 100.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_COLORSTYLE_SAT    = 100
    
    # The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
    # luminance component of the colors in the HTML output. Values below 100
    # gradually make the output lighter, whereas values above 100 make the output
    # darker. The value divided by 100 is the actual gamma applied, so 80 represents
    # a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
    # change the gamma.
    # Minimum value: 40, maximum value: 240, default value: 80.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_COLORSTYLE_GAMMA  = 80
    
    # If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
    # page will contain the date and time when the page was generated. Setting this
    # to NO can help when comparing the output of multiple runs.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_TIMESTAMP         = YES
    
    # If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
    # documentation will contain sections that can be hidden and shown after the
    # page has loaded.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_DYNAMIC_SECTIONS  = NO
    
    # With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
    # shown in the various tree structured indices initially; the user can expand
    # and collapse entries dynamically later on. Doxygen will expand the tree to
    # such a level that at most the specified number of entries are visible (unless
    # a fully collapsed tree already exceeds this amount). So setting the number of
    # entries 1 will produce a full collapsed tree by default. 0 is a special value
    # representing an infinite number of entries and will result in a full expanded
    # tree by default.
    # Minimum value: 0, maximum value: 9999, default value: 100.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    HTML_INDEX_NUM_ENTRIES = 100
    
    # If the GENERATE_DOCSET tag is set to YES, additional index files will be
    # generated that can be used as input for Apple's Xcode 3 integrated development
    # environment (see: http://developer.apple.com/tools/xcode/), introduced with
    # OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
    # Makefile in the HTML output directory. Running make will produce the docset in
    # that directory and running make install will install the docset in
    # ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
    # startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
    # for more information.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    GENERATE_DOCSET        = NO
    
    # This tag determines the name of the docset feed. A documentation feed provides
    # an umbrella under which multiple documentation sets from a single provider
    # (such as a company or product suite) can be grouped.
    # The default value is: Doxygen generated docs.
    # This tag requires that the tag GENERATE_DOCSET is set to YES.
    
    DOCSET_FEEDNAME        = "Doxygen generated docs"
    
    # This tag specifies a string that should uniquely identify the documentation
    # set bundle. This should be a reverse domain-name style string, e.g.
    # com.mycompany.MyDocSet. Doxygen will append .docset to the name.
    # The default value is: org.doxygen.Project.
    # This tag requires that the tag GENERATE_DOCSET is set to YES.
    
    DOCSET_BUNDLE_ID       = org.doxygen.Project
    
    # The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
    # the documentation publisher. This should be a reverse domain-name style
    # string, e.g. com.mycompany.MyDocSet.documentation.
    # The default value is: org.doxygen.Publisher.
    # This tag requires that the tag GENERATE_DOCSET is set to YES.
    
    DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
    
    # The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
    # The default value is: Publisher.
    # This tag requires that the tag GENERATE_DOCSET is set to YES.
    
    DOCSET_PUBLISHER_NAME  = Publisher
    
    # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
    # additional HTML index files: index.hhp, index.hhc, and index.hhk. The
    # index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
    # (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
    # Windows.
    #
    # The HTML Help Workshop contains a compiler that can convert all HTML output
    # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
    # files are now used as the Windows 98 help format, and will replace the old
    # Windows help format (.hlp) on all Windows platforms in the future. Compressed
    # HTML files also contain an index, a table of contents, and you can search for
    # words in the documentation. The HTML workshop also contains a viewer for
    # compressed HTML files.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    GENERATE_HTMLHELP      = YES
    
    # The CHM_FILE tag can be used to specify the file name of the resulting .chm
    # file. You can add a path in front of the file if the result should not be
    # written to the html output directory.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    CHM_FILE               = ../ZLL.chm
    
    # The HHC_LOCATION tag can be used to specify the location (absolute path
    # including file name) of the HTML help compiler ( hhc.exe). If non-empty
    # doxygen will try to run the HTML help compiler on the generated index.hhp.
    # The file has to be specified with full path.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    HHC_LOCATION           = "C:/Program Files (x86)/HTML Help Workshop/hhc.exe"
    
    # The GENERATE_CHI flag controls if a separate .chi index file is generated (
    # YES) or that it should be included in the master .chm file ( NO).
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    GENERATE_CHI           = NO
    
    # The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
    # and project file content.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    CHM_INDEX_ENCODING     = GBK
    
    # The BINARY_TOC flag controls whether a binary table of contents is generated (
    # YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
    # enables the Previous and Next buttons.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    BINARY_TOC             = NO
    
    # The TOC_EXPAND flag can be set to YES to add extra items for group members to
    # the table of contents of the HTML help documentation and to the tree view.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTMLHELP is set to YES.
    
