SaltStack之lamt架构状态文件(下)

逃离我推掉我的手 2022-12-01 01:19 134阅读 0赞

### 备份 ###

*   *  备份：http主配置文件
     *  备份：minion配置文件
     *  运行结果

[上篇部署lamt][lamt]

## 备份：http主配置文件 ##

[root@zyy180 files]# cat httpd.conf 
    #
    # This is the main Apache HTTP server configuration file.  It contains the
    # configuration directives that give the server its instructions.
    # See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
    # In particular, see 
    # <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
    # for a discussion of each configuration directive.
    #
    # Do NOT simply read the instructions in here without understanding
    # what they do.  They're here only as hints or reminders.  If you are unsure
    # consult the online docs. You have been warned.  
    #
    # Configuration and logfile names: If the filenames you specify for many
    # of the server's control files begin with "/" (or "drive:/" for Win32), the
    # server will use that explicit path.  If the filenames do *not* begin
    # with "/", the value of ServerRoot is prepended -- so "logs/access_log"
    # with ServerRoot set to "/usr/local/apache2" will be interpreted by the
    # server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log" 
    # will be interpreted as '/logs/access_log'.
    
    #
    # ServerRoot: The top of the directory tree under which the server's
    # configuration, error, and log files are kept.
    #
    # Do not add a slash at the end of the directory path.  If you point
    # ServerRoot at a non-local disk, be sure to specify a local disk on the
    # Mutex directive, if file-based mutexes are used.  If you wish to share the
    # same ServerRoot for multiple httpd daemons, you will need to change at
    # least PidFile.
    #
    ServerRoot "/usr/local/apache"
    
    #
    # Mutex: Allows you to set the mutex mechanism and mutex file directory
    # for individual mutexes, or change the global defaults
    #
    # Uncomment and change the directory if mutexes are file-based and the default
    # mutex file directory is not on a local disk or is not appropriate for some
    # other reason.
    #
    # Mutex default:logs
    
    #
    # Listen: Allows you to bind Apache to specific IP addresses and/or
    # ports, instead of the default. See also the <VirtualHost>
    # directive.
    #
    # Change this to Listen on specific IP addresses as shown below to 
    # prevent Apache from glomming onto all bound IP addresses.
    #
    #Listen 12.34.56.78:80
    #Listen 80
    
    #
    # Dynamic Shared Object (DSO) Support
    #
    # To be able to use the functionality of a module which was built as a DSO you
    # have to place corresponding `LoadModule' lines at this location so the
    # directives contained in it are actually available _before_ they are used.
    # Statically compiled modules (those listed by `httpd -l') do not need
    # to be loaded here.
    #
    # Example:
    # LoadModule foo_module modules/mod_foo.so
    #
    #LoadModule mpm_event_module modules/mod_mpm_event.so
    LoadModule mpm_prefork_module modules/mod_mpm_prefork.so
    #LoadModule mpm_worker_module modules/mod_mpm_worker.so
    LoadModule authn_file_module modules/mod_authn_file.so
    #LoadModule authn_dbm_module modules/mod_authn_dbm.so
    #LoadModule authn_anon_module modules/mod_authn_anon.so
    #LoadModule authn_dbd_module modules/mod_authn_dbd.so
    #LoadModule authn_socache_module modules/mod_authn_socache.so
    LoadModule authn_core_module modules/mod_authn_core.so
    LoadModule authz_host_module modules/mod_authz_host.so
    LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
    LoadModule authz_user_module modules/mod_authz_user.so
    #LoadModule authz_dbm_module modules/mod_authz_dbm.so
    #LoadModule authz_owner_module modules/mod_authz_owner.so
    #LoadModule authz_dbd_module modules/mod_authz_dbd.so
    LoadModule authz_core_module modules/mod_authz_core.so
    LoadModule access_compat_module modules/mod_access_compat.so
    LoadModule auth_basic_module modules/mod_auth_basic.so
    #LoadModule auth_form_module modules/mod_auth_form.so
    #LoadModule auth_digest_module modules/mod_auth_digest.so
    #LoadModule allowmethods_module modules/mod_allowmethods.so
    #LoadModule file_cache_module modules/mod_file_cache.so
    #LoadModule cache_module modules/mod_cache.so
    #LoadModule cache_disk_module modules/mod_cache_disk.so
    #LoadModule cache_socache_module modules/mod_cache_socache.so
    #LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
    #LoadModule socache_dbm_module modules/mod_socache_dbm.so
    #LoadModule socache_memcache_module modules/mod_socache_memcache.so
    #LoadModule socache_redis_module modules/mod_socache_redis.so
    #LoadModule watchdog_module modules/mod_watchdog.so
    #LoadModule macro_module modules/mod_macro.so
    #LoadModule dbd_module modules/mod_dbd.so
    #LoadModule dumpio_module modules/mod_dumpio.so
    #LoadModule buffer_module modules/mod_buffer.so
    #LoadModule ratelimit_module modules/mod_ratelimit.so
    LoadModule reqtimeout_module modules/mod_reqtimeout.so
    #LoadModule ext_filter_module modules/mod_ext_filter.so
    #LoadModule request_module modules/mod_request.so
    #LoadModule include_module modules/mod_include.so
    LoadModule filter_module modules/mod_filter.so
    #LoadModule substitute_module modules/mod_substitute.so
    #LoadModule sed_module modules/mod_sed.so
    #LoadModule deflate_module modules/mod_deflate.so
    LoadModule mime_module modules/mod_mime.so
    LoadModule log_config_module modules/mod_log_config.so
    #LoadModule log_debug_module modules/mod_log_debug.so
    #LoadModule logio_module modules/mod_logio.so
    LoadModule env_module modules/mod_env.so
    #LoadModule expires_module modules/mod_expires.so
    LoadModule headers_module modules/mod_headers.so
    #LoadModule unique_id_module modules/mod_unique_id.so
    LoadModule setenvif_module modules/mod_setenvif.so
    LoadModule version_module modules/mod_version.so
    #LoadModule remoteip_module modules/mod_remoteip.so
    LoadModule proxy_module modules/mod_proxy.so
    #LoadModule proxy_connect_module modules/mod_proxy_connect.so
    #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
    LoadModule proxy_http_module modules/mod_proxy_http.so
    #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
    #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
    #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
    #LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
    #LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
    #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
    #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
    #LoadModule proxy_express_module modules/mod_proxy_express.so
    #LoadModule proxy_hcheck_module modules/mod_proxy_hcheck.so
    #LoadModule session_module modules/mod_session.so
    #LoadModule session_cookie_module modules/mod_session_cookie.so
    #LoadModule session_dbd_module modules/mod_session_dbd.so
    #LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
    #LoadModule ssl_module modules/mod_ssl.so
    #LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
    #LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
    #LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
    #LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
    LoadModule unixd_module modules/mod_unixd.so
    #LoadModule dav_module modules/mod_dav.so
    LoadModule status_module modules/mod_status.so
    LoadModule autoindex_module modules/mod_autoindex.so
    #LoadModule info_module modules/mod_info.so
    <IfModule !mpm_prefork_module>
            #LoadModule cgid_module modules/mod_cgid.so
    </IfModule>
    <IfModule mpm_prefork_module>
            #LoadModule cgi_module modules/mod_cgi.so
    </IfModule>
    #LoadModule dav_fs_module modules/mod_dav_fs.so
    #LoadModule vhost_alias_module modules/mod_vhost_alias.so
    #LoadModule negotiation_module modules/mod_negotiation.so
    LoadModule dir_module modules/mod_dir.so
    #LoadModule actions_module modules/mod_actions.so
    #LoadModule speling_module modules/mod_speling.so
    #LoadModule userdir_module modules/mod_userdir.so
    LoadModule alias_module modules/mod_alias.so
    #LoadModule rewrite_module modules/mod_rewrite.so
    
    <IfModule unixd_module>
    #
    # If you wish httpd to run as a different user or group, you must run
    # httpd as root initially and it will switch.  
    #
    # User/Group: The name (or #number) of the user/group to run httpd as.
    # It is usually good practice to create a dedicated user and group for
    # running httpd, as with most system services.
    #
    User daemon
    Group daemon
    
    </IfModule>
    
    # 'Main' server configuration
    #
    # The directives in this section set up the values used by the 'main'
    # server, which responds to any requests that aren't handled by a
    # <VirtualHost> definition.  These values also provide defaults for
    # any <VirtualHost> containers you may define later in the file.
    #
    # All of these directives may appear inside <VirtualHost> containers,
    # in which case these default settings will be overridden for the
    # virtual host being defined.
    #
    
    #
    # ServerAdmin: Your address, where problems with the server should be
    # e-mailed.  This address appears on some server-generated pages, such
    # as error documents.  e.g. admin@your-domain.com
    #
    ServerAdmin you@example.com
    
    #
    # ServerName gives the name and port that the server uses to identify itself.
    # This can often be determined automatically, but we recommend you specify
    # it explicitly to prevent problems during startup.
    #
    # If your host doesn't have a registered DNS name, enter its IP address here.
    #
    #ServerName www.example.com:80
    
    #
    # Deny access to the entirety of your server's filesystem. You must
    # explicitly permit access to web content directories in other 
    # <Directory> blocks below.
    #
    <Directory />
        AllowOverride none
        Require all denied
    </Directory>
    
    #
    # Note that from this point forward you must specifically allow
    # particular features to be enabled - so if something's not working as
    # you might expect, make sure that you have specifically enabled it
    # below.
    #
    
    #
    # DocumentRoot: The directory out of which you will serve your
    # documents. By default, all requests are taken from this directory, but
    # symbolic links and aliases may be used to point to other locations.
    #
    DocumentRoot "/usr/local/apache/htdocs"
    <Directory "/usr/local/apache/htdocs">
        #
        # Possible values for the Options directive are "None", "All",
        # or any combination of:
        #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
        #
        # Note that "MultiViews" must be named *explicitly* --- "Options All"
        # doesn't give it to you.
        #
        # The Options directive is both complicated and important.  Please see
        # http://httpd.apache.org/docs/2.4/mod/core.html#options
        # for more information.
        #
        Options Indexes FollowSymLinks
    
        #
        # AllowOverride controls what directives may be placed in .htaccess files.
        # It can be "All", "None", or any combination of the keywords:
        #   AllowOverride FileInfo AuthConfig Limit
        #
        AllowOverride None
    
