RocketMQ消息存储篇（一）

川长思鸟来 2022-11-05 05:20 255阅读 0赞

# 存储概要设计 #

**RocketMQ主要存储的文件包括Comitlog文件、ConsumeQueue文件、IndexFile文件。RocketMQ将所有主题的消息存储在同一个文件中，确保消息发送时顺序写文件，尽最大的能力确保消息发送的高性能与高吞吐量。但由于消息中间件一般是基于消息主题的订阅机制，这样便给按照消息主题检索消息带来了极大的不便。为了提高消息消费的效率，RocketMQ引入了ConsumeQueue消息队列文件，每个消息主题包含多个消息消费队列，每一个消息队列有一个消息文件。IndexFile索引文件，其主要设计理念就是为了加速消息的检索性能，根据消息的属性快速从Commitlog文件中检索消息。**

![RocketMQ消息存储设计原理图][RocketMQ] RocketMQ消息存储设计原理图

*  CommitLog：消息存储文件，所有消息主题的消息都存储在CommitLog文件中。
 *  ConsumeQueue：消息消费队列，消息到达CommitLog文件后，将异步转发到消息消费队列，供消息消费者消费。
 *  IndexFile：消息索引文件，主要存储消息Key与Offset的对应关系。
 *  事务状态服务：存储每条消息的事务状态。
 *  定时消息服务：每一个延迟级别对应一个消息消费队列，存储延迟队列的消息拉取进度。

**RocketMQ主要存储文件包含消息文件（commitlog）、消息消费队列文件（Consume-Queue）、Hash索引文件（IndexFile）、检测点文件（checkpoint）、abort（关闭异常文件）。单个消息存储文件、消息消费队列文件、Hash索引文件长度固定以便使用内存映射机制进行文件的读写操作。RocketMQ组织文件以文件的起始偏移量来命名文件，这样根据偏移量能快速定位到真实的物理文件。RocketMQ基于内存映射文件机制提供了同步刷盘与异步刷盘两种机制，异步刷盘是指在消息存储时先追加到内存映射文件，然后启动专门的刷盘线程定时将内存中的数据刷写到磁盘。**

**Commitlog，消息存储文件，RocketMQ为了保证消息发送的高吞吐量，采用单一文件存储所有主题的消息，保证消息存储是完全的顺序写，但这样给文件读取同样带来了不便，为此RocketMQ为了方便消息消费构建了消息消费队列文件，基于主题与队列进行组织，同时RocketMQ为消息实现了Hash索引，可以为消息设置索引键，根据索引能够快速从Commitog文件中检索消息。 **

**当消息到达Commitlog文件后，会通过ReputMessageService线程接近实时地将消息转发给消息消费队列文件与索引文件。为了安全起见，RocketMQ引入abort文件，记录Broker的停机是正常关闭还是异常关闭，在重启Broker时为了保证Commitlog文件、消息消费队列文件与Hash索引文件的正确性，分别采取不同的策略来恢复文件。**

**RocketMQ不会永久存储消息文件、消息消费队列文件，而是启用文件过期机制并在磁盘空间不足或默认在凌晨4点删除过期文件，文件默认保存72小时并且在删除文件时并不会判断该消息文件上的消息是否被消费。**

# 消息发送存储流程 #

**消息存储入口：org.apache.rocketmq.store.DefaultMessageStore\#putMessage。**

### Step1 ###

**如果当前Broker停止工作或Broker为SLAVE角色或当前Rocket不支持写入则拒绝消息写入；如果消息主题长度超过256个字符、消息属性长度超过65536个字符将拒绝该消息写入。**

### **Step2** ###

**如果消息的延迟级别大于0，将消息的原主题名称与原消息队列ID存入消息属性中，用延迟消息主题SCHEDULE\_TOPIC、消息队列ID更新原先消息的主题与队列，这是并发消息消费重试关键的一步。**

### Step3 ###

**获取当前可以写入的Commitlog文件。**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzM3NTk4MDEx_size_16_color_FFFFFF_t_70][]

**Commitlog文件存储目录为$\{ROCKET\_HOME\}/store/commitlog目录，每一个文件默认1G，一个文件写满后再创建另外一个，以该文件中第一个偏移量为文件名，偏移量小于20位用0补齐。**

### Step4 ###

**在写入CommitLog之前，先申请putMessageLock，也就是将消息存储到CommitLog文件中是串行的。**

### **Step5** ###

**设置消息的存储时间，如果mappedFile为空，表明$\{ROCKET\_HOME\}/store/commitlog目录下不存在任何文件，说明本次消息是第一次消息发送，用偏移量0创建第一个commit文件，文件为00000000000000000000，如果文件创建失败，抛出CREATE\_MAPEDFILE\_FAILED，很有可能是磁盘空间不足或权限不够。**

