linux内核capable源代码分析

桃扇骨 2022-08-21 02:24 323阅读 0赞

linux内核里对于进程的权限管理有一个很重要的函数capable，以前看了好多遍，今天下决心搞定他，也在此立下一个碑，以后有谁想搞明白他的话，我还可以提供一些帮助。  
capable函数定义在kernel/capability.c，作用是检验当前进程有没有相应的权限，定义如下

int capable(int cap)
    {
    	return __capable(current, cap);
    }

继续看\_\_capable函数，这个函数也定义在kernel/capability.c，定义如下

int __capable(struct task_struct *t, int cap)
    {
    	/*首先执行security_capable函数检查，如果成功就给进程的flags置位，标志获得超级权限，PF_SUPERPRIV定义如下
    	#define PF_SUPERPRIV	0x00000100	/* used super-user privileges */就是超级用户的意思
    	*/
    	if (security_capable(t, cap) == 0) {
    		t->flags |= PF_SUPERPRIV;
    		return 1;
    	}
    	return 0;
    }

我们继续看security\_capable函数，定义在linux/security.h

static inline int security_capable(struct task_struct *tsk, int cap)
    {
    	return cap_capable(tsk, cap);
    }

继续看cap\_capable函数，定义在security/commonncap.c

int cap_capable (struct task_struct *tsk, int cap)
    {
    	/* 权限检查的主要工作函数 */
    	if (cap_raised(tsk->cap_effective, cap))
    		return 0;
    	return -EPERM;
    }

我们继续看cap\_raised，这是一个宏，定义如下  
\#define CAP\_TO\_MASK(x) (1 << (x))  
\#define cap\_raise(c, flag)   (cap\_t(c) |=  CAP\_TO\_MASK(flag))  
\#define cap\_lower(c, flag)   (cap\_t(c) &= ~CAP\_TO\_MASK(flag))  
\#define cap\_raised(c, flag)  (cap\_t(c) & CAP\_TO\_MASK(flag))  
所以可以看出cap\_capable函数就是查看task\_struct的cap\_effective变量，然后与(1<<cap)执行按位与操作。  
cap\_effective变量就是进程结构体里的一个32位的int变量，每一个位代表一个权限，定义如下

/**
     ** POSIX-标准定义的权限能力
     **/
    
    
    #define CAP_CHOWN            0
    
    
    /* Override all DAC access, including ACL execute access if
       [_POSIX_ACL] is defined. Excluding DAC access covered by
       CAP_LINUX_IMMUTABLE. */
    
    
    #define CAP_DAC_OVERRIDE     1
    
    
    /* Overrides all DAC restrictions regarding read and search on files
       and directories, including ACL restrictions if [_POSIX_ACL] is
       defined. Excluding DAC access covered by CAP_LINUX_IMMUTABLE. */
    
    
    #define CAP_DAC_READ_SEARCH  2
        
    /* Overrides all restrictions about allowed operations on files, where
       file owner ID must be equal to the user ID, except where CAP_FSETID
       is applicable. It doesn't override MAC and DAC restrictions. */
    
    
    #define CAP_FOWNER           3
    
    
    /* Overrides the following restrictions that the effective user ID
       shall match the file owner ID when setting the S_ISUID and S_ISGID
       bits on that file; that the effective group ID (or one of the
       supplementary group IDs) shall match the file owner ID when setting
       the S_ISGID bit on that file; that the S_ISUID and S_ISGID bits are
       cleared on successful return from chown(2) (not implemented). */
    
    
    #define CAP_FSETID           4
    
    
    /* Used to decide between falling back on the old suser() or fsuser(). */
    
    
    #define CAP_FS_MASK          0x1f
    
    
    /* Overrides the restriction that the real or effective user ID of a
       process sending a signal must match the real or effective user ID
       of the process receiving the signal. */
    
    
    #define CAP_KILL             5
    
    
    /* Allows setgid(2) manipulation */
    /* Allows setgroups(2) */
    /* Allows forged gids on socket credentials passing. */
    
    
    #define CAP_SETGID           6
    
    
    /* Allows set*uid(2) manipulation (including fsuid). */
    /* Allows forged pids on socket credentials passing. */
    
    
    #define CAP_SETUID           7
    
    
    
    
    /**
     ** Linux-specific capabilities
     **/
    
    
    /* Transfer any capability in your permitted set to any pid,
       remove any capability in your permitted set from any pid */
    
    
    #define CAP_SETPCAP          8
    
    
    /* Allow modification of S_IMMUTABLE and S_APPEND file attributes */
    
    
    #define CAP_LINUX_IMMUTABLE  9
    
    
    /* Allows binding to TCP/UDP sockets below 1024 */
    /* Allows binding to ATM VCIs below 32 */
    
    
    #define CAP_NET_BIND_SERVICE 10
    
    
    /* Allow broadcasting, listen to multicast */
    
    
    #define CAP_NET_BROADCAST    11
    
    
    /* Allow interface configuration */
    /* Allow administration of IP firewall, masquerading and accounting */
    /* Allow setting debug option on sockets */
    /* Allow modification of routing tables */
    /* Allow setting arbitrary process / process group ownership on
       sockets */
    /* Allow binding to any address for transparent proxying */
    /* Allow setting TOS (type of service) */
    /* Allow setting promiscuous mode */
    /* Allow clearing driver statistics */
    /* Allow multicasting */
    /* Allow read/write of device-specific registers */
    /* Allow activation of ATM control sockets */
    