        #
        # Controls who can get stuff from this server.
        #
        Require all granted
    </Directory>
    
    #
    # DirectoryIndex: sets the file that Apache will serve if a directory
    # is requested.
    #
    <IfModule dir_module>
        DirectoryIndex index.html
    </IfModule>
    
    #
    # The following lines prevent .htaccess and .htpasswd files from being 
    # viewed by Web clients. 
    #
    <Files ".ht*">
        Require all denied
    </Files>
    
    #
    # ErrorLog: The location of the error log file.
    # If you do not specify an ErrorLog directive within a <VirtualHost>
    # container, error messages relating to that virtual host will be
    # logged here.  If you *do* define an error logfile for a <VirtualHost>
    # container, that host's errors will be logged there and not here.
    #
    ErrorLog "logs/error_log"
    
    #
    # LogLevel: Control the number of messages logged to the error_log.
    # Possible values include: debug, info, notice, warn, error, crit,
    # alert, emerg.
    #
    LogLevel warn
    
    <IfModule log_config_module>
        #
        # The following directives define some format nicknames for use with
        # a CustomLog directive (see below).
        #
        LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
        LogFormat "%h %l %u %t \"%r\" %>s %b" common
    
        <IfModule logio_module>
          # You need to enable mod_logio.c to use %I and %O
          LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
        </IfModule>
        #
        # The location and format of the access logfile (Common Logfile Format).
        # If you do not define any access logfiles within a <VirtualHost>
        # container, they will be logged here.  Contrariwise, if you *do*
        # define per-<VirtualHost> access logfiles, transactions will be
        # logged therein and *not* in this file.
        #
        CustomLog "logs/access_log" common
    
        #
        # If you prefer a logfile with access, agent, and referer information
        # (Combined Logfile Format) you can use the following directive.
        #
        #CustomLog "logs/access_log" combined
    </IfModule>
    
    <IfModule alias_module>
        #
        # Redirect: Allows you to tell clients about documents that used to 
        # exist in your server's namespace, but do not anymore. The client 
        # will make a new request for the document at its new location.
        # Example:
        # Redirect permanent /foo http://www.example.com/bar
    
        #
        # Alias: Maps web paths into filesystem paths and is used to
        # access content that does not live under the DocumentRoot.
        # Example:
        # Alias /webpath /full/filesystem/path
        #
        # If you include a trailing / on /webpath then the server will
        # require it to be present in the URL.  You will also likely
        # need to provide a <Directory> section to allow access to
        # the filesystem path.
    
        #
        # ScriptAlias: This controls which directories contain server scripts. 
        # ScriptAliases are essentially the same as Aliases, except that
        # documents in the target directory are treated as applications and
        # run by the server when requested rather than as documents sent to the
        # client.  The same rules about trailing "/" apply to ScriptAlias
        # directives as to Alias.
        #
        ScriptAlias /cgi-bin/ "/usr/local/apache/cgi-bin/"
    
    </IfModule>
    
    <IfModule cgid_module>
        #
        # ScriptSock: On threaded servers, designate the path to the UNIX
        # socket used to communicate with the CGI daemon of mod_cgid.
        #
        #Scriptsock cgisock
    </IfModule>
    
    #
    # "/usr/local/apache/cgi-bin" should be changed to whatever your ScriptAliased
    # CGI directory exists, if you have that configured.
    #
    <Directory "/usr/local/apache/cgi-bin">
        AllowOverride None
        Options None
        Require all granted
    </Directory>
    
    <IfModule headers_module>
        #
        # Avoid passing HTTP_PROXY environment to CGI's on this or any proxied
        # backend servers which have lingering "httpoxy" defects.
        # 'Proxy' request header is undefined by the IETF, not listed by IANA
        #
        RequestHeader unset Proxy early
    </IfModule>
    
    <IfModule mime_module>
        #
        # TypesConfig points to the file containing the list of mappings from
        # filename extension to MIME-type.
        #
        TypesConfig /etc/httpd24/mime.types
    
        #
        # AddType allows you to add to or override the MIME configuration
        # file specified in TypesConfig for specific file types.
        #
        #AddType application/x-gzip .tgz
        #
        # AddEncoding allows you to have certain browsers uncompress
        # information on the fly. Note: Not all browsers support this.
        #
        #AddEncoding x-compress .Z
        #AddEncoding x-gzip .gz .tgz
        #
        # If the AddEncoding directives above are commented-out, then you
        # probably should define those extensions to indicate media types:
        #
        AddType application/x-compress .Z
        AddType application/x-gzip .gz .tgz
    
        #
        # AddHandler allows you to map certain file extensions to "handlers":
        # actions unrelated to filetype. These can be either built into the server
        # or added with the Action directive (see below)
        #
        # To use CGI scripts outside of ScriptAliased directories:
        # (You will also need to add "ExecCGI" to the "Options" directive.)
        #
        #AddHandler cgi-script .cgi
    
        # For type maps (negotiated resources):
        #AddHandler type-map var
    
        #
        # Filters allow you to process content before it is sent to the client.
        #
        # To parse .shtml files for server-side includes (SSI):
        # (You will also need to add "Includes" to the "Options" directive.)
        #
        #AddType text/html .shtml
        #AddOutputFilter INCLUDES .shtml
    </IfModule>
    
    #
    # The mod_mime_magic module allows the server to use various hints from the
    # contents of the file itself to determine its type.  The MIMEMagicFile
    # directive tells the module where the hint definitions are located.
    #
    #MIMEMagicFile /etc/httpd24/magic
    
    #
    # Customizable error responses come in three flavors:
    # 1) plain text 2) local redirects 3) external redirects
    #
    # Some examples:
    #ErrorDocument 500 "The server made a boo boo."
    #ErrorDocument 404 /missing.html
    #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
    #ErrorDocument 402 http://www.example.com/subscription_info.html
    #
    
    #
    # MaxRanges: Maximum number of Ranges in a request before
    # returning the entire resource, or one of the special
    # values 'default', 'none' or 'unlimited'.
    # Default setting is to accept 200 Ranges.
    #MaxRanges unlimited
    
    #
    # EnableMMAP and EnableSendfile: On systems that support it, 
    # memory-mapping or the sendfile syscall may be used to deliver
    # files.  This usually improves server performance, but must
    # be turned off when serving from networked-mounted 
    # filesystems or if support for these functions is otherwise
    # broken on your system.
    # Defaults: EnableMMAP On, EnableSendfile Off
    #
    #EnableMMAP off
    #EnableSendfile on
    
    # Supplemental configuration
    #
    # The configuration files in the /etc/httpd24/extra/ directory can be 
    # included to add extra features or to modify the default configuration of 
    # the server, or you may simply copy their contents here and change as 
    # necessary.
    
    # Server-pool management (MPM specific)
    #Include /etc/httpd24/extra/httpd-mpm.conf
    
    # Multi-language error messages
    #Include /etc/httpd24/extra/httpd-multilang-errordoc.conf
    
    # Fancy directory listings
    #Include /etc/httpd24/extra/httpd-autoindex.conf
    
    # Language settings
    #Include /etc/httpd24/extra/httpd-languages.conf
    
    # User home directories
    #Include /etc/httpd24/extra/httpd-userdir.conf
    
    # Real-time info on requests and configuration
    #Include /etc/httpd24/extra/httpd-info.conf
    
    # Virtual hosts
    #Include /etc/httpd24/extra/httpd-vhosts.conf
    Include /etc/httpd24/project/*.conf
    # Local access to the Apache HTTP Server Manual
    #Include /etc/httpd24/extra/httpd-manual.conf
    
    # Distributed authoring and versioning (WebDAV)
    #Include /etc/httpd24/extra/httpd-dav.conf
    
    # Various default settings
    #Include /etc/httpd24/extra/httpd-default.conf
    
    # Configure mod_proxy_html to understand HTML4/XHTML1
    <IfModule proxy_html_module>
    Include /etc/httpd24/extra/proxy-html.conf
    </IfModule>
    
    # Secure (SSL/TLS) connections
    #Include /etc/httpd24/extra/httpd-ssl.conf
    #
    # Note: The following must must be present to support
    #       starting without SSL on platforms with no /dev/random equivalent
    #       but a statically compiled-in mod_ssl.
    #
    <IfModule ssl_module>
    SSLRandomSeed startup builtin
    SSLRandomSeed connect builtin
    </IfModule>

## 备份：minion配置文件 ##

[root@zyy180 files]# cat minion 
    ##### Primary configuration settings #####
    ##########################################
    # This configuration file is used to manage the behavior of the Salt Minion.
    # With the exception of the location of the Salt Master Server, values that are
    # commented out but have an empty line after the comment are defaults that need
    # not be set in the config. If there is no blank line after the comment, the
    # value is presented as an example and is not the default.
    
    # Per default the minion will automatically include all config files
    # from minion.d/*.conf (minion.d is a directory in the same directory
    # as the main minion config file).
    #default_include: minion.d/*.conf
    
    # Set the location of the salt master server. If the master server cannot be
    # resolved, then the minion will fail to start.
    #master: salt
    master: 192.168.30.150 
    
    # Set http proxy information for the minion when doing requests
    #proxy_host:
    #proxy_port:
    #proxy_username:
    #proxy_password:
    
    # List of hosts to bypass HTTP proxy. This key does nothing unless proxy_host etc is
    # configured, it does not support any kind of wildcards.
    #no_proxy: []
    
    # If multiple masters are specified in the 'master' setting, the default behavior
    # is to always try to connect to them in the order they are listed. If random_master
    # is set to True, the order will be randomized upon Minion startup instead. This can
    # be helpful in distributing the load of many minions executing salt-call requests,
    # for example, from a cron job. If only one master is listed, this setting is ignored
    # and a warning will be logged.
    #random_master: False
    
    # NOTE: Deprecated in Salt 2019.2.0. Use 'random_master' instead.
    #master_shuffle: False
    
    # Minions can connect to multiple masters simultaneously (all masters
    # are "hot"), or can be configured to failover if a master becomes
    # unavailable.  Multiple hot masters are configured by setting this
    # value to "str".  Failover masters can be requested by setting
    # to "failover".  MAKE SURE TO SET master_alive_interval if you are
    # using failover.
    # Setting master_type to 'disable' let's you have a running minion (with engines and
    # beacons) without a master connection
    # master_type: str
    
    # Poll interval in seconds for checking if the master is still there.  Only
    # respected if master_type above is "failover". To disable the interval entirely,
    # set the value to -1. (This may be necessary on machines which have high numbers
    # of TCP connections, such as load balancers.)
    # master_alive_interval: 30
    