// Here settings are stored timestamp, in order to ensure an orderly
                // global
                msg.setStoreTimestamp(beginLockTimestamp);
    
                if (null == mappedFile || mappedFile.isFull()) {
                    mappedFile = this.mappedFileQueue.getLastMappedFile(0); // Mark: NewFile may be cause noise
                }
                if (null == mappedFile) {
                    log.error("create mapped file1 error, topic: " + msg.getTopic() + " clientAddr: " + msg.getBornHostString());
                    beginTimeInLock = 0;
                    return new PutMessageResult(PutMessageStatus.CREATE_MAPEDFILE_FAILED, null);
                }

### **Step6** ###

**将消息追加到MappedFile中。首先先获取MappedFile当前写指针，如果currentPos大于或等于文件大小则表明文件已写满，抛出AppendMessageStatus.UNKNOWN\_ERROR。如果currentPos小于文件大小，通过slice（）方法创建一个与MappedFile的共享内存区，并设置position为当前指针。**

result = mappedFile.appendMessages(messageExtBatch, this.appendMessageCallback);
    
        public AppendMessageResult appendMessages(final MessageExtBatch messageExtBatch, final AppendMessageCallback cb) {
            return appendMessagesInner(messageExtBatch, cb);
        }
    
        public AppendMessageResult appendMessagesInner(final MessageExt messageExt, final AppendMessageCallback cb) {
            assert messageExt != null;
            assert cb != null;
    
            int currentPos = this.wrotePosition.get();
    
            if (currentPos < this.fileSize) {
                ByteBuffer byteBuffer = writeBuffer != null ? writeBuffer.slice() : this.mappedByteBuffer.slice();
                byteBuffer.position(currentPos);
                AppendMessageResult result;
                if (messageExt instanceof MessageExtBrokerInner) {
                    result = cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos, (MessageExtBrokerInner) messageExt);
                } else if (messageExt instanceof MessageExtBatch) {
                    result = cb.doAppend(this.getFileFromOffset(), byteBuffer, this.fileSize - currentPos, (MessageExtBatch) messageExt);
                } else {
                    return new AppendMessageResult(AppendMessageStatus.UNKNOWN_ERROR);
                }
                this.wrotePosition.addAndGet(result.getWroteBytes());
                this.storeTimestamp = result.getStoreTimestamp();
                return result;
            }
            log.error("MappedFile.appendMessage return null, wrotePosition: {} fileSize: {}", currentPos, this.fileSize);
            return new AppendMessageResult(AppendMessageStatus.UNKNOWN_ERROR);
        }

### Step7 ###

**创建全局唯一消息ID。**

public AppendMessageResult doAppend(final long fileFromOffset, final ByteBuffer byteBuffer, final int maxBlank,
                final MessageExtBrokerInner msgInner) {
                // STORETIMESTAMP + STOREHOSTADDRESS + OFFSET <br>
    
                // PHY OFFSET
                long wroteOffset = fileFromOffset + byteBuffer.position();
    
                int sysflag = msgInner.getSysFlag();
    
                int bornHostLength = (sysflag & MessageSysFlag.BORNHOST_V6_FLAG) == 0 ? 4 + 4 : 16 + 4;
                int storeHostLength = (sysflag & MessageSysFlag.STOREHOSTADDRESS_V6_FLAG) == 0 ? 4 + 4 : 16 + 4;
                ByteBuffer bornHostHolder = ByteBuffer.allocate(bornHostLength);
                ByteBuffer storeHostHolder = ByteBuffer.allocate(storeHostLength);
    
                this.resetByteBuffer(storeHostHolder, storeHostLength);
                String msgId;
                if ((sysflag & MessageSysFlag.STOREHOSTADDRESS_V6_FLAG) == 0) {
                    msgId = MessageDecoder.createMessageId(this.msgIdMemory, msgInner.getStoreHostBytes(storeHostHolder), wroteOffset);
                } else {
                    msgId = MessageDecoder.createMessageId(this.msgIdV6Memory, msgInner.getStoreHostBytes(storeHostHolder), wroteOffset);
                }
    