    TOC_EXPAND             = NO
    
    # If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
    # QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
    # can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
    # (.qch) of the generated HTML documentation.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    GENERATE_QHP           = NO
    
    # If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
    # the file name of the resulting .qch file. The path specified is relative to
    # the HTML output folder.
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QCH_FILE               = 
    
    # The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
    # Project output. For more information please see Qt Help Project / Namespace
    # (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
    # The default value is: org.doxygen.Project.
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHP_NAMESPACE          = org.doxygen.Project
    
    # The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
    # Help Project output. For more information please see Qt Help Project / Virtual
    # Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
    # folders).
    # The default value is: doc.
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHP_VIRTUAL_FOLDER     = doc
    
    # If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
    # filter to add. For more information please see Qt Help Project / Custom
    # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
    # filters).
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHP_CUST_FILTER_NAME   = 
    
    # The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
    # custom filter to add. For more information please see Qt Help Project / Custom
    # Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
    # filters).
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHP_CUST_FILTER_ATTRS  = 
    
    # The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
    # project's filter section matches. Qt Help Project / Filter Attributes (see:
    # http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHP_SECT_FILTER_ATTRS  = 
    
    # The QHG_LOCATION tag can be used to specify the location of Qt's
    # qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
    # generated .qhp file.
    # This tag requires that the tag GENERATE_QHP is set to YES.
    
    QHG_LOCATION           = 
    
    # If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
    # generated, together with the HTML files, they form an Eclipse help plugin. To
    # install this plugin and make it available under the help contents menu in
    # Eclipse, the contents of the directory containing the HTML and XML files needs
    # to be copied into the plugins directory of eclipse. The name of the directory
    # within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
    # After copying Eclipse needs to be restarted before the help appears.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    GENERATE_ECLIPSEHELP   = NO
    
    # A unique identifier for the Eclipse help plugin. When installing the plugin
    # the directory name containing the HTML and XML files should also have this
    # name. Each documentation set should have its own identifier.
    # The default value is: org.doxygen.Project.
    # This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
    
    ECLIPSE_DOC_ID         = org.doxygen.Project
    
    # If you want full control over the layout of the generated HTML pages it might
    # be necessary to disable the index and replace it with your own. The
    # DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
    # of each HTML page. A value of NO enables the index and the value YES disables
    # it. Since the tabs in the index contain the same information as the navigation
    # tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    DISABLE_INDEX          = NO
    
    # The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
    # structure should be generated to display hierarchical information. If the tag
    # value is set to YES, a side panel will be generated containing a tree-like
    # index structure (just like the one that is generated for HTML Help). For this
    # to work a browser that supports JavaScript, DHTML, CSS and frames is required
    # (i.e. any modern browser). Windows users are probably better off using the
    # HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
    # further fine-tune the look of the index. As an example, the default style
    # sheet generated by doxygen has an example that shows how to put an image at
    # the root of the tree instead of the PROJECT_NAME. Since the tree basically has
    # the same information as the tab index, you could consider setting
    # DISABLE_INDEX to YES when enabling this option.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    GENERATE_TREEVIEW      = NO
    
    # The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
    # doxygen will group on one line in the generated HTML documentation.
    #
    # Note that a value of 0 will completely suppress the enum values from appearing
    # in the overview section.
    # Minimum value: 0, maximum value: 20, default value: 4.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    ENUM_VALUES_PER_LINE   = 4
    
    # If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
    # to set the initial width (in pixels) of the frame in which the tree is shown.
    # Minimum value: 0, maximum value: 1500, default value: 250.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    TREEVIEW_WIDTH         = 250
    
    # When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
    # external symbols imported via tag files in a separate window.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    EXT_LINKS_IN_WINDOW    = NO
    
    # Use this tag to change the font size of LaTeX formulas included as images in
    # the HTML documentation. When you change the font size after a successful
    # doxygen run you need to manually remove any form_*.png images from the HTML
    # output directory to force them to be regenerated.
    # Minimum value: 8, maximum value: 50, default value: 10.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    FORMULA_FONTSIZE       = 10
    