    # If the minion is in multi-master mode and the master_type configuration option
    # is set to "failover", this setting can be set to "True" to force the minion
    # to fail back to the first master in the list if the first master is back online.
    #master_failback: False
    
    # If the minion is in multi-master mode, the "master_type" configuration is set to
    # "failover", and the "master_failback" option is enabled, the master failback
    # interval can be set to ping the top master with this interval, in seconds.
    #master_failback_interval: 0
    
    # Set whether the minion should connect to the master via IPv6:
    #ipv6: False
    
    # Set the number of seconds to wait before attempting to resolve
    # the master hostname if name resolution fails. Defaults to 30 seconds.
    # Set to zero if the minion should shutdown and not retry.
    # retry_dns: 30
    
    # Set the number of times to attempt to resolve
    # the master hostname if name resolution fails. Defaults to None,
    # which will attempt the resolution indefinitely.
    # retry_dns_count: 3
    
    # Set the port used by the master reply and authentication server.
    #master_port: 4506
    
    # The user to run salt.
    #user: root
    
    # The user to run salt remote execution commands as via sudo. If this option is
    # enabled then sudo will be used to change the active user executing the remote
    # command. If enabled the user will need to be allowed access via the sudoers
    # file for the user that the salt minion is configured to run as. The most
    # common option would be to use the root user. If this option is set the user
    # option should also be set to a non-root user. If migrating from a root minion
    # to a non root minion the minion cache should be cleared and the minion pki
    # directory will need to be changed to the ownership of the new user.
    #sudo_user: root
    
    # Specify the location of the daemon process ID file.
    #pidfile: /var/run/salt-minion.pid
    
    # The root directory prepended to these options: pki_dir, cachedir, log_file,
    # sock_dir, pidfile.
    #root_dir: /
    
    # The path to the minion's configuration file.
    #conf_file: /etc/salt/minion
    
    # The directory to store the pki information in
    #pki_dir: /etc/salt/pki/minion
    
    # Explicitly declare the id for this minion to use, if left commented the id
    # will be the hostname as returned by the python call: socket.getfqdn()
    # Since salt uses detached ids it is possible to run multiple minions on the
    # same machine but with different ids, this can be useful for salt compute
    # clusters.
    #id:
    # Cache the minion id to a file when the minion's id is not statically defined
    # in the minion config. Defaults to "True". This setting prevents potential
    # problems when automatic minion id resolution changes, which can cause the
    # minion to lose connection with the master. To turn off minion id caching,
    # set this config to ``False``.
    #minion_id_caching: True
    
    # Append a domain to a hostname in the event that it does not exist.  This is
    # useful for systems where socket.getfqdn() does not actually result in a
    # FQDN (for instance, Solaris).
    #append_domain:
    
    # Custom static grains for this minion can be specified here and used in SLS
    # files just like all other grains. This example sets 4 custom grains, with
    # the 'roles' grain having two values that can be matched against.
    #grains:
    #  roles:
    #    - webserver
    #    - memcache
    #  deployment: datacenter4
    #  cabinet: 13
    #  cab_u: 14-15
    #
    # Where cache data goes.
    # This data may contain sensitive data and should be protected accordingly.
    #cachedir: /var/cache/salt/minion
    
    # Append minion_id to these directories.  Helps with
    # multiple proxies and minions running on the same machine.
    # Allowed elements in the list: pki_dir, cachedir, extension_modules
    # Normally not needed unless running several proxies and/or minions on the same machine
    # Defaults to ['cachedir'] for proxies, [] (empty list) for regular minions
    #append_minionid_config_dirs:
    
    # Verify and set permissions on configuration directories at startup.
    #verify_env: True
    
    # The minion can locally cache the return data from jobs sent to it, this
    # can be a good way to keep track of jobs the minion has executed
    # (on the minion side). By default this feature is disabled, to enable, set
    # cache_jobs to True.
    #cache_jobs: False
    
    # Set the directory used to hold unix sockets.
    #sock_dir: /var/run/salt/minion
    
    # The minion can take a while to start up when lspci and/or dmidecode is used
    # to populate the grains for the minion. Set this to False if you do not need
    # GPU hardware grains for your minion.
    # enable_gpu_grains: True
    
    # Set the default outputter used by the salt-call command. The default is
    # "nested".
    #output: nested
    
    # To set a list of additional directories to search for salt outputters, set the
    # outputter_dirs option.
    #outputter_dirs: []
    
    # By default output is colored. To disable colored output, set the color value
    # to False.
    #color: True
    
    # Do not strip off the colored output from nested results and state outputs
    # (true by default).
    # strip_colors: False
    
    # Backup files that are replaced by file.managed and file.recurse under
    # 'cachedir'/file_backup relative to their original location and appended
    # with a timestamp. The only valid setting is "minion". Disabled by default.
    #
    # Alternatively this can be specified for each file in state files:
    # /etc/ssh/sshd_config:
    #   file.managed:
    #     - source: salt://ssh/sshd_config
    #     - backup: minion
    #
    #backup_mode: minion
    
    # When waiting for a master to accept the minion's public key, salt will
    # continuously attempt to reconnect until successful. This is the time, in
    # seconds, between those reconnection attempts.
    #acceptance_wait_time: 10
    
    # If this is nonzero, the time between reconnection attempts will increase by
    # acceptance_wait_time seconds per iteration, up to this maximum. If this is
    # set to zero, the time between reconnection attempts will stay constant.
    #acceptance_wait_time_max: 0
    
    # If the master rejects the minion's public key, retry instead of exiting.
    # Rejected keys will be handled the same as waiting on acceptance.
    #rejected_retry: False
    
    # When the master key changes, the minion will try to re-auth itself to receive
    # the new master key. In larger environments this can cause a SYN flood on the
    # master because all minions try to re-auth immediately. To prevent this and
    # have a minion wait for a random amount of time, use this optional parameter.
    # The wait-time will be a random number of seconds between 0 and the defined value.
    #random_reauth_delay: 60
    
    
    # To avoid overloading a master when many minions startup at once, a randomized
    # delay may be set to tell the minions to wait before connecting to the master.
    # This value is the number of seconds to choose from for a random number. For
    # example, setting this value to 60 will choose a random number of seconds to delay
    # on startup between zero seconds and sixty seconds. Setting to '0' will disable
    # this feature.
    #random_startup_delay: 0
    
    # When waiting for a master to accept the minion's public key, salt will
    # continuously attempt to reconnect until successful. This is the timeout value,
    # in seconds, for each individual attempt. After this timeout expires, the minion
    # will wait for acceptance_wait_time seconds before trying again. Unless your master
    # is under unusually heavy load, this should be left at the default.
    #auth_timeout: 60
    
    # Number of consecutive SaltReqTimeoutError that are acceptable when trying to
    # authenticate.
    #auth_tries: 7
    
    # The number of attempts to connect to a master before giving up.
    # Set this to -1 for unlimited attempts. This allows for a master to have
    # downtime and the minion to reconnect to it later when it comes back up.
    # In 'failover' mode, it is the number of attempts for each set of masters.
    # In this mode, it will cycle through the list of masters for each attempt.
    #
    # This is different than auth_tries because auth_tries attempts to
    # retry auth attempts with a single master. auth_tries is under the
    # assumption that you can connect to the master but not gain
    # authorization from it. master_tries will still cycle through all
    # the masters in a given try, so it is appropriate if you expect
    # occasional downtime from the master(s).
    #master_tries: 1
    
    # If authentication fails due to SaltReqTimeoutError during a ping_interval,
    # cause sub minion process to restart.
    #auth_safemode: False
    
    # Ping Master to ensure connection is alive (minutes).
    #ping_interval: 0
    
    # To auto recover minions if master changes IP address (DDNS)
    #    auth_tries: 10
    #    auth_safemode: False
    #    ping_interval: 2
    #
    # Minions won't know master is missing until a ping fails. After the ping fail,
    # the minion will attempt authentication and likely fails out and cause a restart.
    # When the minion restarts it will resolve the masters IP and attempt to reconnect.
    
    # If you don't have any problems with syn-floods, don't bother with the
    # three recon_* settings described below, just leave the defaults!
    #
    # The ZeroMQ pull-socket that binds to the masters publishing interface tries
    # to reconnect immediately, if the socket is disconnected (for example if
    # the master processes are restarted). In large setups this will have all
    # minions reconnect immediately which might flood the master (the ZeroMQ-default
    # is usually a 100ms delay). To prevent this, these three recon_* settings
    # can be used.
    # recon_default: the interval in milliseconds that the socket should wait before
    #                trying to reconnect to the master (1000ms = 1 second)
    #
    # recon_max: the maximum time a socket should wait. each interval the time to wait
    #            is calculated by doubling the previous time. if recon_max is reached,
    #            it starts again at recon_default. Short example:
    #
    #            reconnect 1: the socket will wait 'recon_default' milliseconds
    #            reconnect 2: 'recon_default' * 2
    #            reconnect 3: ('recon_default' * 2) * 2
    #            reconnect 4: value from previous interval * 2
    #            reconnect 5: value from previous interval * 2
    #            reconnect x: if value >= recon_max, it starts again with recon_default
    #
    # recon_randomize: generate a random wait time on minion start. The wait time will
    #                  be a random value between recon_default and recon_default +
    #                  recon_max. Having all minions reconnect with the same recon_default
    #                  and recon_max value kind of defeats the purpose of being able to
    #                  change these settings. If all minions have the same values and your
    #                  setup is quite large (several thousand minions), they will still
    #                  flood the master. The desired behavior is to have timeframe within
    #                  all minions try to reconnect.
    #
    # Example on how to use these settings. The goal: have all minions reconnect within a
    # 60 second timeframe on a disconnect.
    # recon_default: 1000
    # recon_max: 59000
    # recon_randomize: True
    #
    # Each minion will have a randomized reconnect value between 'recon_default'
    # and 'recon_default + recon_max', which in this example means between 1000ms
    # 60000ms (or between 1 and 60 seconds). The generated random-value will be
    # doubled after each attempt to reconnect. Lets say the generated random
    # value is 11 seconds (or 11000ms).
    # reconnect 1: wait 11 seconds
    # reconnect 2: wait 22 seconds
    # reconnect 3: wait 33 seconds
    # reconnect 4: wait 44 seconds
    # reconnect 5: wait 55 seconds
    # reconnect 6: wait time is bigger than 60 seconds (recon_default + recon_max)
    # reconnect 7: wait 11 seconds
    # reconnect 8: wait 22 seconds
    # reconnect 9: wait 33 seconds
    # reconnect x: etc.
    #
    # In a setup with ~6000 thousand hosts these settings would average the reconnects
    # to about 100 per second and all hosts would be reconnected within 60 seconds.
    # recon_default: 100
    # recon_max: 5000
    # recon_randomize: False
    #
    #
    # The loop_interval sets how long in seconds the minion will wait between
    # evaluating the scheduler and running cleanup tasks.  This defaults to 1
    # second on the minion scheduler.
    #loop_interval: 1
    