                // Record ConsumeQueue information
                keyBuilder.setLength(0);
                keyBuilder.append(msgInner.getTopic());
                keyBuilder.append('-');
                keyBuilder.append(msgInner.getQueueId());
                String key = keyBuilder.toString();
                Long queueOffset = CommitLog.this.topicQueueTable.get(key);
                if (null == queueOffset) {
                    queueOffset = 0L;
                    CommitLog.this.topicQueueTable.put(key, queueOffset);
                }
    
                // Transaction messages that require special handling
                final int tranType = MessageSysFlag.getTransactionValue(msgInner.getSysFlag());
                switch (tranType) {
                    // Prepared and Rollback message is not consumed, will not enter the
                    // consumer queuec
                    case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
                    case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
                        queueOffset = 0L;
                        break;
                    case MessageSysFlag.TRANSACTION_NOT_TYPE:
                    case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
                    default:
                        break;
                }
    
                /**
                 * Serialize message
                 */
                final byte[] propertiesData =
                    msgInner.getPropertiesString() == null ? null : msgInner.getPropertiesString().getBytes(MessageDecoder.CHARSET_UTF8);
    
                final int propertiesLength = propertiesData == null ? 0 : propertiesData.length;
    
                if (propertiesLength > Short.MAX_VALUE) {
                    log.warn("putMessage message properties length too long. length={}", propertiesData.length);
                    return new AppendMessageResult(AppendMessageStatus.PROPERTIES_SIZE_EXCEEDED);
                }
    
                final byte[] topicData = msgInner.getTopic().getBytes(MessageDecoder.CHARSET_UTF8);
                final int topicLength = topicData.length;
    
                final int bodyLength = msgInner.getBody() == null ? 0 : msgInner.getBody().length;
    
                final int msgLen = calMsgLength(msgInner.getSysFlag(), bodyLength, topicLength, propertiesLength);
    
                // Exceeds the maximum message
                if (msgLen > this.maxMessageSize) {
                    CommitLog.log.warn("message size exceeded, msg total size: " + msgLen + ", msg body size: " + bodyLength
                        + ", maxMessageSize: " + this.maxMessageSize);
                    return new AppendMessageResult(AppendMessageStatus.MESSAGE_SIZE_EXCEEDED);
                }
    
                // Determines whether there is sufficient free space
                if ((msgLen + END_FILE_MIN_BLANK_LENGTH) > maxBlank) {
                    this.resetByteBuffer(this.msgStoreItemMemory, maxBlank);
                    // 1 TOTALSIZE
                    this.msgStoreItemMemory.putInt(maxBlank);
                    // 2 MAGICCODE
                    this.msgStoreItemMemory.putInt(CommitLog.BLANK_MAGIC_CODE);
                    // 3 The remaining space may be any value
                    // Here the length of the specially set maxBlank
                    final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
                    byteBuffer.put(this.msgStoreItemMemory.array(), 0, maxBlank);
                    return new AppendMessageResult(AppendMessageStatus.END_OF_FILE, wroteOffset, maxBlank, msgId, msgInner.getStoreTimestamp(),
                        queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
                }
    