    
    #define CAP_NET_ADMIN        12
    
    
    /* Allow use of RAW sockets */
    /* Allow use of PACKET sockets */
    
    
    #define CAP_NET_RAW          13
    
    
    /* Allow locking of shared memory segments */
    /* Allow mlock and mlockall (which doesn't really have anything to do
       with IPC) */
    
    
    #define CAP_IPC_LOCK         14
    
    
    /* Override IPC ownership checks */
    
    
    #define CAP_IPC_OWNER        15
    
    
    /* Insert and remove kernel modules - modify kernel without limit */
    /* Modify cap_bset */
    #define CAP_SYS_MODULE       16
    
    
    /* Allow ioperm/iopl access */
    /* Allow sending USB messages to any device via /proc/bus/usb */
    
    
    #define CAP_SYS_RAWIO        17
    
    
    /* Allow use of chroot() */
    
    
    #define CAP_SYS_CHROOT       18
    
    
    /* Allow ptrace() of any process */
    
    
    #define CAP_SYS_PTRACE       19
    
    
    /* Allow configuration of process accounting */
    
    
    #define CAP_SYS_PACCT        20
    
    
    /* Allow configuration of the secure attention key */
    /* Allow administration of the random device */
    /* Allow examination and configuration of disk quotas */
    /* Allow configuring the kernel's syslog (printk behaviour) */
    /* Allow setting the domainname */
    /* Allow setting the hostname */
    /* Allow calling bdflush() */
    /* Allow mount() and umount(), setting up new smb connection */
    /* Allow some autofs root ioctls */
    /* Allow nfsservctl */
    /* Allow VM86_REQUEST_IRQ */
    /* Allow to read/write pci config on alpha */
    /* Allow irix_prctl on mips (setstacksize) */
    /* Allow flushing all cache on m68k (sys_cacheflush) */
    /* Allow removing semaphores */
    /* Used instead of CAP_CHOWN to "chown" IPC message queues, semaphores
       and shared memory */
    /* Allow locking/unlocking of shared memory segment */
    /* Allow turning swap on/off */
    /* Allow forged pids on socket credentials passing */
    /* Allow setting readahead and flushing buffers on block devices */
    /* Allow setting geometry in floppy driver */
    /* Allow turning DMA on/off in xd driver */
    /* Allow administration of md devices (mostly the above, but some
       extra ioctls) */
    /* Allow tuning the ide driver */
    /* Allow access to the nvram device */
    /* Allow administration of apm_bios, serial and bttv (TV) device */
    /* Allow manufacturer commands in isdn CAPI support driver */
    /* Allow reading non-standardized portions of pci configuration space */
    /* Allow DDI debug ioctl on sbpcd driver */
    /* Allow setting up serial ports */
    /* Allow sending raw qic-117 commands */
    /* Allow enabling/disabling tagged queuing on SCSI controllers and sending
       arbitrary SCSI commands */
    /* Allow setting encryption key on loopback filesystem */
    /* Allow setting zone reclaim policy */
    
    
    #define CAP_SYS_ADMIN        21
    
    
    /* Allow use of reboot() */
    
    
    #define CAP_SYS_BOOT         22
    
    
    /* Allow raising priority and setting priority on other (different
       UID) processes */
    /* Allow use of FIFO and round-robin (realtime) scheduling on own
       processes and setting the scheduling algorithm used by another
       process. */
    /* Allow setting cpu affinity on other processes */
    
    
    #define CAP_SYS_NICE         23
    
    
    /* Override resource limits. Set resource limits. */
    /* Override quota limits. */
    /* Override reserved space on ext2 filesystem */
    /* Modify data journaling mode on ext3 filesystem (uses journaling
       resources) */
    /* NOTE: ext2 honors fsuid when checking for resource overrides, so 
       you can override using fsuid too */
    /* Override size restrictions on IPC message queues */
    /* Allow more than 64hz interrupts from the real-time clock */
    /* Override max number of consoles on console allocation */
    /* Override max number of keymaps */
    
    
    #define CAP_SYS_RESOURCE     24
    
    
    /* Allow manipulation of system clock */
    /* Allow irix_stime on mips */
    /* Allow setting the real-time clock */
    
    
    #define CAP_SYS_TIME         25
    
    
    /* Allow configuration of tty devices */
    /* Allow vhangup() of tty */
    
    
    #define CAP_SYS_TTY_CONFIG   26
    
    
    /* Allow the privileged aspects of mknod() */
    
    
    #define CAP_MKNOD            27
    
    
    /* Allow taking of leases on files */
    
    
    #define CAP_LEASE            28
    
    
    #define CAP_AUDIT_WRITE      29
    
    
    #define CAP_AUDIT_CONTROL    30

检验权限的时候，就检查进程结构体task\_struct对应的位是不是1就ok了。