    # Some installations choose to start all job returns in a cache or a returner
    # and forgo sending the results back to a master. In this workflow, jobs
    # are most often executed with --async from the Salt CLI and then results
    # are evaluated by examining job caches on the minions or any configured returners.
    # WARNING: Setting this to False will **disable** returns back to the master.
    #pub_ret: True
    
    
    # The grains can be merged, instead of overridden, using this option.
    # This allows custom grains to defined different subvalues of a dictionary
    # grain. By default this feature is disabled, to enable set grains_deep_merge
    # to ``True``.
    #grains_deep_merge: False
    
    # The grains_refresh_every setting allows for a minion to periodically check
    # its grains to see if they have changed and, if so, to inform the master
    # of the new grains. This operation is moderately expensive, therefore
    # care should be taken not to set this value too low.
    #
    # Note: This value is expressed in __minutes__!
    #
    # A value of 10 minutes is a reasonable default.
    #
    # If the value is set to zero, this check is disabled.
    #grains_refresh_every: 1
    
    # Cache grains on the minion. Default is False.
    #grains_cache: False
    
    # Cache rendered pillar data on the minion. Default is False.
    # This may cause 'cachedir'/pillar to contain sensitive data that should be
    # protected accordingly.
    #minion_pillar_cache: False
    
    # Grains cache expiration, in seconds. If the cache file is older than this
    # number of seconds then the grains cache will be dumped and fully re-populated
    # with fresh data. Defaults to 5 minutes. Will have no effect if 'grains_cache'
    # is not enabled.
    # grains_cache_expiration: 300
    
    # Determines whether or not the salt minion should run scheduled mine updates.
    # Defaults to "True". Set to "False" to disable the scheduled mine updates
    # (this essentially just does not add the mine update function to the minion's
    # scheduler).
    #mine_enabled: True
    
    # Determines whether or not scheduled mine updates should be accompanied by a job
    # return for the job cache. Defaults to "False". Set to "True" to include job
    # returns in the job cache for mine updates.
    #mine_return_job: False
    
    # Example functions that can be run via the mine facility
    # NO mine functions are established by default.
    # Note these can be defined in the minion's pillar as well.
    #mine_functions:
    #  test.ping: []
    #  network.ip_addrs:
    #    interface: eth0
    #    cidr: '10.0.0.0/8'
    
    # The number of minutes between mine updates.
    #mine_interval: 60
    
    # Windows platforms lack posix IPC and must rely on slower TCP based inter-
    # process communications.  ipc_mode is set to 'tcp' on such systems.
    #ipc_mode: ipc
    
    # Overwrite the default tcp ports used by the minion when ipc_mode is set to 'tcp'
    #tcp_pub_port: 4510
    #tcp_pull_port: 4511
    
    # Passing very large events can cause the minion to consume large amounts of
    # memory. This value tunes the maximum size of a message allowed onto the
    # minion event bus. The value is expressed in bytes.
    #max_event_size: 1048576
    
    # When a minion starts up it sends a notification on the event bus with a tag
    # that looks like this: `salt/minion/<minion_id>/start`. For historical reasons
    # the minion also sends a similar event with an event tag like this:
    # `minion_start`. This duplication can cause a lot of clutter on the event bus
    # when there are many minions. Set `enable_legacy_startup_events: False` in the
    # minion config to ensure only the `salt/minion/<minion_id>/start` events are
    # sent. Beginning with the `Sodium` Salt release this option will default to
    # `False`
    #enable_legacy_startup_events: True
    
    # To detect failed master(s) and fire events on connect/disconnect, set
    # master_alive_interval to the number of seconds to poll the masters for
    # connection events.
    #
    #master_alive_interval: 30
    
    # The minion can include configuration from other files. To enable this,
    # pass a list of paths to this option. The paths can be either relative or
    # absolute; if relative, they are considered to be relative to the directory
    # the main minion configuration file lives in (this file). Paths can make use
    # of shell-style globbing. If no files are matched by a path passed to this
    # option then the minion will log a warning message.
    #
    # Include a config file from some other path:
    # include: /etc/salt/extra_config
    #
    # Include config from several files and directories:
    #include:
    #  - /etc/salt/extra_config
    #  - /etc/roles/webserver
    
    # The syndic minion can verify that it is talking to the correct master via the
    # key fingerprint of the higher-level master with the "syndic_finger" config.
    #syndic_finger: ''
    #
    #
    #
    #####   Minion module management     #####
    ##########################################
    # Disable specific modules. This allows the admin to limit the level of
    # access the master has to the minion.  The default here is the empty list,
    # below is an example of how this needs to be formatted in the config file
    #disable_modules:
    #  - cmdmod
    #  - test
    #disable_returners: []
    
    # This is the reverse of disable_modules.  The default, like disable_modules, is the empty list,
    # but if this option is set to *anything* then *only* those modules will load.
    # Note that this is a very large hammer and it can be quite difficult to keep the minion working
    # the way you think it should since Salt uses many modules internally itself.  At a bare minimum
    # you need the following enabled or else the minion won't start.
    #whitelist_modules:
    #  - cmdmod
    #  - test
    #  - config
    
    # Modules can be loaded from arbitrary paths. This enables the easy deployment
    # of third party modules. Modules for returners and minions can be loaded.
    # Specify a list of extra directories to search for minion modules and
    # returners. These paths must be fully qualified!
    #module_dirs: []
    #returner_dirs: []
    #states_dirs: []
    #render_dirs: []
    #utils_dirs: []
    #
    # A module provider can be statically overwritten or extended for the minion
    # via the providers option, in this case the default module will be
    # overwritten by the specified module. In this example the pkg module will
    # be provided by the yumpkg5 module instead of the system default.
    #providers:
    #  pkg: yumpkg5
    #
    # Enable Cython modules searching and loading. (Default: False)
    #cython_enable: False
    #
    # Specify a max size (in bytes) for modules on import. This feature is currently
    # only supported on *nix operating systems and requires psutil.
    # modules_max_memory: -1
    
    
    #####    State Management Settings    #####
    ###########################################
    # The default renderer to use in SLS files. This is configured as a
    # pipe-delimited expression. For example, jinja|yaml will first run jinja
    # templating on the SLS file, and then load the result as YAML. This syntax is
    # documented in further depth at the following URL:
    #
    # https://docs.saltstack.com/en/latest/ref/renderers/#composing-renderers
    #
    # NOTE: The "shebang" prefix (e.g. "#!jinja|yaml") described in the
    # documentation linked above is for use in an SLS file to override the default
    # renderer, it should not be used when configuring the renderer here.
    #
    #renderer: jinja|yaml
    #
    # The failhard option tells the minions to stop immediately after the first
    # failure detected in the state execution. Defaults to False.
    #failhard: False
    #
    # Reload the modules prior to a highstate run.
    #autoload_dynamic_modules: True
    #
    # clean_dynamic_modules keeps the dynamic modules on the minion in sync with
    # the dynamic modules on the master, this means that if a dynamic module is
    # not on the master it will be deleted from the minion. By default, this is
    # enabled and can be disabled by changing this value to False.
    #clean_dynamic_modules: True
    #
    # Normally, the minion is not isolated to any single environment on the master
    # when running states, but the environment can be isolated on the minion side
    # by statically setting it. Remember that the recommended way to manage
    # environments is to isolate via the top file.
    #environment: None
    #
    # Isolates the pillar environment on the minion side. This functions the same
    # as the environment setting, but for pillar instead of states.
    #pillarenv: None
    #
    # Set this option to True to force the pillarenv to be the same as the
    # effective saltenv when running states. Note that if pillarenv is specified,
    # this option will be ignored.
    #pillarenv_from_saltenv: False
    #
    # Set this option to 'True' to force a 'KeyError' to be raised whenever an
    # attempt to retrieve a named value from pillar fails. When this option is set
    # to 'False', the failed attempt returns an empty string. Default is 'False'.
    #pillar_raise_on_missing: False
    #
    # If using the local file directory, then the state top file name needs to be
    # defined, by default this is top.sls.
    #state_top: top.sls
    #
    # Run states when the minion daemon starts. To enable, set startup_states to:
    # 'highstate' -- Execute state.highstate
    # 'sls' -- Read in the sls_list option and execute the named sls files
    # 'top' -- Read top_file option and execute based on that file on the Master
    #startup_states: ''
    #
    # List of states to run when the minion starts up if startup_states is 'sls':
    #sls_list:
    #  - edit.vim
    #  - hyper
    #
    # List of grains to pass in start event when minion starts up:
    #start_event_grains:
    #  - machine_id
    #  - uuid
    #
    # Top file to execute if startup_states is 'top':
    #top_file: ''
    
    # Automatically aggregate all states that have support for mod_aggregate by
    # setting to True. Or pass a list of state module names to automatically
    # aggregate just those types.
    #
    # state_aggregate:
    #   - pkg
    #
    #state_aggregate: False
    
    #####     File Directory Settings    #####
    ##########################################
    # The Salt Minion can redirect all file server operations to a local directory,
    # this allows for the same state tree that is on the master to be used if
    # copied completely onto the minion. This is a literal copy of the settings on
    # the master but used to reference a local directory on the minion.
    