                // Initialization of storage space
                this.resetByteBuffer(msgStoreItemMemory, msgLen);
                // 1 TOTALSIZE
                this.msgStoreItemMemory.putInt(msgLen);
                // 2 MAGICCODE
                this.msgStoreItemMemory.putInt(CommitLog.MESSAGE_MAGIC_CODE);
                // 3 BODYCRC
                this.msgStoreItemMemory.putInt(msgInner.getBodyCRC());
                // 4 QUEUEID
                this.msgStoreItemMemory.putInt(msgInner.getQueueId());
                // 5 FLAG
                this.msgStoreItemMemory.putInt(msgInner.getFlag());
                // 6 QUEUEOFFSET
                this.msgStoreItemMemory.putLong(queueOffset);
                // 7 PHYSICALOFFSET
                this.msgStoreItemMemory.putLong(fileFromOffset + byteBuffer.position());
                // 8 SYSFLAG
                this.msgStoreItemMemory.putInt(msgInner.getSysFlag());
                // 9 BORNTIMESTAMP
                this.msgStoreItemMemory.putLong(msgInner.getBornTimestamp());
                // 10 BORNHOST
                this.resetByteBuffer(bornHostHolder, bornHostLength);
                this.msgStoreItemMemory.put(msgInner.getBornHostBytes(bornHostHolder));
                // 11 STORETIMESTAMP
                this.msgStoreItemMemory.putLong(msgInner.getStoreTimestamp());
                // 12 STOREHOSTADDRESS
                this.resetByteBuffer(storeHostHolder, storeHostLength);
                this.msgStoreItemMemory.put(msgInner.getStoreHostBytes(storeHostHolder));
                // 13 RECONSUMETIMES
                this.msgStoreItemMemory.putInt(msgInner.getReconsumeTimes());
                // 14 Prepared Transaction Offset
                this.msgStoreItemMemory.putLong(msgInner.getPreparedTransactionOffset());
                // 15 BODY
                this.msgStoreItemMemory.putInt(bodyLength);
                if (bodyLength > 0)
                    this.msgStoreItemMemory.put(msgInner.getBody());
                // 16 TOPIC
                this.msgStoreItemMemory.put((byte) topicLength);
                this.msgStoreItemMemory.put(topicData);
                // 17 PROPERTIES
                this.msgStoreItemMemory.putShort((short) propertiesLength);
                if (propertiesLength > 0)
                    this.msgStoreItemMemory.put(propertiesData);
    
                final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
                // Write messages to the queue buffer
                byteBuffer.put(this.msgStoreItemMemory.array(), 0, msgLen);
    
                AppendMessageResult result = new AppendMessageResult(AppendMessageStatus.PUT_OK, wroteOffset, msgLen, msgId,
                    msgInner.getStoreTimestamp(), queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
    
                switch (tranType) {
                    case MessageSysFlag.TRANSACTION_PREPARED_TYPE:
                    case MessageSysFlag.TRANSACTION_ROLLBACK_TYPE:
                        break;
                    case MessageSysFlag.TRANSACTION_NOT_TYPE:
                    case MessageSysFlag.TRANSACTION_COMMIT_TYPE:
                        // The next update ConsumeQueue information
                        CommitLog.this.topicQueueTable.put(key, ++queueOffset);
                        break;
                    default:
                        break;
                }
                return result;
            }
    
    
    
                String msgId;
                if ((sysflag & MessageSysFlag.STOREHOSTADDRESS_V6_FLAG) == 0) {
                    msgId = MessageDecoder.createMessageId(this.msgIdMemory, msgInner.getStoreHostBytes(storeHostHolder), wroteOffset);
                } else {
                    msgId = MessageDecoder.createMessageId(this.msgIdV6Memory, msgInner.getStoreHostBytes(storeHostHolder), wroteOffset);
                }

**为了消息ID可读性，返回给应用程序的msgId为字符类型，可以通过UtilAll. bytes2string方法将msgId字节数组转换成字符串，通过UtilAll.string2bytes方法将msgId字符串还原成16个字节的字节数组，从而根据提取消息偏移量，可以快速通过msgId找到消息内容。**

### **Step8** ###

**获取该消息在消息队列的偏移量。CommitLog中保存了当前所有消息队列的当前待写入偏移量。**

// Record ConsumeQueue information
                keyBuilder.setLength(0);
                keyBuilder.append(msgInner.getTopic());
                keyBuilder.append('-');
                keyBuilder.append(msgInner.getQueueId());
                String key = keyBuilder.toString();
                Long queueOffset = CommitLog.this.topicQueueTable.get(key);
                if (null == queueOffset) {
                    queueOffset = 0L;
                    CommitLog.this.topicQueueTable.put(key, queueOffset);
                }

