MegaCli的相关shell脚本

女爷i 2023-01-16 03:21 217阅读 0赞

1、cat megacli.sh

#!/bin/bash
    #--------------------------------------------------  
    #Created:2015-05-22
    #Author:jimmygong
    #Mail:jimmygong@taomee.com
    #Function:
    #Version:1.0
    #--------------------------------------------------
    function megacliaction ()
    {
        megacmd="/usr/local/sbin/MegaCli64"
        if [[ -e $megacmd ]]
        then
            critical=$(sudo $megacmd -AdpAllInfo -aALL -NoLog|awk '/Critical Disks/ {print $4}') 
            failed=$(sudo $megacmd -AdpAllInfo -aALL -NoLog|awk '/Failed Disks/ {print $4}')
            [[ -z $critical ]] || [[ -z $failed ]] && echo "Storage Capture Failure" && exit 0 
            [[ $critical -ne 0 ]] || [[ $failed -ne 0 ]] && echo "Storage Disk Failure" && exit 0 
            echo "Storage Disk Normal"
        else
            echo "MegaCli64 Problem"
            exit 1
        fi
    }
    
    megacliaction
    exit 0

2、查看raid信息

cat megacli2.sh
    #!/bin/bash
    #--------------------------------------------------  
    #Created:2015-05-22
    #Author:jimmygong
    #Mail:jimmygong@taomee.com
    #Function:
    #Version:1.0
    #--------------------------------------------------
    function diskstatus ()
    {
    echo -e "===============Raid Information==============="
    cmd="/usr/local/sbin/MegaCli64"
    raid=`$cmd -cfgdsply -aALL|grep "RAID Level"|tail -1|awk -F: '{print $1"        :"$2}'`
    disknum=`$cmd -cfgdsply -aALL|grep "Number Of Drives"|awk -F: '{print $2}'`
    onlinedisk=`$cmd -cfgdsply -aALL|grep -c "Online"`
    faileddisk=`$cmd -AdpAllInfo -aALL -NoLog|awk '/Failed Disks/ {print $4}'`
    criticaldisk=`$cmd -AdpAllInfo -aALL -NoLog|awk '/Critical Disks/ {print $4}'`
    case "$raid" in
    "RAID Level        : Primary-1, Secondary-0, RAID Level Qualifier-0")
    echo "Raid Level:1";;
    "RAID Level        : Primary-0, Secondary-0, RAID Level Qualifier-0")
    echo "Raid Level:0";;
    "RAID Level        : Primary-5, Secondary-0, RAID Level Qualifier-3")
    echo "Raid Level:5";;
    "RAID Level        : Primary-6, Secondary-0, RAID Level Qualifier-3")
    echo "Raid Level:6";;
    "RAID Level        : Primary-1, Secondary-3, RAID Level Qualifier-0")
    echo "Raid Level:10";;
    esac
    echo "Total Diak Number:$disknum"
    echo "Online Disk Number:$onlinedisk"
    echo "Failed Disk Number:$faileddisk"
    echo "Critical Disk Number:$criticaldisk"
    echo -e "===============Current Status================="
    $cmd -PDList -aALL|grep "Firmware state"
    }
    
    diskstatus
    exit 0

执行结果:

===============Raid Information===============
    Raid Level:5
    Total Diak Number:7
    Online Disk Number:7
    Failed Disk Number:0
    Critical Disk Number:0
    ===============Current Status=================
    Firmware state: Online
    Firmware state: Online
    Firmware state: Online
    Firmware state: Online
    Firmware state: Online
    Firmware state: Online
    Firmware state: Online
    Firmware state: Hotspare

参考链接 ：  
MegaCli的相关shell脚本 ：  
https://blog.51cto.com/u\_7938217/1653705