s3c2416 3.5寸屏ili9486 BT035H驱动

深藏阁楼爱情的钟 2022-09-17 06:15 183阅读 0赞

这个型号的屏原来在6410上调过，昨天在2416上重新调了一次，把驱动贴上来给大家参考一上.这个是ＩＯ模拟ＳＰＩ的屏，用到了ＬＣＤ的信号线ＶＤ０，ＶＤ１，ＶＤ８，ＶＤ９，请在ＬＣＤ初始化的时候不要把这几个初始化成LCD数据线。

文件名:gzsd\_ili9486.c

内容如下:

/*
     * drivers/video/samsung/gzsd_ili9486.c
     *
     * $Id: gzsd_ili9486.c,v 1.0 2012/11/24 14:22:24 
     *
     * Copyright (C) 2012 Hcly Dao <hclydao@gmail.com>
     *
     * This file is subject to the terms and conditions of the GNU General Public
     * License.  See the file COPYING in the main directory of this archive for
     * more details.
     *
     *	S3C Frame Buffer Driver
     *	based on skeletonfb.c, sa1100fb.h, s3c2410fb.c
     */
    #include <linux/module.h>
    #include <linux/kernel.h>
    #include <linux/init.h>
    #include <linux/string.h>
    #include <linux/init.h>
    #include <linux/delay.h>
    #include <mach/regs-gpio.h>
    #include <linux/gpio.h>
    #include <plat/gpio-cfg.h>
    
    #define SPI_CS S3C2410_GPC(8)
    #define SPI_CLK S3C2410_GPD(0)
    #define SPI_SDI	S3C2410_GPC(9)
    #define RESET	S3C2410_GPD(1)
    
    static void set_cs(int cs)
    {
    	gpio_set_value(SPI_CS,cs);
    }
    
    static void set_clk(int clk)
    {
    	gpio_set_value(SPI_CLK,clk);
    }
    
    static void set_outdata(int outdata)
    {
    	gpio_set_value(SPI_SDI,outdata);
    }
    
    static void send_data(unsigned int data)
    {
    	unsigned int i;
    	int clk_num;
    	int clk_mask;
    	set_cs(0);
    	udelay(10);
    	set_clk(1);
    	set_outdata(1);
    	udelay(10);
    
    	clk_num = 9;
    	clk_mask = 0x100;
    	udelay(50);
    
    	for(i = 0; i < clk_num; ++i){
    		set_clk(0);
    		if(data & clk_mask){
    			set_outdata(1);
    		}
    		else{
    			set_outdata(0);
    		}
    		udelay(100);
    		set_clk(1);
    		udelay(100);
    		data <<= 1;
    	}
    	set_outdata(1);
    	set_cs(1);
    }
    
    static void ili9486_write_cmd(unsigned char cmd)
    {
    	unsigned int out;
    	out = (cmd & 0xFF);
    	send_data(out);
    }
    
    static void ili9486_write_data(unsigned char data)
    {
    	unsigned int out = (data & 0xFF) | 0x100;
    	send_data(out);
    }
    
    static void set_ili9486(void)
    {
    	ili9486_write_cmd(0XF1);
    	ili9486_write_data(0x36);
    	ili9486_write_data(0x04);
    	ili9486_write_data(0x00);
    	ili9486_write_data(0x3c);
    	ili9486_write_data(0x0f);
    	ili9486_write_data(0x8f);
    
    	ili9486_write_cmd(0XF2);
    	ili9486_write_data(0x18);
    	ili9486_write_data(0xa3);
    	ili9486_write_data(0x12);
    	ili9486_write_data(0x02);
    	ili9486_write_data(0xb2);
    	ili9486_write_data(0x12);
    	ili9486_write_data(0xff);
    	ili9486_write_data(0x10);
    	ili9486_write_data(0x00);
    
    	ili9486_write_cmd(0XF8);
    	ili9486_write_data(0x21);
    	ili9486_write_data(0x04);
    
    	ili9486_write_cmd(0XF9);
    	ili9486_write_data(0x00);
    	ili9486_write_data(0x08);
    
    	ili9486_write_cmd(0XB1);
    	ili9486_write_data(0xB0);
    	ili9486_write_data(0x11);
    
    	ili9486_write_cmd(0XB4);
    	ili9486_write_data(0x02);
    
    	ili9486_write_cmd(0XB6);
    	ili9486_write_data(0x32);  //0x22 internal syytem  clock
    	ili9486_write_data(0x62);
    	ili9486_write_data(0x3B);
    
    	ili9486_write_cmd(0XC0);
    	ili9486_write_data(0x09);
    	ili9486_write_data(0x09);
    
    	ili9486_write_cmd(0XC1);
    	ili9486_write_data(0x41);
    	ili9486_write_cmd(0XC2);
    	ili9486_write_data(0x22);
    
    
    	ili9486_write_cmd(0XC5);
    	ili9486_write_data(0x00);
    	ili9486_write_data(0x36);
    
    	ili9486_write_cmd(0x36);
    	ili9486_write_data(0x88);
    
    	ili9486_write_cmd(0x3A);
    	ili9486_write_data(0x66); // 8bit,16bit=0x55 18bit=0x66
    
    	ili9486_write_cmd(0xE0);
    	ili9486_write_data(0x00);
    	ili9486_write_data(0x2C);
    	ili9486_write_data(0x2C);
    	ili9486_write_data(0x0B);
    	ili9486_write_data(0x0C);
    	ili9486_write_data(0x04);
    	ili9486_write_data(0x4C);
    	ili9486_write_data(0x64);
    	ili9486_write_data(0x36);
    	ili9486_write_data(0x03);
    	ili9486_write_data(0x0E);
    	ili9486_write_data(0x01);
    	ili9486_write_data(0x10);
    	ili9486_write_data(0x01);
    	ili9486_write_data(0x00);
    