### Step9  ###

**根据消息体的长度、主题的长度、属性的长度结合消息存储格式计算消息的总长度。**

protected static int calMsgLength(int sysFlag, int bodyLength, int topicLength, int propertiesLength) {
            int bornhostLength = (sysFlag & MessageSysFlag.BORNHOST_V6_FLAG) == 0 ? 8 : 20;
            int storehostAddressLength = (sysFlag & MessageSysFlag.STOREHOSTADDRESS_V6_FLAG) == 0 ? 8 : 20;
            final int msgLen = 4 //TOTALSIZE
                + 4 //MAGICCODE
                + 4 //BODYCRC
                + 4 //QUEUEID
                + 4 //FLAG
                + 8 //QUEUEOFFSET
                + 8 //PHYSICALOFFSET
                + 4 //SYSFLAG
                + 8 //BORNTIMESTAMP
                + bornhostLength //BORNHOST
                + 8 //STORETIMESTAMP
                + storehostAddressLength //STOREHOSTADDRESS
                + 4 //RECONSUMETIMES
                + 8 //Prepared Transaction Offset
                + 4 + (bodyLength > 0 ? bodyLength : 0) //BODY
                + 1 + topicLength //TOPIC
                + 2 + (propertiesLength > 0 ? propertiesLength : 0) //propertiesLength
                + 0;
            return msgLen;
        }

### Step10 ###

**如果消息长度+END\_FILE\_MIN\_BLANK\_LENGTH大于CommitLog文件的空闲空间，则返回AppendMessageStatus.END\_OF\_FILE, Broker会重新创建一个新的CommitLog文件来存储该消息。从这里可以看出，每个CommitLog文件最少会空闲8个字节，高4字节存储当前文件剩余空间，低4字节存储魔数：CommitLog.BLANK\_MAGIC\_CODE。**

// Determines whether there is sufficient free space
                if ((msgLen + END_FILE_MIN_BLANK_LENGTH) > maxBlank) {
                    this.resetByteBuffer(this.msgStoreItemMemory, maxBlank);
                    // 1 TOTALSIZE
                    this.msgStoreItemMemory.putInt(maxBlank);
                    // 2 MAGICCODE
                    this.msgStoreItemMemory.putInt(CommitLog.BLANK_MAGIC_CODE);
                    // 3 The remaining space may be any value
                    // Here the length of the specially set maxBlank
                    final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
                    byteBuffer.put(this.msgStoreItemMemory.array(), 0, maxBlank);
                    return new AppendMessageResult(AppendMessageStatus.END_OF_FILE, wroteOffset, maxBlank, msgId, msgInner.getStoreTimestamp(),
                            queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);
                }

### Step11 ###

**将消息内容存储到ByteBuffer中，然后创建AppendMessageResult。**

final long beginTimeMills = CommitLog.this.defaultMessageStore.now();
                // Write messages to the queue buffer
                byteBuffer.put(this.msgStoreItemMemory.array(), 0, msgLen);
    
                AppendMessageResult result = new AppendMessageResult(AppendMessageStatus.PUT_OK, wroteOffset, msgLen, msgId,
                        msgInner.getStoreTimestamp(), queueOffset, CommitLog.this.defaultMessageStore.now() - beginTimeMills);

### Step12  ###

**更新消息队列逻辑偏移量。处理完消息追加逻辑后将释放putMessageLock锁。**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzM3NTk4MDEx_size_16_color_FFFFFF_t_70 1][]

### Step13 ###

**DefaultAppendMessageCallback\#doAppend只是将消息追加在内存中，需要根据是同步刷盘还是异步刷盘方式，将内存中的数据持久化到磁盘。**

# **MappedFileQueue映射文件队列** #

**MappedFileQueue是MappedFile的管理容器，MappedFileQueue是对存储目录的封装，例如CommitLog文件的存储路径$\{ROCKET\_HOME\}/store/commitlog/，该目录下会存在多个内存映射文件（MappedFile）。MappedFile是RocketMQ内存映射文件的具体实现。**