    # Set the file client. The client defaults to looking on the master server for
    # files, but can be directed to look at the local file directory setting
    # defined below by setting it to "local". Setting a local file_client runs the
    # minion in masterless mode.
    #file_client: remote
    
    # The file directory works on environments passed to the minion, each environment
    # can have multiple root directories, the subdirectories in the multiple file
    # roots cannot match, otherwise the downloaded files will not be able to be
    # reliably ensured. A base environment is required to house the top file.
    # Example:
    # file_roots:
    #   base:
    #     - /srv/salt/
    #   dev:
    #     - /srv/salt/dev/services
    #     - /srv/salt/dev/states
    #   prod:
    #     - /srv/salt/prod/services
    #     - /srv/salt/prod/states
    #
    #file_roots:
    #  base:
    #    - /srv/salt
    
    # Uncomment the line below if you do not want the file_server to follow
    # symlinks when walking the filesystem tree. This is set to True
    # by default. Currently this only applies to the default roots
    # fileserver_backend.
    #fileserver_followsymlinks: False
    #
    # Uncomment the line below if you do not want symlinks to be
    # treated as the files they are pointing to. By default this is set to
    # False. By uncommenting the line below, any detected symlink while listing
    # files on the Master will not be returned to the Minion.
    #fileserver_ignoresymlinks: True
    #
    # By default, the Salt fileserver recurses fully into all defined environments
    # to attempt to find files. To limit this behavior so that the fileserver only
    # traverses directories with SLS files and special Salt directories like _modules,
    # enable the option below. This might be useful for installations where a file root
    # has a very large number of files and performance is negatively impacted. Default
    # is False.
    #fileserver_limit_traversal: False
    
    # The hash_type is the hash to use when discovering the hash of a file on
    # the local fileserver. The default is sha256, but md5, sha1, sha224, sha384
    # and sha512 are also supported.
    #
    # WARNING: While md5 and sha1 are also supported, do not use them due to the
    # high chance of possible collisions and thus security breach.
    #
    # Warning: Prior to changing this value, the minion should be stopped and all
    # Salt caches should be cleared.
    #hash_type: sha256
    
    # The Salt pillar is searched for locally if file_client is set to local. If
    # this is the case, and pillar data is defined, then the pillar_roots need to
    # also be configured on the minion:
    #pillar_roots:
    #  base:
    #    - /srv/pillar
    
    # Set a hard-limit on the size of the files that can be pushed to the master.
    # It will be interpreted as megabytes. Default: 100
    #file_recv_max_size: 100
    #
    #
    ######        Security settings       #####
    ###########################################
    # Enable "open mode", this mode still maintains encryption, but turns off
    # authentication, this is only intended for highly secure environments or for
    # the situation where your keys end up in a bad state. If you run in open mode
    # you do so at your own risk!
    #open_mode: False
    
    # The size of key that should be generated when creating new keys.
    #keysize: 2048
    
    # Enable permissive access to the salt keys.  This allows you to run the
    # master or minion as root, but have a non-root group be given access to
    # your pki_dir.  To make the access explicit, root must belong to the group
    # you've given access to. This is potentially quite insecure.
    #permissive_pki_access: False
    
    # The state_verbose and state_output settings can be used to change the way
    # state system data is printed to the display. By default all data is printed.
    # The state_verbose setting can be set to True or False, when set to False
    # all data that has a result of True and no changes will be suppressed.
    #state_verbose: True
    
    # The state_output setting controls which results will be output full multi line
    # full, terse - each state will be full/terse
    # mixed - only states with errors will be full
    # changes - states with changes and errors will be full
    # full_id, mixed_id, changes_id and terse_id are also allowed;
    # when set, the state ID will be used as name in the output
    #state_output: full
    
    # The state_output_diff setting changes whether or not the output from
    # successful states is returned. Useful when even the terse output of these
    # states is cluttering the logs. Set it to True to ignore them.
    #state_output_diff: False
    
    # The state_output_profile setting changes whether profile information
    # will be shown for each state run.
    #state_output_profile: True
    
    # Fingerprint of the master public key to validate the identity of your Salt master
    # before the initial key exchange. The master fingerprint can be found by running
    # "salt-key -f master.pub" on the Salt master.
    #master_finger: ''
    
    # Use TLS/SSL encrypted connection between master and minion.
    # Can be set to a dictionary containing keyword arguments corresponding to Python's
    # 'ssl.wrap_socket' method.
    # Default is None.
    #ssl:
    #    keyfile: <path_to_keyfile>
    #    certfile: <path_to_certfile>
    #    ssl_version: PROTOCOL_TLSv1_2
    
    # Grains to be sent to the master on authentication to check if the minion's key
    # will be accepted automatically. Needs to be configured on the master.
    #autosign_grains:
    #  - uuid
    #  - server_id
    
    
    ######        Reactor Settings        #####
    ###########################################
    # Define a salt reactor. See https://docs.saltstack.com/en/latest/topics/reactor/
    #reactor: []
    
    #Set the TTL for the cache of the reactor configuration.
    #reactor_refresh_interval: 60
    
    #Configure the number of workers for the runner/wheel in the reactor.
    #reactor_worker_threads: 10
    
    #Define the queue size for workers in the reactor.
    #reactor_worker_hwm: 10000
    
    
    ######         Thread settings        #####
    ###########################################
    # Disable multiprocessing support, by default when a minion receives a
    # publication a new process is spawned and the command is executed therein.
    #
    # WARNING: Disabling multiprocessing may result in substantial slowdowns
    # when processing large pillars. See https://github.com/saltstack/salt/issues/38758
    # for a full explanation.
    #multiprocessing: True
    
    # Limit the maximum amount of processes or threads created by salt-minion.
    # This is useful to avoid resource exhaustion in case the minion receives more
    # publications than it is able to handle, as it limits the number of spawned
    # processes or threads. -1 is the default and disables the limit.
    #process_count_max: -1
    
    
    #####         Logging settings       #####
    ##########################################
    # The location of the minion log file
    # The minion log can be sent to a regular file, local path name, or network
    # location. Remote logging works best when configured to use rsyslogd(8) (e.g.:
    # ``file:///dev/log``), with rsyslogd(8) configured for network logging. The URI
    # format is: <file|udp|tcp>://<host|socketpath>:<port-if-required>/<log-facility>
    #log_file: /var/log/salt/minion
    #log_file: file:///dev/log
    #log_file: udp://loghost:10514
    #
    #log_file: /var/log/salt/minion
    #key_logfile: /var/log/salt/key
    
    # The level of messages to send to the console.
    # One of 'garbage', 'trace', 'debug', 'info', 'warning', 'error', 'critical'.
    #
    # The following log levels are considered INSECURE and may log sensitive data:
    # ['garbage', 'trace', 'debug']
    #
    # Default: 'warning'
    #log_level: warning
    
    # The level of messages to send to the log file.
    # One of 'garbage', 'trace', 'debug', info', 'warning', 'error', 'critical'.
    # If using 'log_granular_levels' this must be set to the highest desired level.
    # Default: 'warning'
    #log_level_logfile:
    
    # The date and time format used in log messages. Allowed date/time formatting
    # can be seen here: http://docs.python.org/library/time.html#time.strftime
    #log_datefmt: '%H:%M:%S'
    #log_datefmt_logfile: '%Y-%m-%d %H:%M:%S'
    
    # The format of the console logging messages. Allowed formatting options can
    # be seen here: http://docs.python.org/library/logging.html#logrecord-attributes
    #
    # Console log colors are specified by these additional formatters:
    #
    # %(colorlevel)s
    # %(colorname)s
    # %(colorprocess)s
    # %(colormsg)s
    #
    # Since it is desirable to include the surrounding brackets, '[' and ']', in
    # the coloring of the messages, these color formatters also include padding as
    # well.  Color LogRecord attributes are only available for console logging.
    #
    #log_fmt_console: '%(colorlevel)s %(colormsg)s'
    #log_fmt_console: '[%(levelname)-8s] %(message)s'
    #
    #log_fmt_logfile: '%(asctime)s,%(msecs)03d [%(name)-17s][%(levelname)-8s] %(message)s'
    
    # This can be used to control logging levels more specificically.  This
    # example sets the main salt library at the 'warning' level, but sets
    # 'salt.modules' to log at the 'debug' level:
    #   log_granular_levels:
    #     'salt': 'warning'
    #     'salt.modules': 'debug'
    #
    #log_granular_levels: {}
    
    # To diagnose issues with minions disconnecting or missing returns, ZeroMQ
    # supports the use of monitor sockets to log connection events. This
    # feature requires ZeroMQ 4.0 or higher.
    #
    # To enable ZeroMQ monitor sockets, set 'zmq_monitor' to 'True' and log at a
    # debug level or higher.
    #
    # A sample log event is as follows:
    #
    # [DEBUG   ] ZeroMQ event: {'endpoint': 'tcp://127.0.0.1:4505', 'event': 512,
    # 'value': 27, 'description': 'EVENT_DISCONNECTED'}
    #
    # All events logged will include the string 'ZeroMQ event'. A connection event
    # should be logged as the minion starts up and initially connects to the
    # master. If not, check for debug log level and that the necessary version of
    # ZeroMQ is installed.
    #
    #zmq_monitor: False
    
    # Number of times to try to authenticate with the salt master when reconnecting
    # to the master
    #tcp_authentication_retries: 5
    
    ######      Module configuration      #####
    ###########################################
    # Salt allows for modules to be passed arbitrary configuration data, any data
    # passed here in valid yaml format will be passed on to the salt minion modules
    # for use. It is STRONGLY recommended that a naming convention be used in which
    # the module name is followed by a . and then the value. Also, all top level
    # data must be applied via the yaml dict construct, some examples:
    #
    # You can specify that all modules should run in test mode:
    #test: True
    #
    # A simple value for the test module:
    #test.foo: foo
    #
    # A list for the test module:
    #test.bar: [baz,quo]
    #
    # A dict for the test module:
    #test.baz: {spam: sausage, cheese: bread}
    #
    #
    ######      Update settings          ######
    ###########################################
    # Using the features in Esky, a salt minion can both run as a frozen app and
    # be updated on the fly. These options control how the update process
    # (saltutil.update()) behaves.
    #
    # The url for finding and downloading updates. Disabled by default.
    #update_url: False
    #
    # The list of services to restart after a successful update. Empty by default.
    #update_restart_services: []
    
    
    ######      Keepalive settings        ######
    ############################################
    # ZeroMQ now includes support for configuring SO_KEEPALIVE if supported by
    # the OS. If connections between the minion and the master pass through
    # a state tracking device such as a firewall or VPN gateway, there is
    # the risk that it could tear down the connection the master and minion
    # without informing either party that their connection has been taken away.
    # Enabling TCP Keepalives prevents this from happening.
    
