openHevc学习笔记：解码器中CTU的TU与PU解码

Bertha 。 2022-08-21 13:55 56阅读 0赞

HEVC解码器的CTU解码（CTU Decoder）部分在整个HEVC解码器中的位置如下图红框所示，在hls\_coding\_unit()之中。CTU解码（CTU Decoder）部分的函数调用关系如下图右边方框所示。(右键新窗口打开查看大图)

![Center][]

## hls\_decode\_entry() ##

hls\_decode\_entry()是FFmpeg HEVC解码器中Slice解码的入口函数。该函数的定义如下所示。

//解码入口函数
    static int hls_decode_entry(AVCodecContext *avctxt, void *isFilterThread)
    {
        HEVCContext *s  = avctxt->priv_data;
        //CTB尺寸
        int ctb_size    = 1 << s->sps->log2_ctb_size;
        int more_data   = 1;
        int x_ctb       = 0;
        int y_ctb       = 0;
        int ctb_addr_ts = s->pps->ctb_addr_rs_to_ts[s->sh.slice_ctb_addr_rs];
    
        if (!ctb_addr_ts && s->sh.dependent_slice_segment_flag) {
            av_log(s->avctx, AV_LOG_ERROR, "Impossible initial tile.\n");
            return AVERROR_INVALIDDATA;
        }
    
        if (s->sh.dependent_slice_segment_flag) {
            int prev_rs = s->pps->ctb_addr_ts_to_rs[ctb_addr_ts - 1];
            if (s->tab_slice_address[prev_rs] != s->sh.slice_addr) {
                av_log(s->avctx, AV_LOG_ERROR, "Previous slice segment missing\n");
                return AVERROR_INVALIDDATA;
            }
        }
    
        while (more_data && ctb_addr_ts < s->sps->ctb_size) {
            int ctb_addr_rs = s->pps->ctb_addr_ts_to_rs[ctb_addr_ts];
            //CTB的位置x和y
            x_ctb = (ctb_addr_rs % ((s->sps->width + ctb_size - 1) >> s->sps->log2_ctb_size)) << s->sps->log2_ctb_size;
            y_ctb = (ctb_addr_rs / ((s->sps->width + ctb_size - 1) >> s->sps->log2_ctb_size)) << s->sps->log2_ctb_size;
            //初始化周围的参数
            hls_decode_neighbour(s, x_ctb, y_ctb, ctb_addr_ts);
            //初始化CABAC
            ff_hevc_cabac_init(s, ctb_addr_ts);
            //样点自适应补偿参数
            hls_sao_param(s, x_ctb >> s->sps->log2_ctb_size, y_ctb >> s->sps->log2_ctb_size);
    
            s->deblock[ctb_addr_rs].beta_offset = s->sh.beta_offset;
            s->deblock[ctb_addr_rs].tc_offset   = s->sh.tc_offset;
            s->filter_slice_edges[ctb_addr_rs]  = s->sh.slice_loop_filter_across_slices_enabled_flag;
            
            //解析四叉树结构，并且解码
            more_data = hls_coding_quadtree(s, x_ctb, y_ctb, s->sps->log2_ctb_size, 0);
            if (more_data < 0) {
                s->tab_slice_address[ctb_addr_rs] = -1;
                return more_data;
            }
    
            ctb_addr_ts++;
            //保存解码信息以供下次使用
            ff_hevc_save_states(s, ctb_addr_ts);
            //去块效应滤波
            ff_hevc_hls_filters(s, x_ctb, y_ctb, ctb_size);
        }
    
        if (x_ctb + ctb_size >= s->sps->width &&
            y_ctb + ctb_size >= s->sps->height)
            ff_hevc_hls_filter(s, x_ctb, y_ctb, ctb_size);
    
        return ctb_addr_ts;
    }

从源代码可以看出，hls\_decode\_entry()调用了5个函数进行解码工作：

> （1）调用hls\_decode\_neighbour初始化CTU周围的参数信息。  
> （2）调用ff\_hevc\_cabac\_init()进行CABAC初始化。  
>

> （3）调用hls\_sao\_param初始化样点自适应补偿参数。  
>

> （4）调用hls\_coding\_quadtree()解码CTU。其中包含了PU和TU的解码。  
> （5）调用ff\_hevc\_hls\_filters()进行滤波。其中包含了去块效应滤波和SAO滤波。  
>

