Kubernetes 运维 - 高可用集群方案 Keepalived + Haproxy

短命女 2022-09-10 14:22 331阅读 0赞

### Kubernetes 运维 - 高可用集群方案 ###

*  一、概述
 *  二、搭建负载均衡高可用
 *   *  1.1 基础环境
     *   *  1.1.1 配置Hosts文件
         *  1.1.2 配置互信(可选)
         *  1.1.3 系统优化
         *   *  ① 关闭防火墙&selinux&swap分区&iptables
             *  ② 优化内核参数
             *  ③ 配置时间同步
             *  ④ kube-proxy开启ipvs的前置
         *  1.1.4 安装Docker
         *  1.1.5 安装Kubernetes
         *   *  ① 配置阿里源
             *  ② 安装kubelet
     *  1.2 安装Haproxy
     *   *  1.2.1 通过yum安装haproxy
         *  1.2.2 配置文件
         *  1.2.3 启动并设置开机自启
     *  1.3 部署Keepalived
     *   *  1.3.1 通过yum安装keepalived
         *  1.3.2 配置文件
         *   *  ① Master-01
             *  ② Master-02
             *  ③ Master-03
         *  1.3.3 启动并设置开机自启
     *  1.4 初始化集群
     *   *  1.4.1 创建kubeadm-config文件
         *  1.4.2 创建目录
         *  1.4.3 安装calico网络
         *  1.4.4 上传证书
         *  1.4.5 将其他Master加入到集群
         *  1.4.6 查看集群状态
         *   *  ① 检查etcd集群健康状态
             *  ② 检查组件
         *  1.4.7 设置污点
     *  1.5 测试
     *   *  1.5.1 打开haproxy状态页面

--------------------

# 一、概述 #

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16][]

`Keepalived` 用于提供 `kube-apiserver` 对外服务的 `VIP` 地址  
`Haproxy` 用于监听 `VIP` 地址，后端连接所有 `kube-apiserver` 实例，提供监控检查和负载均衡功能

> keepalived在运行过程中对本机的haproxy进行状态进行周期性检查，如果检测到haproxy进程异常，则触发重新选主的过程，VIP也将漂移到新选出来的节点上，从而实现VIP的高可用

# 二、搭建负载均衡高可用 #

<table> 
 <thead> 
  <tr> 
   <th>节点名</th> 
   <th>IP地址</th> 
   <th>使用端口</th> 
   <th>K8S版本</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td>master-01</td> 
   <td>192.168.0.10</td> 
   <td>HA(8443)</td> 
   <td>1.18.2</td> 
  </tr> 
  <tr> 
   <td>master-02</td> 
   <td>192.168.0.20</td> 
   <td>HA(8443)</td> 
   <td>1.18.2</td> 
  </tr> 
  <tr> 
   <td>master-03</td> 
   <td>192.168.0.30</td> 
   <td>HA(8443)</td> 
   <td>1.18.2</td> 
  </tr> 
 </tbody> 
</table>

## 1.1 基础环境 ##

### 1.1.1 配置Hosts文件 ###

192.168.0.10 master-01
    192.168.0.20 master-02
    192.168.0.30 master-03

### 1.1.2 配置互信(可选) ###

ssh-keygen -t rsa
    ssh-copy-id 节点名

### 1.1.3 系统优化 ###

#### ① 关闭防火墙&selinux&swap分区&iptables ####

systemctl stop firewalld && systemctl disable firewalld
    
    swapoff -a && sed -i '/ swap / s/^$.*$$/#\1/g' /etc/fstab
    
    setenforce 0 && sed -i 's/^SELINUX=.*/SELINUX=disabled/' /etc/selinux/config
    
    yum -y install iptables-services
    systemctl start iptables && systemctl enable iptables
    iptables -F && service iptables save

#### ② 优化内核参数 ####

cat <<EOF >  /etc/sysctl.d/k8s.conf
    net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1
    EOF
    sysctl --system
    
    cat <<EOF > /etc/sysctl.conf
    fs.aio-max-nr=1065535
    kernel.pid_max=600000
    net.ipv4.tcp_max_syn_backlog=30000
    net.core.somaxconn=65535
    net.ipv4.tcp_tw_reuse=1
    net.ipv4.tcp_timestamps=1
    net.ipv4.ip_forward=1
    net.ipv4.ip_local_reserved_ports=30000-32767
    net.ipv4.ip_local_port_range=30000 65000
    net.core.netdev_max_backlog=300000
    net.ipv4.tcp_rmem=4096 87380 134217728
    net.ipv4.tcp_wmem=4096 87380 134217728
    net.ipv4.tcp_sack=0
    net.ipv4.tcp_fin_timeout=20
    fs.inotify.max_user_watches=102400
    EOF
    sysctl -p
    
    modprobe br_netfilter
    sysctl -p /etc/sysctl.d/k8s.conf

#### ③ 配置时间同步 ####

yum install -y chrony
    systemctl enable --now chronyd
    
    timedatectl set-timezone Asia/Shanghai
    timedatectl set-local-rtc 0

#### ④ kube-proxy开启ipvs的前置 ####

yum install ipset ipvsadm -y
    
    cat > /etc/sysconfig/modules/ipvs.modules <<EOF
    #!/bin/bash
    modprobe -- ip_vs
    modprobe -- ip_vs_rr
    modprobe -- ip_vs_wrr
    modprobe -- ip_vs_sh
    modprobe -- nf_conntrack_ipv4
    EOF
    
    chmod 755 /etc/sysconfig/modules/ipvs.modules && bash /etc/sysconfig/modules/ipvs.modules && lsmod | grep -e ip_vs -e nf_conntrack_ipv4