    # Overall state of TCP Keepalives, enable (1 or True), disable (0 or False)
    # or leave to the OS defaults (-1), on Linux, typically disabled. Default True, enabled.
    #tcp_keepalive: True
    
    # How long before the first keepalive should be sent in seconds. Default 300
    # to send the first keepalive after 5 minutes, OS default (-1) is typically 7200 seconds
    # on Linux see /proc/sys/net/ipv4/tcp_keepalive_time.
    #tcp_keepalive_idle: 300
    
    # How many lost probes are needed to consider the connection lost. Default -1
    # to use OS defaults, typically 9 on Linux, see /proc/sys/net/ipv4/tcp_keepalive_probes.
    #tcp_keepalive_cnt: -1
    
    # How often, in seconds, to send keepalives after the first one. Default -1 to
    # use OS defaults, typically 75 seconds on Linux, see
    # /proc/sys/net/ipv4/tcp_keepalive_intvl.
    #tcp_keepalive_intvl: -1
    
    
    ######   Windows Software settings    ######
    ############################################
    # Location of the repository cache file on the master:
    #win_repo_cachefile: 'salt://win/repo/winrepo.p'
    
    
    ######      Returner  settings        ######
    ############################################
    # Default Minion returners. Can be a comma delimited string or a list:
    #
    #return: mysql
    #
    #return: mysql,slack,redis
    #
    #return:
    #  - mysql
    #  - hipchat
    #  - slack
    
    
    ######    Miscellaneous  settings     ######
    ############################################
    # Default match type for filtering events tags: startswith, endswith, find, regex, fnmatch
    #event_match_type: startswith