本文分析第四步的PU和TU解码过程

## hls\_coding\_quadtree() ##

hls\_coding\_quadtree()用于解析CTU的四叉树句法结构。该函数的定义如下所示。

/*
     * 解析四叉树结构，并且解码
     * 注意该函数是递归调用
     *
     * s：HEVCContext上下文结构体
     * x_ctb：CB位置的x坐标
     * y_ctb：CB位置的y坐标
     * log2_cb_size：CB大小取log2之后的值
     * cb_depth：深度
     *
     */
    static int hls_coding_quadtree(HEVCContext *s, int x0, int y0,
                                   int log2_cb_size, int cb_depth)
    {
        HEVCLocalContext *lc = s->HEVClc;
        //CB的大小,split flag=0
        //log2_cb_size为CB大小取log之后的结果
        const int cb_size    = 1 << log2_cb_size;
        int ret;
        int qp_block_mask = (1<<(s->sps->log2_ctb_size - s->pps->diff_cu_qp_delta_depth)) - 1;
        int split_cu;
        //确定CU是否还会划分
        lc->ct_depth = cb_depth;
        if (x0 + cb_size <= s->sps->width  &&
            y0 + cb_size <= s->sps->height &&
            log2_cb_size > s->sps->log2_min_cb_size) {
            split_cu = ff_hevc_split_coding_unit_flag_decode(s, cb_depth, x0, y0);
        } else {
            split_cu = (log2_cb_size > s->sps->log2_min_cb_size);
        }
        if (s->pps->cu_qp_delta_enabled_flag &&
            log2_cb_size >= s->sps->log2_ctb_size - s->pps->diff_cu_qp_delta_depth) {
            lc->tu.is_cu_qp_delta_coded = 0;
            lc->tu.cu_qp_delta          = 0;
        }
    
        if (s->sh.cu_chroma_qp_offset_enabled_flag &&
            log2_cb_size >= s->sps->log2_ctb_size - s->pps->diff_cu_chroma_qp_offset_depth) {
            lc->tu.is_cu_chroma_qp_offset_coded = 0;
        }
    
        if (split_cu) {
        	//如果CU还可以继续划分，则继续解析划分后的CU
        	//注意：这里是递归调用
        	//CB的大小,split flag=1
            const int cb_size_split = cb_size >> 1;
            const int x1 = x0 + cb_size_split;
            const int y1 = y0 + cb_size_split;
    
            int more_data = 0;
    
            //注意：
            //CU大小减半，log2_cb_size-1
            //深度d加1，cb_depth+1
            more_data = hls_coding_quadtree(s, x0, y0, log2_cb_size - 1, cb_depth + 1);
            if (more_data < 0)
                return more_data;
    
            if (more_data && x1 < s->sps->width) {
                more_data = hls_coding_quadtree(s, x1, y0, log2_cb_size - 1, cb_depth + 1);
                if (more_data < 0)
                    return more_data;
            }
            if (more_data && y1 < s->sps->height) {
                more_data = hls_coding_quadtree(s, x0, y1, log2_cb_size - 1, cb_depth + 1);
                if (more_data < 0)
                    return more_data;
            }
            if (more_data && x1 < s->sps->width &&
                y1 < s->sps->height) {
                more_data = hls_coding_quadtree(s, x1, y1, log2_cb_size - 1, cb_depth + 1);
                if (more_data < 0)
                    return more_data;
            }
            if(((x0 + (1<<log2_cb_size)) & qp_block_mask) == 0 &&
                ((y0 + (1<<log2_cb_size)) & qp_block_mask) == 0)
                lc->qPy_pred = lc->qp_y;
    
            if (more_data)
                return ((x1 + cb_size_split) < s->sps->width ||
                        (y1 + cb_size_split) < s->sps->height);
            else
                return 0;
        } else {
        	//注意处理的是不可划分的CU单元
        	//处理CU单元-真正的解码
            ret = hls_coding_unit(s, x0, y0, log2_cb_size);
            if (ret < 0)
                return ret;
            if ((!((x0 + cb_size) %
                   (1 << (s->sps->log2_ctb_size))) ||
                 (x0 + cb_size >= s->sps->width)) &&
                (!((y0 + cb_size) %
                   (1 << (s->sps->log2_ctb_size))) ||
                 (y0 + cb_size >= s->sps->height))) {
                int end_of_slice_flag = ff_hevc_end_of_slice_flag_decode(s);
                return !end_of_slice_flag;
            } else {
                return 1;
            }
        }
        return 0;
    }