### 1.1.4 安装Docker ###

[Docker 运维 - 从零开始学习][Docker _ -]

> 本章中部署的K8S版本为1.18.2，需要安装Docker版本为18.09.1

### 1.1.5 安装Kubernetes ###

#### ① 配置阿里源 ####

cat > /etc/yum.repos.d/kubernetes.repo << EOF
    [kubernetes]
    name=Kubernetes
    baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
    enabled=1
    gpgcheck=0
    repo_gpgcheck=0
    gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
    EOF

#### ② 安装kubelet ####

yum install -y kubelet-1.18.2 kubeadm-1.18.2 kubectl-1.18.2
    rpm -qa | grep kube
    systemctl enable kubelet

## 1.2 安装Haproxy ##

### 1.2.1 通过yum安装haproxy ###

yum -y install haproxy

### 1.2.2 配置文件 ###

vim /etc/haproxy/haproxy.cfg
    
    global
        log /dev/log    local0
        log /dev/log    local1 notice
        chroot /var/lib/haproxy
        stats socket /var/run/haproxy-admin.sock mode 660 level admin
        stats timeout 30s
        user haproxy
        group haproxy
        daemon
        nbproc 1
    
    defaults
        log     global
        timeout connect 5000
        timeout client  10m
        timeout server  10m
    
    listen  admin_stats
        bind 0.0.0.0:10080
        mode http
        log 127.0.0.1 local0 err
        stats refresh 30s
        stats uri /status
        stats realm welcome login\ Haproxy
        stats auth admin:123456
        stats hide-version
        stats admin if TRUE
    
    listen kube-master
        bind 0.0.0.0:8443
        mode tcp
        option tcplog
        balance source
        server 192.168.0.10 192.168.0.10:6443 check inter 2000 fall 2 rise 2 weight 1
        server 192.168.0.20 192.168.0.20:6443 check inter 2000 fall 2 rise 2 weight 1
        server 192.168.0.30 192.168.0.30:6443 check inter 2000 fall 2 rise 2 weight 1

### 1.2.3 启动并设置开机自启 ###

systemctl enable haproxy && systemctl restart haproxy
    netstat -lnpt|grep haproxy

![e237076a88634e149e6b53cc001be1c3.png][]

## 1.3 部署Keepalived ##

### 1.3.1 通过yum安装keepalived ###

yum -y install keepalived

### 1.3.2 配置文件 ###

vim /etc/keepalived/keepalived.conf

#### ① Master-01 ####

global_defs {
        
       router_id master-01
    }
    vrrp_script check-haproxy {
        
        #检查所在节点的 haproxy 进程是否正常。如果异常则将权重减少3
        script "killall -0 haproxy"
        interval 5
        weight -3
    }
    vrrp_instance VI_1 {
        
        state MASTER
        #VIP所在接口
        interface ens33
        dont_track_primary
        #VIP末段
        virtual_router_id 100
        priority 100
        advert_int 3
        track_script {
        
            check-haproxy
        }
        virtual_ipaddress {
        
            192.168.0.100/24
        }
    }

#### ② Master-02 ####

global_defs {
        
       router_id master-01
    }
    vrrp_script check-haproxy {
        
        script "killall -0 haproxy"
        interval 5
        weight -3
    }
    vrrp_instance VI_1 {
        
        state BACKUP
        interface ens33
        virtual_router_id 100
        dont_track_primary
        priority 99
        advert_int 3
        track_script {
        
            check-haproxy
        }
        virtual_ipaddress {
        
            192.168.0.100/24
        }
    }

#### ③ Master-03 ####

global_defs {
        
       router_id master-01
    }
    vrrp_script check-haproxy {
        
        script "killall -0 haproxy"
        interval 5
        weight -3
    }
    vrrp_instance VI_1 {
        
        state BACKUP
        interface ens33
        virtual_router_id 100
        dont_track_primary
        priority 98
        advert_int 3
        track_script {
        
            check-haproxy
        }
        virtual_ipaddress {
        
            192.168.0.100/24
        }
    }

### 1.3.3 启动并设置开机自启 ###

systemctl start keepalived && systemctl enable keepalived
    
    ip a

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 1][]