    # Use the FORMULA_TRANPARENT tag to determine whether or not the images
    # generated for formulas are transparent PNGs. Transparent PNGs are not
    # supported properly for IE 6.0, but are supported on all modern browsers.
    #
    # Note that when changing this option you need to delete any form_*.png files in
    # the HTML output directory before the changes have effect.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    FORMULA_TRANSPARENT    = YES
    
    # Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
    # http://www.mathjax.org) which uses client side Javascript for the rendering
    # instead of using prerendered bitmaps. Use this if you do not have LaTeX
    # installed or if you want to formulas look prettier in the HTML output. When
    # enabled you may also need to install MathJax separately and configure the path
    # to it using the MATHJAX_RELPATH option.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    USE_MATHJAX            = NO
    
    # When MathJax is enabled you can set the default output format to be used for
    # the MathJax output. See the MathJax site (see:
    # http://docs.mathjax.org/en/latest/output.html) for more details.
    # Possible values are: HTML-CSS (which is slower, but has the best
    # compatibility), NativeMML (i.e. MathML) and SVG.
    # The default value is: HTML-CSS.
    # This tag requires that the tag USE_MATHJAX is set to YES.
    
    MATHJAX_FORMAT         = HTML-CSS
    
    # When MathJax is enabled you need to specify the location relative to the HTML
    # output directory using the MATHJAX_RELPATH option. The destination directory
    # should contain the MathJax.js script. For instance, if the mathjax directory
    # is located at the same level as the HTML output directory, then
    # MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
    # Content Delivery Network so you can quickly see the result without installing
    # MathJax. However, it is strongly recommended to install a local copy of
    # MathJax from http://www.mathjax.org before deployment.
    # The default value is: http://cdn.mathjax.org/mathjax/latest.
    # This tag requires that the tag USE_MATHJAX is set to YES.
    
    MATHJAX_RELPATH        = http://cdn.mathjax.org/mathjax/latest
    
    # The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
    # extension names that should be enabled during MathJax rendering. For example
    # MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
    # This tag requires that the tag USE_MATHJAX is set to YES.
    
    MATHJAX_EXTENSIONS     = 
    
    # The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
    # of code that will be used on startup of the MathJax code. See the MathJax site
    # (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
    # example see the documentation.
    # This tag requires that the tag USE_MATHJAX is set to YES.
    
    MATHJAX_CODEFILE       = 
    
    # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
    # the HTML output. The underlying search engine uses javascript and DHTML and
    # should work on any modern browser. Note that when using HTML help
    # (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
    # there is already a search function so this one should typically be disabled.
    # For large projects the javascript based search engine can be slow, then
    # enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
    # search using the keyboard; to jump to the search box use <access key> + S
    # (what the <access key> is depends on the OS and browser, but it is typically
    # <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
    # key> to jump into the search results window, the results can be navigated
    # using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
    # the search. The filter options can be selected when the cursor is inside the
    # search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
    # to select a filter and <Enter> or <escape> to activate or cancel the filter
    # option.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_HTML is set to YES.
    
    SEARCHENGINE           = NO
    
    # When the SERVER_BASED_SEARCH tag is enabled the search engine will be
    # implemented using a web server instead of a web client using Javascript. There
    # are two flavors of web server based searching depending on the EXTERNAL_SEARCH
    # setting. When disabled, doxygen will generate a PHP script for searching and
    # an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
    # and searching needs to be provided by external tools. See the section
    # "External Indexing and Searching" for details.
    # The default value is: NO.
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    SERVER_BASED_SEARCH    = NO
    
    # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
    # script for searching. Instead the search results are written to an XML file
    # which needs to be processed by an external indexer. Doxygen will invoke an
    # external search engine pointed to by the SEARCHENGINE_URL option to obtain the
    # search results.
    #
    # Doxygen ships with an example indexer ( doxyindexer) and search engine
    # (doxysearch.cgi) which are based on the open source search engine library
    # Xapian (see: http://xapian.org/).
    #
    # See the section "External Indexing and Searching" for details.
    # The default value is: NO.
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    EXTERNAL_SEARCH        = NO
    
    # The SEARCHENGINE_URL should point to a search engine hosted by a web server
    # which will return the search results when EXTERNAL_SEARCH is enabled.
    #
    # Doxygen ships with an example indexer ( doxyindexer) and search engine
    # (doxysearch.cgi) which are based on the open source search engine library
    # Xapian (see: http://xapian.org/). See the section "External Indexing and
    # Searching" for details.
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    SEARCHENGINE_URL       = 
    
    # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
    # search data is written to a file for indexing by an external tool. With the
    # SEARCHDATA_FILE tag the name of this file can be specified.
    # The default file is: searchdata.xml.
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    SEARCHDATA_FILE        = searchdata.xml
    
    # When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
    # EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
    # useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
    # projects and redirect the results back to the right project.
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    EXTERNAL_SEARCH_ID     = 
    
    # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
    # projects other than the one defined by this configuration file, but that are
    # all added to the same external search index. Each project needs to have a
    # unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
    # to a relative location where the documentation can be found. The format is:
    # EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
    # This tag requires that the tag SEARCHENGINE is set to YES.
    