从源代码可以看出，hls\_coding\_quadtree()首先调用ff\_hevc\_split\_coding\_unit\_flag\_decode()判断当前CU是否还需要划分。如果需要划分的话，就会递归调用4次hls\_coding\_quadtree()分别对4个子块继续进行四叉树解析；如果不需要划分，就会调用hls\_coding\_unit()对CU进行解码。

##  ##

## hls\_coding\_unit() ##

hls\_coding\_unit()用于解码一个CU。该函数的定义如下所示

//处理CU单元-真正的解码
    static int hls_coding_unit(HEVCContext *s, int x0, int y0, int log2_cb_size)
    {
    	//CB大小
        int cb_size          = 1 << log2_cb_size;
        HEVCLocalContext *lc = s->HEVClc;
        int log2_min_cb_size = s->sps->log2_min_cb_size;
        int length           = cb_size >> log2_min_cb_size;
        int min_cb_width     = s->sps->min_cb_width;
        //以最小的CB为单位（例如4x4）的时候，当前CB的位置——x坐标和y坐标
        int x_cb             = x0 >> log2_min_cb_size;
        int y_cb             = y0 >> log2_min_cb_size;
        int idx              = log2_cb_size - 2;
        int qp_block_mask    = (1<<(s->sps->log2_ctb_size - s->pps->diff_cu_qp_delta_depth)) - 1;
        int x, y, ret;
    
        //设置CU的属性值
        lc->cu.x                = x0;
        lc->cu.y                = y0;
        lc->cu.pred_mode        = MODE_INTRA;
        lc->cu.part_mode        = PART_2Nx2N;
        lc->cu.intra_split_flag = 0;
    
        SAMPLE_CTB(s->skip_flag, x_cb, y_cb) = 0;
    
        for (x = 0; x < 4; x++)
            lc->pu.intra_pred_mode[x] = 1;
        if (s->pps->transquant_bypass_enable_flag) {
            lc->cu.cu_transquant_bypass_flag = ff_hevc_cu_transquant_bypass_flag_decode(s);
            if (lc->cu.cu_transquant_bypass_flag)
                set_deblocking_bypass(s, x0, y0, log2_cb_size);
        } else
            lc->cu.cu_transquant_bypass_flag = 0;
    
        if (s->sh.slice_type != I_SLICE) {
        	//Skip类型
            uint8_t skip_flag = ff_hevc_skip_flag_decode(s, x0, y0, x_cb, y_cb);
            //设置到skip_flag缓存中
            x = y_cb * min_cb_width + x_cb;
            for (y = 0; y < length; y++) {
                memset(&s->skip_flag[x], skip_flag, length);
                x += min_cb_width;
            }
            lc->cu.pred_mode = skip_flag ? MODE_SKIP : MODE_INTER;
        } else {
            x = y_cb * min_cb_width + x_cb;
            for (y = 0; y < length; y++) {
                memset(&s->skip_flag[x], 0, length);
                x += min_cb_width;
            }
        }
    
        if (SAMPLE_CTB(s->skip_flag, x_cb, y_cb)) {
            hls_prediction_unit(s, x0, y0, cb_size, cb_size, log2_cb_size, 0, idx);
            intra_prediction_unit_default_value(s, x0, y0, log2_cb_size);
    
            if (!s->sh.disable_deblocking_filter_flag)
                ff_hevc_deblocking_boundary_strengths(s, x0, y0, log2_cb_size);
        } else {
            int pcm_flag = 0;
    
            //读取预测模式（非 I Slice）
            if (s->sh.slice_type != I_SLICE)
                lc->cu.pred_mode = ff_hevc_pred_mode_decode(s);
    