## 运行结果 ##

192.168.30.245:
    ----------
              ID: /etc/yum.repos.d/CentOS-Base.repo
        Function: file.managed
          Result: True
         Comment: File /etc/yum.repos.d/CentOS-Base.repo is in the correct state
         Started: 16:45:07.055119
        Duration: 55.171 ms
         Changes:   
    ----------
              ID: /etc/yum.repos.d/epel.repo
        Function: file.managed
          Result: True
         Comment: File /etc/yum.repos.d/epel.repo is in the correct state
         Started: 16:45:07.110455
        Duration: 40.82 ms
         Changes:   
    ----------
              ID: /etc/yum.repos.d/epel.repo
        Function: cmd.run
            Name: yum clean all && yum makecache fast
          Result: True
         Comment: Command "yum clean all && yum makecache fast" run
         Started: 16:45:07.152010
        Duration: 22798.864 ms
         Changes:   
                  ----------
                  pid:
                      5818
                  retcode:
                      0
                  stderr:
                  stdout:
                      Loaded plugins: product-id, search-disabled-repos, subscription-manager
                      This system is not registered with an entitlement server. You can use subscription-manager to register.
                      Cleaning repos: base epel extras salt-latest updates
                      Cleaning up everything
                      Maybe you want: rm -rf /var/cache/yum, to also free up space taken by orphaned data from disabled or removed repos
                      Loaded plugins: product-id, search-disabled-repos, subscription-manager
                      This system is not registered with an entitlement server. You can use subscription-manager to register.
                      Metadata Cache Created
    ----------
              ID: init-install
        Function: pkg.installed
          Result: True
         Comment: 13 targeted packages were installed/updated.
                  The following packages were already installed: vim-minimal, openssl
         Started: 16:45:31.012816
        Duration: 184806.629 ms
         Changes:   
                  ----------
                  atk:
                      ----------
                      new:
                          2.28.1-2.el7
                      old:
                  autoconf:
                      ----------
                      new:
                          2.69-11.el7
                      old:
                  automake:
                      ----------
                      new:
                          1.13.4-3.el7
                      old:
                  avahi-libs:
                      ----------
                      new:
                          0.6.31-20.el7
                      old:
                  bzip2:
                      ----------
                      new:
                          1.0.6-13.el7
                      old:
                  cairo:
                      ----------
                      new:
                          1.15.12-4.el7
                      old:
                  cmake:
                      ----------
                      new:
                          2.8.12.2-2.el7
                      old:
                  copy-jdk-configs:
                      ----------
                      new:
                          3.3-10.el7_5
                      old:
                  cpp:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                  cups-libs:
                      ----------
                      new:
                          1:1.6.3-43.el7
                      old:
                  dbus:
                      ----------
                      new:
                          1:1.10.24-14.el7_8
                      old:
                          1:1.6.12-17.el7
                  dbus-libs:
                      ----------
                      new:
                          1:1.10.24-14.el7_8
                      old:
                          1:1.6.12-17.el7
                  dejavu-fonts-common:
                      ----------
                      new:
                          2.33-6.el7
                      old:
                  dejavu-sans-fonts:
                      ----------
                      new:
                          2.33-6.el7
                      old:
                  e2fsprogs:
                      ----------
                      new:
                          1.42.9-17.el7
                      old:
                          1.42.9-10.el7
                  e2fsprogs-libs:
                      ----------
                      new:
                          1.42.9-17.el7
                      old:
                          1.42.9-10.el7
                  expat:
                      ----------
                      new:
                          2.1.0-11.el7
                      old:
                          2.1.0-10.el7_3
                  expat-devel:
                      ----------
                      new:
                          2.1.0-11.el7
                      old:
                  fontconfig:
                      ----------
                      new:
                          2.13.0-4.3.el7
                      old:
                  fontpackages-filesystem:
                      ----------
                      new:
                          1.44-8.el7
                      old:
                  freetype:
                      ----------
                      new:
                          2.8-14.el7
                      old:
                          2.4.11-15.el7
                  fribidi:
                      ----------
                      new:
                          1.0.2-1.el7_7.1
                      old:
                  gcc:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                  gcc-c++:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                  gdk-pixbuf2:
                      ----------
                      new:
                          2.36.12-3.el7
                      old:
                  giflib:
                      ----------
                      new:
                          4.1.6-9.el7
                      old:
                  glib2:
                      ----------
                      new:
                          2.56.1-5.el7
                      old:
                          2.50.3-3.el7
                  glibc:
                      ----------
                      new:
                          2.17-307.el7.1
                      old:
                          2.17-196.el7
                  glibc-common:
                      ----------
                      new:
                          2.17-307.el7.1
                      old:
                          2.17-196.el7
                  glibc-devel:
                      ----------
                      new:
                          2.17-307.el7.1
                      old:
                  glibc-headers:
                      ----------
                      new:
                          2.17-307.el7.1
                      old:
                  graphite2:
                      ----------
                      new:
                          1.3.10-1.el7_3
                      old:
                  gtk-update-icon-cache:
                      ----------
                      new:
                          3.22.30-5.el7
                      old:
                  gtk2:
                      ----------
                      new:
                          2.24.31-1.el7
                      old:
                  harfbuzz:
                      ----------
                      new:
                          1.7.5-2.el7
                      old:
                  hicolor-icon-theme:
                      ----------
                      new:
                          0.12-7.el7
                      old:
                  jasper-libs:
                      ----------
                      new:
                          1.900.1-33.el7
                      old:
                  java-1.8.0-openjdk:
                      ----------
                      new:
                          1:1.8.0.262.b10-0.el7_8
                      old:
                  java-1.8.0-openjdk-devel:
                      ----------
                      new:
                          1:1.8.0.262.b10-0.el7_8
                      old:
                  java-1.8.0-openjdk-headless:
                      ----------
                      new:
                          1:1.8.0.262.b10-0.el7_8
                      old:
                  javapackages-tools:
                      ----------
                      new:
                          3.4.1-11.el7
                      old:
                  jbigkit-libs:
                      ----------
                      new:
                          2.0-11.el7
                      old:
                  kernel-headers:
                      ----------
                      new:
                          3.10.0-1127.18.2.el7
                      old:
                  keyutils-libs-devel:
                      ----------
                      new:
                          1.5.8-3.el7
                      old:
                  krb5-devel:
                      ----------
                      new:
                          1.15.1-46.el7
                      old:
                  krb5-libs:
                      ----------
                      new:
                          1.15.1-46.el7
                      old:
                          1.15.1-8.el7
                  libICE:
                      ----------
                      new:
                          1.0.9-9.el7
                      old:
                  libSM:
                      ----------
                      new:
                          1.2.2-2.el7
                      old:
                  libX11:
                      ----------
                      new:
                          1.6.7-2.el7
                      old:
                  libX11-common:
                      ----------
                      new:
                          1.6.7-2.el7
                      old:
                  libXau:
                      ----------
                      new:
                          1.0.8-2.1.el7
                      old:
                  libXcomposite:
                      ----------
                      new:
                          0.4.4-4.1.el7
                      old:
                  libXcursor:
                      ----------
                      new:
                          1.1.15-1.el7
                      old:
                  libXdamage:
                      ----------
                      new:
                          1.1.4-4.1.el7
                      old:
                  libXext:
                      ----------
                      new:
                          1.3.3-3.el7
                      old:
                  libXfixes:
                      ----------
                      new:
                          5.0.3-1.el7
                      old:
                  libXft:
                      ----------
                      new:
                          2.3.2-2.el7
                      old:
                  libXi:
                      ----------
                      new:
                          1.7.9-1.el7
                      old:
                  libXinerama:
                      ----------
                      new:
                          1.1.3-2.1.el7
                      old:
                  libXrandr:
                      ----------
                      new:
                          1.5.1-2.el7
                      old:
                  libXrender:
                      ----------
                      new:
                          0.9.10-1.el7
                      old:
                  libXtst:
                      ----------
                      new:
                          1.2.3-1.el7
                      old:
                  libXxf86vm:
                      ----------
                      new:
                          1.1.4-1.el7
                      old:
                  libarchive:
                      ----------
                      new:
                          3.1.2-14.el7_7
                      old:
                  libcom_err:
                      ----------
                      new:
                          1.42.9-17.el7
                      old:
                          1.42.9-10.el7
                  libcom_err-devel:
                      ----------
                      new:
                          1.42.9-17.el7
                      old:
                  libdrm:
                      ----------
                      new:
                          2.4.97-2.el7
                      old:
                          2.4.74-1.el7
                  libfontenc:
                      ----------
                      new:
                          1.1.3-3.el7
                      old:
                  libgcc:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                          4.8.5-16.el7
                  libglvnd:
                      ----------
                      new:
                          1:1.0.1-0.8.git5baa1e5.el7
                      old:
                  libglvnd-egl:
                      ----------
                      new:
                          1:1.0.1-0.8.git5baa1e5.el7
                      old:
                  libglvnd-glx:
                      ----------
                      new:
                          1:1.0.1-0.8.git5baa1e5.el7
                      old:
                  libgomp:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                          4.8.5-16.el7
                  libjpeg-turbo:
                      ----------
                      new:
                          1.2.90-8.el7
                      old:
                  libkadm5:
                      ----------
                      new:
                          1.15.1-46.el7
                      old:
                  libmpc:
                      ----------
                      new:
                          1.0.1-3.el7
                      old:
                  libpng:
                      ----------
                      new:
                          2:1.5.13-7.el7_2
                      old:
                  libselinux:
                      ----------
                      new:
                          2.5-15.el7
                      old:
                          2.5-11.el7
                  libselinux-devel:
                      ----------
                      new:
                          2.5-15.el7
                      old:
                  libselinux-python:
                      ----------
                      new:
                          2.5-15.el7
                      old:
                          2.5-11.el7
                  libselinux-utils:
                      ----------
                      new:
                          2.5-15.el7
                      old:
                          2.5-11.el7
                  libsepol:
                      ----------
                      new:
                          2.5-10.el7
                      old:
                          2.5-6.el7
                  libsepol-devel:
                      ----------
                      new:
                          2.5-10.el7
                      old:
                  libss:
                      ----------
                      new:
                          1.42.9-17.el7
                      old:
                          1.42.9-10.el7
                  libstdc++:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                          4.8.5-16.el7
                  libstdc++-devel:
                      ----------
                      new:
                          4.8.5-39.el7
                      old:
                  libthai:
                      ----------
                      new:
                          0.1.14-9.el7
                      old:
                  libtiff:
                      ----------
                      new:
                          4.0.3-32.el7
                      old:
                  libtool:
                      ----------
                      new:
                          2.4.2-22.el7_3
                      old:
                  libverto-devel:
                      ----------
                      new:
                          0.2.5-4.el7
                      old:
                  libwayland-client:
                      ----------
                      new:
                          1.15.0-1.el7
                      old:
                  libwayland-server:
                      ----------
                      new:
                          1.15.0-1.el7
                      old:
                  libxcb:
                      ----------
                      new:
                          1.13-1.el7
                      old:
                  libxshmfence:
                      ----------
                      new:
                          1.2-1.el7
                      old:
                  lksctp-tools:
                      ----------
                      new:
                          1.0.17-2.el7
                      old:
                  m4:
                      ----------
                      new:
                          1.4.16-10.el7
                      old:
                  mariadb-devel:
                      ----------
                      new:
                          1:5.5.65-1.el7
                      old:
                  mariadb-libs:
                      ----------
                      new:
                          1:5.5.65-1.el7
                      old:
                          1:5.5.56-2.el7
                  mesa-libEGL:
                      ----------
                      new:
                          18.3.4-7.el7_8.1
                      old:
                  mesa-libGL:
                      ----------
                      new:
                          18.3.4-7.el7_8.1
                      old:
                  mesa-libgbm:
                      ----------
                      new:
                          18.3.4-7.el7_8.1
                      old:
                  mesa-libglapi:
                      ----------
                      new:
                          18.3.4-7.el7_8.1
                      old:
                  mpfr:
                      ----------
                      new:
                          3.1.1-4.el7
                      old:
                  ncurses:
                      ----------
                      new:
                          5.9-14.20130511.el7_4
                      old:
                          5.9-13.20130511.el7
                  ncurses-base:
                      ----------
                      new:
                          5.9-14.20130511.el7_4
                      old:
                          5.9-13.20130511.el7
                  ncurses-devel:
                      ----------
                      new:
                          5.9-14.20130511.el7_4
                      old:
                  ncurses-libs:
                      ----------
                      new:
                          5.9-14.20130511.el7_4
                      old:
                          5.9-13.20130511.el7
                  openssl:
                      ----------
                      new:
                          1:1.0.2k-19.el7
                      old:
                          1:1.0.2k-8.el7
                  openssl-devel:
                      ----------
                      new:
                          1:1.0.2k-19.el7
                      old:
                  openssl-libs:
                      ----------
                      new:
                          1:1.0.2k-19.el7
                      old:
                          1:1.0.2k-8.el7
                  pango:
                      ----------
                      new:
                          1.42.4-4.el7_7
                      old:
                  pcre-devel:
                      ----------
                      new:
                          8.32-17.el7
                      old:
                  pcsc-lite-libs:
                      ----------
                      new:
                          1.8.8-8.el7
                      old:
                  perl:
                      ----------
                      new:
                          4:5.16.3-295.el7
                      old:
                  perl-Carp:
                      ----------
                      new:
                          1.26-244.el7
                      old:
                  perl-Data-Dumper:
                      ----------
                      new:
                          2.145-3.el7
                      old:
                  perl-Encode:
                      ----------
                      new:
                          2.51-7.el7
                      old:
                  perl-Exporter:
                      ----------
                      new:
                          5.68-3.el7
                      old:
                  perl-File-Path:
                      ----------
                      new:
                          2.09-2.el7
                      old:
                  perl-File-Temp:
                      ----------
                      new:
                          0.23.01-3.el7
                      old:
                  perl-Filter:
                      ----------
                      new:
                          1.49-3.el7
                      old:
                  perl-Getopt-Long:
                      ----------
                      new:
                          2.40-3.el7
                      old:
                  perl-HTTP-Tiny:
                      ----------
                      new:
                          0.033-3.el7
                      old:
                  perl-PathTools:
                      ----------
                      new:
                          3.40-5.el7
                      old:
                  perl-Pod-Escapes:
                      ----------
                      new:
                          1:1.04-295.el7
                      old:
                  perl-Pod-Perldoc:
                      ----------
                      new:
                          3.20-4.el7
                      old:
                  perl-Pod-Simple:
                      ----------
                      new:
                          1:3.28-4.el7
                      old:
                  perl-Pod-Usage:
                      ----------
                      new:
                          1.63-3.el7
                      old:
                  perl-Scalar-List-Utils:
                      ----------
                      new:
                          1.27-248.el7
                      old:
                  perl-Socket:
                      ----------
                      new:
                          2.010-5.el7
                      old:
                  perl-Storable:
                      ----------
                      new:
                          2.45-3.el7
                      old:
                  perl-Test-Harness:
                      ----------
                      new:
                          3.28-3.el7
                      old:
                  perl-Text-ParseWords:
                      ----------
                      new:
                          3.29-4.el7
                      old:
                  perl-Thread-Queue:
                      ----------
                      new:
                          3.02-2.el7
                      old:
                  perl-Time-HiRes:
                      ----------
                      new:
                          4:1.9725-3.el7
                      old:
                  perl-Time-Local:
                      ----------
                      new:
                          1.2300-2.el7
                      old:
                  perl-constant:
                      ----------
                      new:
                          1.27-2.el7
                      old:
                  perl-libs:
                      ----------
                      new:
                          4:5.16.3-295.el7
                      old:
                  perl-macros:
                      ----------
                      new:
                          4:5.16.3-295.el7
                      old:
                  perl-parent:
                      ----------
                      new:
                          1:0.225-244.el7
                      old:
                  perl-podlators:
                      ----------
                      new:
                          2.5.1-3.el7
                      old:
                  perl-threads:
                      ----------
                      new:
                          1.87-4.el7
                      old:
                  perl-threads-shared:
                      ----------
                      new:
                          1.43-6.el7
                      old:
                  pixman:
                      ----------
                      new:
                          0.34.0-1.el7
                      old:
                  python-javapackages:
                      ----------
                      new:
                          3.4.1-11.el7
                      old:
                  ttmkfdir:
                      ----------
                      new:
                          3.0.9-42.el7
                      old:
                  tzdata-java:
                      ----------
                      new:
                          2020a-1.el7
                      old:
                  wget:
                      ----------
                      new:
                          1.14-18.el7_6.1
                      old:
                  xorg-x11-font-utils:
                      ----------
                      new:
                          1:7.5-21.el7
                      old:
                  xorg-x11-fonts-Type1:
                      ----------
                      new:
                          7.5-9.el7
                      old:
                  zlib:
                      ----------
                      new:
                          1.2.7-18.el7
                      old:
                          1.2.7-17.el7
                  zlib-devel:
                      ----------
                      new:
                          1.2.7-18.el7
                      old:
    ----------
              ID: init-install
        Function: cmd.run
            Name: yum groups mark install "Development Tools"
          Result: True
         Comment: Command "yum groups mark install "Development Tools"" run
         Started: 16:48:35.820895
        Duration: 440.402 ms
         Changes:   
                  ----------
                  pid:
                      9106
                  retcode:
                      0
                  stderr:
                      There is no installed groups file.
                      Maybe run: yum groups mark convert (see man yum)
                  stdout:
                      Loaded plugins: product-id, search-disabled-repos, subscription-manager
                      This system is not registered with an entitlement server. You can use subscription-manager to register.
                      Marked install: Development Tools
    ----------
              ID: apache-user
        Function: user.present
            Name: apache
          Result: True
         Comment: New user apache created
         Started: 16:48:36.262730
        Duration: 58.196 ms
         Changes:   
                  ----------
                  fullname:
                  gid:
                      995
                  groups:
                      - apache
                  home:
                  homephone:
                  name:
                      apache
                  other:
                  passwd:
                      x
                  roomnumber:
                  shell:
                      /sbin/nologin
                  uid:
                      997
                  workphone:
    ----------
              ID: /usr/src/apr-1.7.0.tar.bz2
        Function: file.managed
          Result: True
         Comment: File /usr/src/apr-1.7.0.tar.bz2 updated
         Started: 16:48:36.323530
        Duration: 76.035 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/src/apr-util-1.6.1.tar.bz2
        Function: file.managed
          Result: True
         Comment: File /usr/src/apr-util-1.6.1.tar.bz2 updated
         Started: 16:48:36.399718
        Duration: 51.09 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/src/httpd-2.4.43.tar.bz2
        Function: file.managed
          Result: True
         Comment: File /usr/src/httpd-2.4.43.tar.bz2 updated
         Started: 16:48:36.451035
        Duration: 298.531 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: unpack_httpd_packages
        Function: cmd.run
            Name: cd /usr/src/ && tar xf apr-1.7.0.tar.bz2 -C /usr/local && tar xf apr-util-1.6.1.tar.bz2 -C /usr/local && tar xf httpd-2.4.43.tar.bz2 -C /usr/local && sed -i '/$RM "$cfgfile"/d' /usr/local/apr-1.7.0/configure
          Result: True
         Comment: Command "cd /usr/src/ && tar xf apr-1.7.0.tar.bz2 -C /usr/local && tar xf apr-util-1.6.1.tar.bz2 -C /usr/local && tar xf httpd-2.4.43.tar.bz2 -C /usr/local && sed -i '/$RM "$cfgfile"/d' /usr/local/apr-1.7.0/configure" run
         Started: 16:48:36.750212
        Duration: 1879.253 ms
         Changes:   
                  ----------
                  pid:
                      9184
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /tmp/apache_install.sh
        Function: file.managed
          Result: True
         Comment: File /tmp/apache_install.sh updated
         Started: 16:48:38.629687
        Duration: 18.347 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0755
    ----------
              ID: /tmp/apache_install.sh
        Function: cmd.run
            Name: /bin/bash /tmp/apache_install.sh
          Result: True
         Comment: Command "/bin/bash /tmp/apache_install.sh" run
         Started: 16:48:38.648716
        Duration: 158657.464 ms
         Changes:   
                  ----------
                  pid:
                      9225
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /usr/lib/systemd/system/httpd.service
        Function: file.managed
          Result: True
         Comment: File /usr/lib/systemd/system/httpd.service updated
         Started: 16:51:17.306671
        Duration: 27.193 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/lib/systemd/system/httpd.service
        Function: cmd.run
            Name: systemctl daemon-reload
          Result: True
         Comment: Command "systemctl daemon-reload" run
         Started: 16:51:17.334530
        Duration: 59.623 ms
         Changes:   
                  ----------
                  pid:
                      43817
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: mysql-user
        Function: user.present
            Name: mysql
          Result: True
         Comment: New user mysql created
         Started: 16:51:17.394482
        Duration: 23.319 ms
         Changes:   
                  ----------
                  fullname:
                  gid:
                      994
                  groups:
                      - mysql
                  home:
                  homephone:
                  name:
                      mysql
                  other:
                  passwd:
                      x
                  roomnumber:
                  shell:
                      /sbin/nologin
                  uid:
                      996
                  workphone:
    ----------
              ID: /usr/src/mysql-5.7.30-linux-glibc2.12-x86_64.tar.gz
        Function: file.managed
          Result: True
         Comment: File /usr/src/mysql-5.7.30-linux-glibc2.12-x86_64.tar.gz updated
         Started: 16:51:17.417996
        Duration: 19063.049 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: unpack_packages
        Function: cmd.run
            Name: cd /usr/src/ && tar xf mysql-5.7.30-linux-glibc2.12-x86_64.tar.gz -C /usr/local
          Result: True
         Comment: Command "cd /usr/src/ && tar xf mysql-5.7.30-linux-glibc2.12-x86_64.tar.gz -C /usr/local" run
         Started: 16:51:36.481786
        Duration: 32519.713 ms
         Changes:   
                  ----------
                  pid:
                      44115
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /usr/local/mysql
        Function: file.symlink
          Result: True
         Comment: Created new symlink /usr/local/mysql -> /usr/local/mysql-5.7.30-linux-glibc2.12-x86_64
         Started: 16:52:09.002379
        Duration: 9.334 ms
         Changes:   
                  ----------
                  new:
                      /usr/local/mysql
    ----------
              ID: /opt/mysql-database
        Function: file.directory
          Result: True
         Comment: Directory /opt/mysql-database updated
         Started: 16:52:09.011869
        Duration: 2009.568 ms
         Changes:   
                  ----------
                  /opt/mysql-database:
                      New Dir
    ----------
              ID: mysql-environment
        Function: cmd.run
            Name: echo "export PATH=/usr/local/mysql/bin:$PATH" > /etc/profile.d/mysql.sh
          Result: True
         Comment: Command "echo "export PATH=/usr/local/mysql/bin:$PATH" > /etc/profile.d/mysql.sh" run
         Started: 16:52:11.021805
        Duration: 8.643 ms
         Changes:   
                  ----------
                  pid:
                      44557
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /tmp/mariadb.sh
        Function: file.managed
          Result: True
         Comment: File /tmp/mariadb.sh updated
         Started: 16:52:11.030649
        Duration: 18.576 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0755
    ----------
              ID: /tmp/mariadb.sh
        Function: cmd.run
            Name: /bin/bash /tmp/mariadb.sh
          Result: True
         Comment: Command "/bin/bash /tmp/mariadb.sh" run
         Started: 16:52:11.049365
        Duration: 3746.481 ms
         Changes:   
                  ----------
                  pid:
                      44558
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /usr/lib/systemd/system/mariadb.service
        Function: file.managed
          Result: True
         Comment: File /usr/lib/systemd/system/mariadb.service updated
         Started: 16:52:14.796072
        Duration: 19.134 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/lib/systemd/system/mariadb.service
        Function: cmd.run
            Name: systemctl daemon-reload
          Result: True
         Comment: Command "systemctl daemon-reload" run
         Started: 16:52:14.815346
        Duration: 129.259 ms
         Changes:   
                  ----------
                  pid:
                      44634
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /usr/src/apache-tomcat-9.0.37.tar.gz
        Function: file.managed
          Result: True
         Comment: File /usr/src/apache-tomcat-9.0.37.tar.gz updated
         Started: 16:52:14.944817
        Duration: 315.377 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: unpack_tomcat_packages
        Function: cmd.run
            Name: cd /usr/src && tar xf apache-tomcat-9.0.37.tar.gz -C /usr/local
          Result: True
         Comment: Command "cd /usr/src && tar xf apache-tomcat-9.0.37.tar.gz -C /usr/local" run
         Started: 16:52:15.260946
        Duration: 151.207 ms
         Changes:   
                  ----------
                  pid:
                      44669
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /usr/local/tomcat
        Function: file.symlink
          Result: True
         Comment: Created new symlink /usr/local/tomcat -> /usr/local/apache-tomcat-9.0.37
         Started: 16:52:15.412491
        Duration: 1.418 ms
         Changes:   
                  ----------
                  new:
                      /usr/local/tomcat
    ----------
              ID: /usr/local/tomcat/bin/setenv.sh
        Function: file.managed
          Result: True
         Comment: File /usr/local/tomcat/bin/setenv.sh updated
         Started: 16:52:15.414518
        Duration: 16.845 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/lib/systemd/system/tomcat.service
        Function: file.managed
          Result: True
         Comment: File /usr/lib/systemd/system/tomcat.service updated
         Started: 16:52:15.431505
        Duration: 16.503 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: /usr/lib/systemd/system/tomcat.service
        Function: cmd.run
            Name: systemctl daemon-reload
          Result: True
         Comment: Command "systemctl daemon-reload" run
         Started: 16:52:15.448658
        Duration: 56.163 ms
         Changes:   
                  ----------
                  pid:
                      44672
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: /etc/httpd24/httpd.conf
        Function: file.managed
          Result: True
         Comment: File /etc/httpd24/httpd.conf updated
         Started: 16:52:15.505204
        Duration: 31.96 ms
         Changes:   
                  ----------
                  diff:
                      --- 
                      +++ 
                      @@ -49,7 +49,7 @@
                       # prevent Apache from glomming onto all bound IP addresses.
                       #
                       #Listen 12.34.56.78:80
                      -Listen 80
                      +#Listen 80
                       