    EXTRA_SEARCH_MAPPINGS  = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the LaTeX output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
    # The default value is: YES.
    
    GENERATE_LATEX         = YES
    
    # The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
    # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
    # it.
    # The default directory is: latex.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_OUTPUT           = latex
    
    # The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
    # invoked.
    #
    # Note that when enabling USE_PDFLATEX this option is only used for generating
    # bitmaps for formulas in the HTML output, but not in the Makefile that is
    # written to the output directory.
    # The default file is: latex.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_CMD_NAME         = latex
    
    # The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
    # index for LaTeX.
    # The default file is: makeindex.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    MAKEINDEX_CMD_NAME     = makeindex
    
    # If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
    # documents. This may be useful for small projects and may help to save some
    # trees in general.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    COMPACT_LATEX          = NO
    
    # The PAPER_TYPE tag can be used to set the paper type that is used by the
    # printer.
    # Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
    # 14 inches) and executive (7.25 x 10.5 inches).
    # The default value is: a4.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    PAPER_TYPE             = a4
    
    # The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
    # that should be included in the LaTeX output. To get the times font for
    # instance you can specify
    # EXTRA_PACKAGES=times
    # If left blank no extra packages will be included.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    EXTRA_PACKAGES         = 
    
    # The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
    # generated LaTeX document. The header should contain everything until the first
    # chapter. If it is left blank doxygen will generate a standard header. See
    # section "Doxygen usage" for information on how to let doxygen write the
    # default header to a separate file.
    #
    # Note: Only use a user-defined header if you know what you are doing! The
    # following commands have a special meaning inside the header: $title,
    # $datetime, $date, $doxygenversion, $projectname, $projectnumber. Doxygen will
    # replace them by respectively the title of the page, the current date and time,
    # only the current date, the version number of doxygen, the project name (see
    # PROJECT_NAME), or the project number (see PROJECT_NUMBER).
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_HEADER           = 
    
    # The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
    # generated LaTeX document. The footer should contain everything after the last
    # chapter. If it is left blank doxygen will generate a standard footer.
    #
    # Note: Only use a user-defined footer if you know what you are doing!
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_FOOTER           = 
    
    # The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
    # other source files which should be copied to the LATEX_OUTPUT output
    # directory. Note that the files will be copied as-is; there are no commands or
    # markers available.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_EXTRA_FILES      = 
    
    # If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
    # prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
    # contain links (just like the HTML output) instead of page references. This
    # makes the output suitable for online browsing using a PDF viewer.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    PDF_HYPERLINKS         = YES
    
    # If the LATEX_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
    # the PDF file directly from the LaTeX files. Set this option to YES to get a
    # higher quality PDF documentation.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    USE_PDFLATEX           = YES
    
    # If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
    # command to the generated LaTeX files. This will instruct LaTeX to keep running
    # if errors occur, instead of asking the user for help. This option is also used
    # when generating formulas in HTML.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_BATCHMODE        = NO
    
    # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
    # index chapters (such as File Index, Compound Index, etc.) in the output.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_HIDE_INDICES     = NO
    
    # If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
    # code with syntax highlighting in the LaTeX output.
    #
    # Note that which sources are shown also depends on other settings such as
    # SOURCE_BROWSER.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_SOURCE_CODE      = NO
    
    # The LATEX_BIB_STYLE tag can be used to specify the style to use for the
    # bibliography, e.g. plainnat, or ieeetr. See
    # http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
    # The default value is: plain.
    # This tag requires that the tag GENERATE_LATEX is set to YES.
    
    LATEX_BIB_STYLE        = plain
    
    #---------------------------------------------------------------------------
    # Configuration options related to the RTF output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
    # RTF output is optimized for Word 97 and may not look too pretty with other RTF
    # readers/editors.
    # The default value is: NO.
    