    	ili9486_write_cmd(0XE1);
    	ili9486_write_data(0x0f);
    	ili9486_write_data(0x37);
    	ili9486_write_data(0x37);
    	ili9486_write_data(0x0C);
    	ili9486_write_data(0x0F);
    	ili9486_write_data(0x05);
    	ili9486_write_data(0x50);
    	ili9486_write_data(0x32);
    	ili9486_write_data(0x36);
    	ili9486_write_data(0x04);
    	ili9486_write_data(0x0B);
    	ili9486_write_data(0x00);
    	ili9486_write_data(0x19);
    	ili9486_write_data(0x14);
    	ili9486_write_data(0x0F);
    
    	ili9486_write_cmd(0x21);
    
    	ili9486_write_cmd(0x11);
    	mdelay(200);
    	ili9486_write_cmd(0x29);
    
    }
    
    static void ili9486_reset(void)
    {
    	gpio_set_value(RESET,1);
    	mdelay(1);
    	gpio_set_value(RESET,0);
    	mdelay(100);
    	gpio_set_value(RESET,1);
    	mdelay(20);
    }
    
    static int cfg_gpio()
    {
    	int err;
    
    	err = gpio_request(SPI_CS, "GPI0"); //cs
    	if (err) {
    		printk(KERN_ERR "failed to request GPI0 for "
    				"ili9486 cs control\n");
    		return err;
    	}
    
    	err = gpio_request(SPI_SDI, "GPI1"); //data
    	if (err) {
    		printk(KERN_ERR "failed to request GPI1 for "
    				"ili9486 outdata control\n");
    		return err;
    	}
    
    	err = gpio_request(SPI_CLK, "GPI8"); //clk
    	if (err) {
    		printk(KERN_ERR "failed to request GPI8 for "
    				"ili9486 clk control\n");
    		return err;
    	}
    
    	err = gpio_request(RESET, "GPI9"); //reset
    	if (err) {
    		printk(KERN_ERR "failed to request GPI9 for "
    				"ili9486 reset control\n");
    		return err;
    	}
    
    	s3c_gpio_cfgpin(SPI_CS, S3C_GPIO_OUTPUT);	//cs
    	s3c_gpio_setpull(SPI_CS, S3C_GPIO_PULL_UP);
    
    	s3c_gpio_cfgpin(SPI_SDI, S3C_GPIO_OUTPUT);	//outdata
    	s3c_gpio_setpull(SPI_SDI, S3C_GPIO_PULL_UP);
    
    	s3c_gpio_cfgpin(SPI_CLK,S3C_GPIO_OUTPUT);	//clk
    	s3c_gpio_setpull(SPI_CLK, S3C_GPIO_PULL_UP);
    
    	s3c_gpio_cfgpin(RESET, S3C_GPIO_OUTPUT);	//reset
    	s3c_gpio_setpull(RESET, S3C_GPIO_PULL_UP);
    
    	return 0;
    }
    
    static void ili9486_release(void)
    {
    	set_cs(1);
    	set_clk(1);
    	set_outdata(1);
    	gpio_free(SPI_CS);
    	gpio_free(SPI_SDI);
    	gpio_free(SPI_CLK);
    	gpio_free(RESET);
    }
    
    static void __init ili9486_init(void)
    {
    	int err;	
    	err = cfg_gpio();
    	if(err < 0)
    		return;
    	ili9486_reset();
    	set_ili9486();
    	printk(KERN_INFO "Gzsd LCD ili9486 init successfully!\n");
    
    }
    
    static void __exit ili9486_exit(void)
    {
    	ili9486_release();
    }
    
    module_init(ili9486_init);
    module_exit(ili9486_exit);
    
    MODULE_AUTHOR("Hcly Dao <hclydao@gmail.com>");
    MODULE_DESCRIPTION("Gzsd210 ili9486 driver");
    MODULE_LICENSE("GPL");

2416下这个文件我是放在arch/arm/mach- s3c2416文件夹下

屏幕参数配制如下:

#define S3CFB_HFP			2//10//20//19	/* front porch */
    #define S3CFB_HSW			41//15//27	/* hsync width */
    #define S3CFB_HBP			2//30//37	/* back porch */
    
    #define S3CFB_VFP			1//8//3//10	/* front porch */
    #define S3CFB_VSW			2//2//13	/* vsync width */
    #define S3CFB_VBP			1//20//26	/* back porch */
    
    #define S3CFB_HRES			320	/* horizon pixel  x resolition */
    #define S3CFB_VRES			480	/* line cnt       y resolution */
    
    #define S3CFB_HRES_VIRTUAL	320	/* horizon pixel  x resolition */
    #define S3CFB_VRES_VIRTUAL	960	/* line cnt       y resolution */
    
    #define S3CFB_HRES_OSD		320	/* horizon pixel  x resolition */
    #define S3CFB_VRES_OSD		480	/* line cnt       y resolution */
    
    #define S3CFB_VFRAME_FREQ	80	/* frame rate freq */
    
    #define S3CFB_PIXEL_CLOCK	12

这里说下点时钟的计算方法:

PIXCLK=(S3CFB\_VFRAME\_FREQ \* (S3CFB\_HFP + S3CFB\_HSW + S3CFB\_HBP + S3CFB\_HRES) \* (S3CFB\_VFP + S3CFB\_VSW + S3CFB\_VBP + S3CFB\_VRES))

=80\*365\*484

=14132800

理论上这里的点时钟应该是14.13Ｍ　用示波器量出来应该是这么多，不过上体效果得调了才知道。

我这里设置的

\#define S3CFB\_PIXEL\_CLOCK    12

是多少Ｍ具体我就不记得了。