            //不是帧内预测模式的时候
            //或者已经是最小CB的时候
            if (lc->cu.pred_mode != MODE_INTRA ||
                log2_cb_size == s->sps->log2_min_cb_size) {
            	//读取CU分割模式
                lc->cu.part_mode        = ff_hevc_part_mode_decode(s, log2_cb_size);
                lc->cu.intra_split_flag = lc->cu.part_mode == PART_NxN &&
                                          lc->cu.pred_mode == MODE_INTRA;
            }
    
            if (lc->cu.pred_mode == MODE_INTRA) {
            	//帧内预测模式
    
            	//PCM方式编码，不常见
                if (lc->cu.part_mode == PART_2Nx2N && s->sps->pcm_enabled_flag &&
                    log2_cb_size >= s->sps->pcm.log2_min_pcm_cb_size &&
                    log2_cb_size <= s->sps->pcm.log2_max_pcm_cb_size) {
                    pcm_flag = ff_hevc_pcm_flag_decode(s);
                }
                if (pcm_flag) {
                    intra_prediction_unit_default_value(s, x0, y0, log2_cb_size);
                    ret = hls_pcm_sample(s, x0, y0, log2_cb_size);
                    if (s->sps->pcm.loop_filter_disable_flag)
                        set_deblocking_bypass(s, x0, y0, log2_cb_size);
    
                    if (ret < 0)
                        return ret;
                } else {
                    //获取帧内预测模式
                    intra_prediction_unit(s, x0, y0, log2_cb_size);
                }
            } else {
            	//帧间预测模式
                intra_prediction_unit_default_value(s, x0, y0, log2_cb_size);
    
                //帧间模式一共有8种划分模式
    
                switch (lc->cu.part_mode) {
                case PART_2Nx2N:
                	//处理PU单元-运动补偿
    				 /*
                	 * hls_prediction_unit()参数：
                	 * x0 : PU左上角x坐标
                	 * y0 : PU左上角y坐标
                	 * nPbW : PU宽度
                	 * nPbH : PU高度
                	 * log2_cb_size : CB大小取log2()的值
                	 * partIdx : PU的索引号-分成4个块的时候取0-3，分成两个块的时候取0和1
                	 */
                    hls_prediction_unit(s, x0, y0, cb_size, cb_size, log2_cb_size, 0, idx);
                    break;
                case PART_2NxN:
                    hls_prediction_unit(s, x0, y0,               cb_size, cb_size / 2, log2_cb_size, 0, idx);
                    hls_prediction_unit(s, x0, y0 + cb_size / 2, cb_size, cb_size / 2, log2_cb_size, 1, idx);
                    break;
                case PART_Nx2N:
                    hls_prediction_unit(s, x0,               y0, cb_size / 2, cb_size, log2_cb_size, 0, idx - 1);
                    hls_prediction_unit(s, x0 + cb_size / 2, y0, cb_size / 2, cb_size, log2_cb_size, 1, idx - 1);
                    break;
                case PART_2NxnU:
                    hls_prediction_unit(s, x0, y0,               cb_size, cb_size     / 4, log2_cb_size, 0, idx);
                    hls_prediction_unit(s, x0, y0 + cb_size / 4, cb_size, cb_size * 3 / 4, log2_cb_size, 1, idx);
                    break;
                case PART_2NxnD:
                    hls_prediction_unit(s, x0, y0,                   cb_size, cb_size * 3 / 4, log2_cb_size, 0, idx);
                    hls_prediction_unit(s, x0, y0 + cb_size * 3 / 4, cb_size, cb_size     / 4, log2_cb_size, 1, idx);
                    break;
                case PART_nLx2N:
                    hls_prediction_unit(s, x0,               y0, cb_size     / 4, cb_size, log2_cb_size, 0, idx - 2);
                    hls_prediction_unit(s, x0 + cb_size / 4, y0, cb_size * 3 / 4, cb_size, log2_cb_size, 1, idx - 2);
                    break;
                case PART_nRx2N:
                    hls_prediction_unit(s, x0,                   y0, cb_size * 3 / 4, cb_size, log2_cb_size, 0, idx - 2);
                    hls_prediction_unit(s, x0 + cb_size * 3 / 4, y0, cb_size     / 4, cb_size, log2_cb_size, 1, idx - 2);
                    break;
                case PART_NxN:
                    hls_prediction_unit(s, x0,               y0,               cb_size / 2, cb_size / 2, log2_cb_size, 0, idx - 1);
                    hls_prediction_unit(s, x0 + cb_size / 2, y0,               cb_size / 2, cb_size / 2, log2_cb_size, 1, idx - 1);
                    hls_prediction_unit(s, x0,               y0 + cb_size / 2, cb_size / 2, cb_size / 2, log2_cb_size, 2, idx - 1);
                    hls_prediction_unit(s, x0 + cb_size / 2, y0 + cb_size / 2, cb_size / 2, cb_size / 2, log2_cb_size, 3, idx - 1);
                    break;
                }
            }
    