    GENERATE_RTF           = NO
    
    # The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
    # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
    # it.
    # The default directory is: rtf.
    # This tag requires that the tag GENERATE_RTF is set to YES.
    
    RTF_OUTPUT             = rtf
    
    # If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
    # documents. This may be useful for small projects and may help to save some
    # trees in general.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_RTF is set to YES.
    
    COMPACT_RTF            = NO
    
    # If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
    # contain hyperlink fields. The RTF file will contain links (just like the HTML
    # output) instead of page references. This makes the output suitable for online
    # browsing using Word or some other Word compatible readers that support those
    # fields.
    #
    # Note: WordPad (write) and others do not support links.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_RTF is set to YES.
    
    RTF_HYPERLINKS         = NO
    
    # Load stylesheet definitions from file. Syntax is similar to doxygen's config
    # file, i.e. a series of assignments. You only have to provide replacements,
    # missing definitions are set to their default value.
    #
    # See also section "Doxygen usage" for information on how to generate the
    # default style sheet that doxygen normally uses.
    # This tag requires that the tag GENERATE_RTF is set to YES.
    
    RTF_STYLESHEET_FILE    = 
    
    # Set optional variables used in the generation of an RTF document. Syntax is
    # similar to doxygen's config file. A template extensions file can be generated
    # using doxygen -e rtf extensionFile.
    # This tag requires that the tag GENERATE_RTF is set to YES.
    
    RTF_EXTENSIONS_FILE    = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the man page output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
    # classes and files.
    # The default value is: NO.
    
    GENERATE_MAN           = NO
    
    # The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
    # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
    # it. A directory man3 will be created inside the directory specified by
    # MAN_OUTPUT.
    # The default directory is: man.
    # This tag requires that the tag GENERATE_MAN is set to YES.
    
    MAN_OUTPUT             = man
    
    # The MAN_EXTENSION tag determines the extension that is added to the generated
    # man pages. In case the manual section does not start with a number, the number
    # 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
    # optional.
    # The default value is: .3.
    # This tag requires that the tag GENERATE_MAN is set to YES.
    
    MAN_EXTENSION          = .3
    
    # The MAN_SUBDIR tag determines the name of the directory created within
    # MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
    # MAN_EXTENSION with the initial . removed.
    # This tag requires that the tag GENERATE_MAN is set to YES.
    
    MAN_SUBDIR             = 
    
    # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
    # will generate one additional man file for each entity documented in the real
    # man page(s). These additional files only source the real man page, but without
    # them the man command would be unable to find the correct page.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_MAN is set to YES.
    
    MAN_LINKS              = NO
    
    #---------------------------------------------------------------------------
    # Configuration options related to the XML output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
    # captures the structure of the code including all documentation.
    # The default value is: NO.
    
    GENERATE_XML           = NO
    
    # The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
    # relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
    # it.
    # The default directory is: xml.
    # This tag requires that the tag GENERATE_XML is set to YES.
    
    XML_OUTPUT             = xml
    
    # If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
    # listings (including syntax highlighting and cross-referencing information) to
    # the XML output. Note that enabling this will significantly increase the size
    # of the XML output.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_XML is set to YES.
    
    XML_PROGRAMLISTING     = YES
    
    #---------------------------------------------------------------------------
    # Configuration options related to the DOCBOOK output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
    # that can be used to generate PDF.
    # The default value is: NO.
    
    GENERATE_DOCBOOK       = NO
    
    # The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
    # If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
    # front of it.
    # The default directory is: docbook.
    # This tag requires that the tag GENERATE_DOCBOOK is set to YES.
    
    DOCBOOK_OUTPUT         = docbook
    
    #---------------------------------------------------------------------------
    # Configuration options for the AutoGen Definitions output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
    # Definitions (see http://autogen.sf.net) file that captures the structure of
    # the code including all documentation. Note that this feature is still
    # experimental and incomplete at the moment.
    # The default value is: NO.
    
    GENERATE_AUTOGEN_DEF   = NO
    
    #---------------------------------------------------------------------------
    # Configuration options related to the Perl module output
    #---------------------------------------------------------------------------
    
    # If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
    # file that captures the structure of the code including all documentation.
    #
    # Note that this feature is still experimental and incomplete at the moment.
    # The default value is: NO.
    
    GENERATE_PERLMOD       = NO
    
    # If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
    # Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
    # output from the Perl module output.
    # The default value is: NO.
    # This tag requires that the tag GENERATE_PERLMOD is set to YES.
    