## 1.4 初始化集群 ##

### 1.4.1 创建kubeadm-config文件 ###

mkdir k8s
    cd k8s
    
    cat > kubeadm-config.yaml << EOF
    apiVersion: kubeadm.k8s.io/v1beta2
    kind: ClusterConfiguration
    kubernetesVersion: v1.18.2
    apiServer:
      certSANs:
      - 192.168.0.10  #Master-01
      - 192.168.0.20  #Master-02
      - 192.168.0.30  #Master-03
      - 192.168.0.100 #VIP
    controlPlaneEndpoint: "192.168.0.100:6443"
    imageRepository: registry.aliyuncs.com/google_containers
    
    networking:
      podSubnet: "10.244.0.0/16"
      serviceSubnet: 10.1.0.0/16
    
    ---
    apiVersion: kubeproxy.config.k8s.io/v1alpha1
    kind: KubeProxyConfiguration
    featureGates:
      SupportIPVSProxyMode: true
    mode: ipvs
    EOF
    
    
    kubeadm init --config=kubeadm-config.yaml

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_19_color_FFFFFF_t_70_g_se_x_16][]

### 1.4.2 创建目录 ###

mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown $(id -u):$(id -g) $HOME/.kube/config

### 1.4.3 安装calico网络 ###

kubectl apply -f https://docs.projectcalico.org/manifests/calico.yaml

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 2][]

### 1.4.4 上传证书 ###

先在集群的另外两个Master上创建目录

mkdir -p /etc/kubernetes/pki/etcd

在Master-01创建拷贝脚本

echo 'USER=root
    CONTROL_PLANE_IPS="192.168.0.20 192.168.0.30"
    for host in ${CONTROL_PLANE_IPS}; do
        scp /etc/kubernetes/pki/ca.crt "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/ca.key "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/sa.key "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/sa.pub "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/front-proxy-ca.crt "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/front-proxy-ca.key "${
         USER}"@$host:/etc/kubernetes/pki/
        scp /etc/kubernetes/pki/etcd/ca.crt "${
         USER}"@$host:/etc/kubernetes/pki/etcd/
        scp /etc/kubernetes/pki/etcd/ca.key "${
         USER}"@$host:/etc/kubernetes/pki/etcd/
    done' > ca.sh
    
    bash ca.sh

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 3][]

### 1.4.5 将其他Master加入到集群 ###

kubeadm join 192.168.0.100:6443 --token edb58d.82zbfmb419vfwfg2 \
        --discovery-token-ca-cert-hash sha256:b3a573358f29f39c20a6e588481f150ea97cc2fe462331282dfc5cb34b88a06e \
        --control-plane

![ecb6601bfd944b6f8cc43b46d735362d.png][]

### 1.4.6 查看集群状态 ###

#### ① 检查etcd集群健康状态 ####

ETCD=`docker ps|grep etcd|grep -v POD|awk '{print $1}'`
    docker exec \
      -it ${ETCD} \
      etcdctl \
      --endpoints https://127.0.0.1:2379 \
      --cacert /etc/kubernetes/pki/etcd/ca.crt \
      --cert /etc/kubernetes/pki/etcd/peer.crt \
      --key /etc/kubernetes/pki/etcd/peer.key \
      member list

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 4][]

#### ② 检查组件 ####

kubectl get pods -n kube-system

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_19_color_FFFFFF_t_70_g_se_x_16 1][]

### 1.4.7 设置污点 ###

使Master参与POD资源负载

kubectl taint nodes master-02 node-role.kubernetes.io/master-
    kubectl taint nodes master-03 node-role.kubernetes.io/master-

## 1.5 测试 ##

### 1.5.1 打开haproxy状态页面 ###

> 账号：admin 密码：123456 \[在/etc/haproxy/haproxy.cfg中修改\]

#Master-VIP
    192.168.0.100:10080/status

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_18_color_FFFFFF_t_70_g_se_x_16][]  
![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 5][]  
![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_16_color_FFFFFF_t_70_g_se_x_16][]

[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16]: /images/20220829/7e2d18af29db4cb4b02242466f837e48.png
[Docker _ -]: https://blog.csdn.net/qq_42427971/article/details/117036778
[e237076a88634e149e6b53cc001be1c3.png]: /images/20220829/435bbbdb916143d394f7dc1d28a98a9f.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 1]: /images/20220829/da5186625dca429981f4384309cab389.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_19_color_FFFFFF_t_70_g_se_x_16]: /images/20220829/e09d3c9f32b64e288b90dfe5acf9395e.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 2]: /images/20220829/3425eaae1358491eac71df6ef868d7fc.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 3]: /images/20220829/23cb9c89175b4902a9ea3ece75b71ac9.png
[ecb6601bfd944b6f8cc43b46d735362d.png]: /images/20220829/4e6b397e05364d47b2cb050bcb6e6453.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 4]: /images/20220829/d7ab174803bd444dbf2754bf7c76d667.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_19_color_FFFFFF_t_70_g_se_x_16 1]: /images/20220829/970fb5ccdd0e481ab8d2f7c761dfb61f.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_18_color_FFFFFF_t_70_g_se_x_16]: /images/20220829/46fa092df1d64701b4bb897b0cb49009.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_20_color_FFFFFF_t_70_g_se_x_16 5]: /images/20220829/fcd241a78d534eedae3450183d1bad98.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBAc2VyZW5kaXBpdHlfY2F0_size_16_color_FFFFFF_t_70_g_se_x_16]: /images/20220829/f00c838afe604894b0c790ba3cf1a45c.png