                       #
                       # Dynamic Shared Object (DSO) Support
                      @@ -117,10 +117,10 @@
                       LoadModule setenvif_module modules/mod_setenvif.so
                       LoadModule version_module modules/mod_version.so
                       #LoadModule remoteip_module modules/mod_remoteip.so
                      -#LoadModule proxy_module modules/mod_proxy.so
                      +LoadModule proxy_module modules/mod_proxy.so
                       #LoadModule proxy_connect_module modules/mod_proxy_connect.so
                       #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
                      -#LoadModule proxy_http_module modules/mod_proxy_http.so
                      +LoadModule proxy_http_module modules/mod_proxy_http.so
                       #LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
                       #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
                       #LoadModule proxy_uwsgi_module modules/mod_proxy_uwsgi.so
                      @@ -297,7 +297,6 @@
                             # You need to enable mod_logio.c to use %I and %O
                             LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
                           </IfModule>
                      -
                           #
                           # The location and format of the access logfile (Common Logfile Format).
                           # If you do not define any access logfiles within a <VirtualHost>
                      @@ -484,7 +483,7 @@
                       
                       # Virtual hosts
                       #Include /etc/httpd24/extra/httpd-vhosts.conf
                      -
                      +Include /etc/httpd24/project/*.conf
                       # Local access to the Apache HTTP Server Manual
                       #Include /etc/httpd24/extra/httpd-manual.conf
                       
    ----------
              ID: /etc/httpd24/project
        Function: file.directory
          Result: True
         Comment: Directory /etc/httpd24/project updated
         Started: 16:52:15.537315
        Duration: 1.264 ms
         Changes:   
                  ----------
                  /etc/httpd24/project:
                      New Dir
    ----------
              ID: /etc/httpd24/project/lamt.conf
        Function: file.managed
          Result: True
         Comment: File /etc/httpd24/project/lamt.conf updated
         Started: 16:52:15.538695
        Duration: 23.148 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0644
    ----------
              ID: httpd-service
        Function: service.running
            Name: httpd
          Result: True
         Comment: Service httpd has been enabled, and is running
         Started: 16:52:15.562220
        Duration: 200.038 ms
         Changes:   
                  ----------
                  httpd:
                      True
    ----------
              ID: mariadb.service
        Function: service.running
            Name: mariadb
          Result: True
         Comment: Service mariadb has been enabled, and is running
         Started: 16:52:15.762451
        Duration: 644.403 ms
         Changes:   
                  ----------
                  mariadb:
                      True
    ----------
              ID: tomcat-service
        Function: service.running
            Name: tomcat
          Result: True
         Comment: Service tomcat has been enabled, and is running
         Started: 16:52:16.407149
        Duration: 236.046 ms
         Changes:   
                  ----------
                  tomcat:
                      True
    ----------
              ID: /tmp/mysql_passwd.sh
        Function: file.managed
          Result: True
         Comment: File /tmp/mysql_passwd.sh updated
         Started: 16:52:16.643395
        Duration: 36.212 ms
         Changes:   
                  ----------
                  diff:
                      New file
                  mode:
                      0755
    ----------
              ID: /tmp/mysql_passwd.sh
        Function: cmd.run
            Name: /bin/bash /tmp/mysql_passwd.sh
          Result: True
         Comment: Command "/bin/bash /tmp/mysql_passwd.sh" run
         Started: 16:52:16.679747
        Duration: 36.245 ms
         Changes:   
                  ----------
                  pid:
                      44829
                  retcode:
                      0
                  stderr:
                  stdout:
                      mysql密码为1
    
    Summary for 192.168.30.245
    -------------
    Succeeded: 38 (changed=36)
    Failed:     0
    -------------
    Total states run:     38
    Total run time:  428.582 s

[lamt]: https://blog.csdn.net/zyy130988/article/details/108214300