    PERLMOD_LATEX          = NO
    
    # If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
    # formatted so it can be parsed by a human reader. This is useful if you want to
    # understand what is going on. On the other hand, if this tag is set to NO the
    # size of the Perl module output will be much smaller and Perl will parse it
    # just the same.
    # The default value is: YES.
    # This tag requires that the tag GENERATE_PERLMOD is set to YES.
    
    PERLMOD_PRETTY         = YES
    
    # The names of the make variables in the generated doxyrules.make file are
    # prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
    # so different doxyrules.make files included by the same Makefile don't
    # overwrite each other's variables.
    # This tag requires that the tag GENERATE_PERLMOD is set to YES.
    
    PERLMOD_MAKEVAR_PREFIX = 
    
    #---------------------------------------------------------------------------
    # Configuration options related to the preprocessor
    #---------------------------------------------------------------------------
    
    # If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
    # C-preprocessor directives found in the sources and include files.
    # The default value is: YES.
    
    ENABLE_PREPROCESSING   = YES
    
    # If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
    # in the source code. If set to NO only conditional compilation will be
    # performed. Macro expansion can be done in a controlled way by setting
    # EXPAND_ONLY_PREDEF to YES.
    # The default value is: NO.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    MACRO_EXPANSION        = NO
    
    # If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
    # the macro expansion is limited to the macros specified with the PREDEFINED and
    # EXPAND_AS_DEFINED tags.
    # The default value is: NO.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    EXPAND_ONLY_PREDEF     = NO
    
    # If the SEARCH_INCLUDES tag is set to YES the includes files in the
    # INCLUDE_PATH will be searched if a #include is found.
    # The default value is: YES.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    SEARCH_INCLUDES        = YES
    
    # The INCLUDE_PATH tag can be used to specify one or more directories that
    # contain include files that are not input files but should be processed by the
    # preprocessor.
    # This tag requires that the tag SEARCH_INCLUDES is set to YES.
    
    INCLUDE_PATH           = 
    
    # You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
    # patterns (like *.h and *.hpp) to filter out the header-files in the
    # directories. If left blank, the patterns specified with FILE_PATTERNS will be
    # used.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    INCLUDE_FILE_PATTERNS  = 
    
    # The PREDEFINED tag can be used to specify one or more macro names that are
    # defined before the preprocessor is started (similar to the -D option of e.g.
    # gcc). The argument of the tag is a list of macros of the form: name or
    # name=definition (no spaces). If the definition and the "=" are omitted, "=1"
    # is assumed. To prevent a macro definition from being undefined via #undef or
    # recursively expanded use the := operator instead of the = operator.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    PREDEFINED             = 
    
    # If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
    # tag can be used to specify a list of macro names that should be expanded. The
    # macro definition that is found in the sources will be used. Use the PREDEFINED
    # tag if you want to use a different macro definition that overrules the
    # definition found in the source code.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    EXPAND_AS_DEFINED      = 
    
    # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
    # remove all references to function-like macros that are alone on a line, have
    # an all uppercase name, and do not end with a semicolon. Such function macros
    # are typically used for boiler-plate code, and will confuse the parser if not
    # removed.
    # The default value is: YES.
    # This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
    
    SKIP_FUNCTION_MACROS   = YES
    
    #---------------------------------------------------------------------------
    # Configuration options related to external references
    #---------------------------------------------------------------------------
    
    # The TAGFILES tag can be used to specify one or more tag files. For each tag
    # file the location of the external documentation should be added. The format of
    # a tag file without this location is as follows:
    # TAGFILES = file1 file2 ...
    # Adding location for the tag files is done as follows:
    # TAGFILES = file1=loc1 "file2 = loc2" ...
    # where loc1 and loc2 can be relative or absolute paths or URLs. See the
    # section "Linking to external documentation" for more information about the use
    # of tag files.
    # Note: Each tag file must have a unique name (where the name does NOT include
    # the path). If a tag file is not located in the directory in which doxygen is
    # run, you must also specify the path to the tagfile here.
    
    TAGFILES               = 
    
    # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
    # tag file that is based on the input files it reads. See section "Linking to
    # external documentation" for more information about the usage of tag files.
    
    GENERATE_TAGFILE       = 
    
    # If the ALLEXTERNALS tag is set to YES all external class will be listed in the
    # class index. If set to NO only the inherited external classes will be listed.
    # The default value is: NO.
    