**MappedFile的核心属性。**

*  **int OS\_PAGE\_SIZE：操作系统每页大小，默认4k。**
 *  **AtomicLongTOTAL\_MAPPED\_VIRTUAL\_MEMORY：当前JVM实例中Mapped-File虚拟内存。**
 *  **AtomicInteger TOTAL\_MAPPED\_FILES：当前JVM实例中MappedFile对象个数。**
 *  **AtomicInteger wrotePosition：当前该文件的写指针，从0开始（内存映射文件中的写指针）。**
 *  **AtomicInteger committedPosition：当前文件的提交指针，如果开启transientStore-PoolEnable，则数据会存储在TransientStorePool中，然后提交到内存映射ByteBuffer中，再刷写到磁盘。**
 *  **AtomicInteger flushedPosition：刷写到磁盘指针，该指针之前的数据持久化到磁盘中。**
 *  **int fileSize：文件大小。**
 *  **FileChannel fileChannel：文件通道。**
 *  **ByteBuffer writeBuffer：堆内存ByteBuffer，如果不为空，数据首先将存储在该Buffer中，然后提交到MappedFile对应的内存映射文件Buffer。transientStorePoolEnable为true时不为空。**
 *  **TransientStorePool transientStorePool：堆内存池，transientStorePoolEnable为true时启用。**
 *  **String fileName：文件名称。**
 *  **long fileFromOffset：该文件的初始偏移量。**
 *  **File file：物理文件。**
 *  **MappedByteBuffer mappedByteBuffer：物理文件对应的内存映射Buffer。**
 *  **volatile long storeTimestamp = 0：文件最后一次内容写入时间。**
 *  **boolean firstCreateInQueue：是否是MappedFileQueue队列中第一个文件。**

private void init(final String fileName, final int fileSize) throws IOException {
            this.fileName = fileName;
            this.fileSize = fileSize;
            this.file = new File(fileName);
            this.fileFromOffset = Long.parseLong(this.file.getName());
            boolean ok = false;
    
            ensureDirOK(this.file.getParent());
    
            try {
                this.fileChannel = new RandomAccessFile(this.file, "rw").getChannel();
                this.mappedByteBuffer = this.fileChannel.map(MapMode.READ_WRITE, 0, fileSize);
                TOTAL_MAPPED_VIRTUAL_MEMORY.addAndGet(fileSize);
                TOTAL_MAPPED_FILES.incrementAndGet();
                ok = true;
            } catch (FileNotFoundException e) {
                log.error("Failed to create file " + this.fileName, e);
                throw e;
            } catch (IOException e) {
                log.error("Failed to map file " + this.fileName, e);
                throw e;
            } finally {
                if (!ok && this.fileChannel != null) {
                    this.fileChannel.close();
                }
            }
        }

**初始化fileFromOffset为文件名，也就是文件名代表该文件的起始偏移量，通过RandomAccessFile创建读写文件通道，并将文件内容使用NIO的内存映射Buffer将文件映射到内存中。**

# TransientStorePool #

**TransientStorePool：短暂的存储池。RocketMQ单独创建一个MappedByteBuffer内存缓存池，用来临时存储数据，数据先写入该内存映射中，然后由commit线程定时将数据从该内存复制到与目的物理文件对应的内存映射中。RokcetMQ引入该机制主要的原因是提供一种内存锁定，将当前堆外内存一直锁定在内存中，避免被进程将内存交换到磁盘。**

**TransientStorePool的核心属性。**

*  **int poolSize:avaliableBuffers个数，可通过在broker中配置文件中设置transient-StorePoolSize，默认为5。**
 *  **int fileSize：每个ByteBuffer大小，默认为mapedFileSizeCommitLog，表明Tran s-ientStorePool为commitlog文件服务。**
 *  **Deque<ByteBuffer>availableBuffers:ByteBuffer容器，双端队列。**

/**
         * It's a heavy init method.
         */
        public void init() {
            for (int i = 0; i < poolSize; i++) {
                ByteBuffer byteBuffer = ByteBuffer.allocateDirect(fileSize);
    
                final long address = ((DirectBuffer) byteBuffer).address();
                Pointer pointer = new Pointer(address);
                LibC.INSTANCE.mlock(pointer, new NativeLong(fileSize));
    
                availableBuffers.offer(byteBuffer);
            }
        }

** 创建poolSize个堆外内存，并利用com.sun.jna.Library类库将该批内存锁定，避免被置换到交换区，提高存储性能。**

**参考《RocketMQ技术内幕：RocketMQ架构设计与实现原理》**

[RocketMQ]: /images/20221023/64cfab492016445fb18c9681e4c5e130.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzM3NTk4MDEx_size_16_color_FFFFFF_t_70]: /images/20221023/825aefd76cb046f2b627017d3f291299.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzM3NTk4MDEx_size_16_color_FFFFFF_t_70 1]: /images/20221023/566318c1b08c439d8d5b2df81e2c67da.png