            if (!pcm_flag) {
                int rqt_root_cbf = 1;
    
                if (lc->cu.pred_mode != MODE_INTRA &&
                    !(lc->cu.part_mode == PART_2Nx2N && lc->pu.merge_flag)) {
                    rqt_root_cbf = ff_hevc_no_residual_syntax_flag_decode(s);
                }
                if (rqt_root_cbf) {
                    const static int cbf[2] = { 0 };
                    lc->cu.max_trafo_depth = lc->cu.pred_mode == MODE_INTRA ?
                                             s->sps->max_transform_hierarchy_depth_intra + lc->cu.intra_split_flag :
                                             s->sps->max_transform_hierarchy_depth_inter;
                    //处理TU四叉树
                    ret = hls_transform_tree(s, x0, y0, x0, y0, x0, y0,
                                             log2_cb_size,
                                             log2_cb_size, 0, 0, cbf, cbf);
                    if (ret < 0)
                        return ret;
                } else {
                    if (!s->sh.disable_deblocking_filter_flag)
                        ff_hevc_deblocking_boundary_strengths(s, x0, y0, log2_cb_size);
                }
            }
        }
    
        if (s->pps->cu_qp_delta_enabled_flag && lc->tu.is_cu_qp_delta_coded == 0)
            ff_hevc_set_qPy(s, x0, y0, log2_cb_size);
    
        x = y_cb * min_cb_width + x_cb;
        for (y = 0; y < length; y++) {
            memset(&s->qp_y_tab[x], lc->qp_y, length);
            x += min_cb_width;
        }
    
        if(((x0 + (1<<log2_cb_size)) & qp_block_mask) == 0 &&
           ((y0 + (1<<log2_cb_size)) & qp_block_mask) == 0) {
            lc->qPy_pred = lc->qp_y;
        }
    
        set_ct_depth(s, x0, y0, log2_cb_size, lc->ct_depth);
    
        return 0;
    }

从源代码可以看出，hls\_coding\_unit()主要进行了两个方面的处理：

> （1）调用hls\_prediction\_unit()处理PU。  
> （2）调用hls\_transform\_tree()处理TU树。

其中， hls\_prediction\_unit()完成了以下两步工作：

> （1）解析码流得到运动矢量。HEVC中包含了Merge和AMVP两种运动矢量预测技术。对于使用Merge的码流，调用ff\_hevc\_luma\_mv\_merge\_mode()；对于使用AMVP的码流，调用hevc\_luma\_mv\_mpv\_mode()。  
> （2）根据运动矢量进行运动补偿。对于单向预测亮度运动补偿，调用luma\_mc\_uni()，对于单向预测色度运动补偿，调用chroma\_mc\_uni()；对于双向预测亮度运动补偿，调用luma\_mc\_bi()，对于双向预测色度运动补偿，调用chroma\_mc\_bi()。

而 hls\_transform\_tree()，

首先调用ff\_hevc\_split\_transform\_flag\_decode()判断当前TU是否还需要划分。

如果需要划分的话，就会递归调用4次hls\_transform\_tree()分别对4个子块继续进行四叉树解析；如果不需要划分，就会调用hls\_transform\_unit()对TU进行解码。和前面递归划分CTU至CU的思路是一致的。最终会对每一个TU逐一调用hls\_transform\_unit()进行解码。

## hls\_transform\_unit() ##

hls\_transform\_unit()用于解码一个TU，如果是帧内CU的话，hls\_transform\_unit()会调用HEVCPredContext的intra\_pred\[\]()汇编函数进行帧内预测；然后不论帧内预测还是帧间CU都会调用ff\_hevc\_hls\_residual\_coding()解码残差数据，并叠加在预测数据上。

[Center]: /images/20220724/4f473ee534d448068a0884e73b033496.png