    ALLEXTERNALS           = NO
    
    # If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
    # the modules index. If set to NO, only the current project's groups will be
    # listed.
    # The default value is: YES.
    
    EXTERNAL_GROUPS        = YES
    
    # If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
    # the related pages index. If set to NO, only the current project's pages will
    # be listed.
    # The default value is: YES.
    
    EXTERNAL_PAGES         = YES
    
    # The PERL_PATH should be the absolute path and name of the perl script
    # interpreter (i.e. the result of 'which perl').
    # The default file (with absolute path) is: /usr/bin/perl.
    
    PERL_PATH              = /usr/bin/perl
    
    #---------------------------------------------------------------------------
    # Configuration options related to the dot tool
    #---------------------------------------------------------------------------
    
    # If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
    # (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
    # NO turns the diagrams off. Note that this option also works with HAVE_DOT
    # disabled, but it is recommended to install and use dot, since it yields more
    # powerful graphs.
    # The default value is: YES.
    
    CLASS_DIAGRAMS         = YES
    
    # You can define message sequence charts within doxygen comments using the \msc
    # command. Doxygen will then run the mscgen tool (see:
    # http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
    # documentation. The MSCGEN_PATH tag allows you to specify the directory where
    # the mscgen tool resides. If left empty the tool is assumed to be found in the
    # default search path.
    
    MSCGEN_PATH            = 
    
    # You can include diagrams made with dia in doxygen documentation. Doxygen will
    # then run dia to produce the diagram and insert it in the documentation. The
    # DIA_PATH tag allows you to specify the directory where the dia binary resides.
    # If left empty dia is assumed to be found in the default search path.
    
    DIA_PATH               = 
    
    # If set to YES, the inheritance and collaboration graphs will hide inheritance
    # and usage relations if the target is undocumented or is not a class.
    # The default value is: YES.
    
    HIDE_UNDOC_RELATIONS   = YES
    
    # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
    # available from the path. This tool is part of Graphviz (see:
    # http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
    # Bell Labs. The other options in this section have no effect if this option is
    # set to NO
    # The default value is: NO.
    
    HAVE_DOT               = YES
    
    # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
    # to run in parallel. When set to 0 doxygen will base this on the number of
    # processors available in the system. You can set it explicitly to a value
    # larger than 0 to get control over the balance between CPU load and processing
    # speed.
    # Minimum value: 0, maximum value: 32, default value: 0.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_NUM_THREADS        = 0
    
    # When you want a differently looking font n the dot files that doxygen
    # generates you can specify the font name using DOT_FONTNAME. You need to make
    # sure dot is able to find the font, which can be done by putting it in a
    # standard location or by setting the DOTFONTPATH environment variable or by
    # setting DOT_FONTPATH to the directory containing the font.
    # The default value is: Helvetica.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_FONTNAME           = Helvetica
    
    # The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
    # dot graphs.
    # Minimum value: 4, maximum value: 24, default value: 10.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_FONTSIZE           = 10
    
    # By default doxygen will tell dot to use the default font as specified with
    # DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
    # the path where dot can find it using this tag.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_FONTPATH           = 
    
    # If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
    # each documented class showing the direct and indirect inheritance relations.
    # Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    CLASS_GRAPH            = YES
    
    # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
    # graph for each documented class showing the direct and indirect implementation
    # dependencies (inheritance, containment, and class references variables) of the
    # class with other documented classes.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    COLLABORATION_GRAPH    = YES
    
    # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
    # groups, showing the direct groups dependencies.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    GROUP_GRAPHS           = YES
    
    # If the UML_LOOK tag is set to YES doxygen will generate inheritance and
    # collaboration diagrams in a style similar to the OMG's Unified Modeling
    # Language.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    UML_LOOK               = NO
    
    # If the UML_LOOK tag is enabled, the fields and methods are shown inside the
    # class node. If there are many fields or methods and many nodes the graph may
    # become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
    # number of items for each type to make the size more manageable. Set this to 0
    # for no limit. Note that the threshold may be exceeded by 50% before the limit
    # is enforced. So when you set the threshold to 10, up to 15 fields may appear,
    # but if the number exceeds 15, the total amount of fields shown is limited to
    # 10.
    # Minimum value: 0, maximum value: 100, default value: 10.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    UML_LIMIT_NUM_FIELDS   = 10
    
    # If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
    # collaboration graphs will show the relations between templates and their
    # instances.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    TEMPLATE_RELATIONS     = NO
    
    # If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
    # YES then doxygen will generate a graph for each documented file showing the
    # direct and indirect include dependencies of the file with other documented
    # files.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    INCLUDE_GRAPH          = YES
    
    # If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
    # set to YES then doxygen will generate a graph for each documented file showing
    # the direct and indirect include dependencies of the file with other documented
    # files.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    INCLUDED_BY_GRAPH      = YES
    
    # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
    # dependency graph for every global function or class method.
    #
    # Note that enabling this option will significantly increase the time of a run.
    # So in most cases it will be better to enable call graphs for selected
    # functions only using the \callgraph command.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    CALL_GRAPH             = YES
    
    # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
    # dependency graph for every global function or class method.
    #
    # Note that enabling this option will significantly increase the time of a run.
    # So in most cases it will be better to enable caller graphs for selected
    # functions only using the \callergraph command.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    CALLER_GRAPH           = YES
    
    # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
    # hierarchy of all classes instead of a textual one.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    GRAPHICAL_HIERARCHY    = YES
    
    # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
    # dependencies a directory has on other directories in a graphical way. The
    # dependency relations are determined by the #include relations between the
    # files in the directories.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DIRECTORY_GRAPH        = YES
    
    # The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
    # generated by dot.
    # Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
    # to make the SVG files visible in IE 9+ (other browsers do not have this
    # requirement).
    # Possible values are: png, jpg, gif and svg.
    # The default value is: png.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_IMAGE_FORMAT       = png
    
    # If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
    # enable generation of interactive SVG images that allow zooming and panning.
    #
    # Note that this requires a modern browser other than Internet Explorer. Tested
    # and working are Firefox, Chrome, Safari, and Opera.
    # Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
    # the SVG files visible. Older versions of IE do not have SVG support.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    INTERACTIVE_SVG        = NO
    
    # The DOT_PATH tag can be used to specify the path where the dot tool can be
    # found. If left blank, it is assumed the dot tool can be found in the path.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_PATH               = "c:/Program Files (x86)/graphviz/bin"
    
    # The DOTFILE_DIRS tag can be used to specify one or more directories that
    # contain dot files that are included in the documentation (see the \dotfile
    # command).
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOTFILE_DIRS           = 
    
    # The MSCFILE_DIRS tag can be used to specify one or more directories that
    # contain msc files that are included in the documentation (see the \mscfile
    # command).
    
    MSCFILE_DIRS           = 
    
    # The DIAFILE_DIRS tag can be used to specify one or more directories that
    # contain dia files that are included in the documentation (see the \diafile
    # command).
    
    DIAFILE_DIRS           = 
    
    # The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
    # that will be shown in the graph. If the number of nodes in a graph becomes
    # larger than this value, doxygen will truncate the graph, which is visualized
    # by representing a node as a red box. Note that doxygen if the number of direct
    # children of the root node in a graph is already larger than
    # DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
    # the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
    # Minimum value: 0, maximum value: 10000, default value: 50.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_GRAPH_MAX_NODES    = 50
    
    # The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
    # generated by dot. A depth value of 3 means that only nodes reachable from the
    # root by following a path via at most 3 edges will be shown. Nodes that lay
    # further from the root node will be omitted. Note that setting this option to 1
    # or 2 may greatly reduce the computation time needed for large code bases. Also
    # note that the size of a graph can be further restricted by
    # DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
    # Minimum value: 0, maximum value: 1000, default value: 0.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    MAX_DOT_GRAPH_DEPTH    = 0
    
    # Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
    # background. This is disabled by default, because dot on Windows does not seem
    # to support this out of the box.
    #
    # Warning: Depending on the platform used, enabling this option may lead to
    # badly anti-aliased labels on the edges of a graph (i.e. they become hard to
    # read).
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_TRANSPARENT        = NO
    
    # Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
    # files in one run (i.e. multiple -o and -T options on the command line). This
    # makes dot run faster, but since only newer versions of dot (>1.8.10) support
    # this, this feature is disabled by default.
    # The default value is: NO.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_MULTI_TARGETS      = NO
    
    # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
    # explaining the meaning of the various boxes and arrows in the dot generated
    # graphs.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    GENERATE_LEGEND        = YES
    
    # If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
    # files that are used to generate the various graphs.
    # The default value is: YES.
    # This tag requires that the tag HAVE_DOT is set to YES.
    
    DOT_CLEANUP            = YES