iperf 网络测试工具

深碍√TFBOYSˉ_ 2023-06-01 06:27 11阅读 0赞

一个网络速度测试工具，支持IPv4与IPv6，支持TCP、UDP、SCTP传输协议，可在Windows、Mac OS X、Linux、FreeBSD等各种平台使用，是一个简单又实用的小工具。  
常用方式举例：

S端：

iperf -s -u -i 1

![1342965-20190820143600310-678268227.png][]

C端：

iperf.exe -c 192.168.x.x -p 5001 -u -b 30m -t 10 -w 3072

![1342965-20190820152244660-1042822349.png][]

\-w 包大小

\-i 间隔

\-t 次数

\-b 带宽

\-u udp模式

\-p 指定端口

\# Linux 版本参数说明

[loki@loki-c7t1 ~]$ iperf --help |more
    Usage: iperf [-s|-c host] [options]
           iperf [-h|--help] [-v|--version]
    
    Client/Server:
      -b, --bandwidth #[kmgKMG | pps]  bandwidth to send at in bits/sec or packets per second
      -e, --enhancedreports    use enhanced reporting giving more tcp/udp and traffic information
      -f, --format    [kmgKMG]   format to report: Kbits, Mbits, KBytes, MBytes
      -i, --interval  #        seconds between periodic bandwidth reports
      -l, --len       #[kmKM]    length of buffer in bytes to read or write (Defaults: TCP=128K, v4 UDP=1470, v6 UDP=1450)
      -m, --print_mss          print TCP maximum segment size (MTU - TCP/IP header)
      -o, --output    <filename> output the report or error message to this specified file
      -p, --port      #        server port to listen on/connect to
      -u, --udp                use UDP rather than TCP
          --udp-counters-64bit use 64 bit sequence numbers with UDP
      -w, --window    #[KM]    TCP window size (socket buffer size)
      -z, --realtime           request realtime scheduler
      -B, --bind <host>[:<port>][%<dev>] bind to <host>, ip addr (including multicast address) and optional port and device
      -C, --compatibility      for use with older versions does not sent extra msgs
      -M, --mss       #        set TCP maximum segment size (MTU - 40 bytes)
      -N, --nodelay            set TCP no delay, disabling Nagle's Algorithm
      -S, --tos       #        set the socket's IP_TOS (byte) field
    
    Server specific:
      -s, --server             run in server mode
      -t, --time      #        time in seconds to listen for new connections as well as to receive traffic (default not set)
          --udp-histogram #,#  enable UDP latency histogram(s) with bin width and count, e.g. 1,1000=1(ms),1000(bins)
      -B, --bind <ip>[%<dev>]  bind to multicast address and optional device
      -H, --ssm-host <ip>      set the SSM source, use with -B for (S,G) 
      -U, --single_udp         run in single threaded UDP mode
      -D, --daemon             run the server as a daemon
      -V, --ipv6_domain        Enable IPv6 reception by setting the domain and socket to AF_INET6 (Can receive on both IPv4 and IPv6)
    
    Client specific:
      -c, --client    <host>   run in client mode, connecting to <host>
      -d, --dualtest           Do a bidirectional test simultaneously
          --ipg                set the the interpacket gap (milliseconds) for packets within an isochronous frame
          --isochronous <frames-per-second>:<mean>,<stddev> send traffic in bursts (frames - emulate video traffic)
      -n, --num       #[kmgKMG]    number of bytes to transmit (instead of -t)
      -r, --tradeoff           Do a bidirectional test individually
      -t, --time      #        time in seconds to transmit for (default 10 secs)
      -B, --bind [<ip> | <ip:port>] bind ip (and optional port) from which to source traffic
      -F, --fileinput <name>   input the data to be transmitted from a file
      -I, --stdin              input the data to be transmitted from stdin
      -L, --listenport #       port to receive bidirectional tests back on
      -P, --parallel  #        number of parallel client threads to run
      -R, --reverse            reverse the test (client receives, server sends)
      -T, --ttl       #        time-to-live, for multicast (default 1)
      -V, --ipv6_domain        Set the domain to IPv6 (send packets over IPv6)
      -X, --peer-detect        perform server version detection and version exchange
      -Z, --linux-congestion <algo>  set TCP congestion control algorithm (Linux only)
    
    Miscellaneous:
      -x, --reportexclude [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings) V(server) reports
      -y, --reportstyle C      report as a Comma-Separated Values
      -h, --help               print this message and quit
      -v, --version            print version information and quit
    
    [kmgKMG] Indicates options that support a k,m,g,K,M or G suffix
    Lowercase format characters are 10^3 based and uppercase are 2^n based
    (e.g. 1k = 1000, 1K = 1024, 1m = 1,000,000 and 1M = 1,048,576)
    
    The TCP window size option can be set by the environment variable
    TCP_WINDOW_SIZE. Most other options can be set by an environment variable
    IPERF_<long option name>, such as IPERF_BANDWIDTH.
    
    Source at <http://sourceforge.net/projects/iperf2/>
    Report bugs to <iperf-users@lists.sourceforge.net>

\# Windows 版本参数说明

c:\xx\iperf2>iperf.exe -h
    Usage: iperf [-s|-c host] [options]
           iperf [-h|--help] [-v|--version]
    
    Client/Server:
      -b, --bandwidth #[KMG | pps]  bandwidth to send at in bits/sec or packets per second
      -e, --enhancedreports    use enhanced reporting giving more tcp/udp and traffic information
      -f, --format    [kmKM]   format to report: Kbits, Mbits, KBytes, MBytes
      -i, --interval  #        seconds between periodic bandwidth reports
      -l, --len       #[KM]    length of buffer to read or write (default 8 KB)
      -m, --print_mss          print TCP maximum segment size (MTU - TCP/IP header)
      -o, --output    <filename> output the report or error message to this specified file
      -p, --port      #        server port to listen on/connect to
      -u, --udp                use UDP rather than TCP
      -w, --window    #[KM]    TCP window size (socket buffer size)
      -z, --realtime           request realtime scheduler
      -B, --bind      <host>   bind to <host>, an interface or multicast address
      -C, --compatibility      for use with older versions does not sent extra msgs
      -M, --mss       #        set TCP maximum segment size (MTU - 40 bytes)
      -N, --nodelay            set TCP no delay, disabling Nagle's Algorithm
      -V, --ipv6_domain        Set the domain to IPv6
    
    Server specific:
      -s, --server             run in server mode
      -U, --single_udp         run in single threaded UDP mode
      -D, --daemon             run the server as a daemon
    
    Client specific:
      -c, --client    <host>   run in client mode, connecting to <host>
      -d, --dualtest           Do a bidirectional test simultaneously
      -n, --num       #[KM]    number of bytes to transmit (instead of -t)
      -r, --tradeoff           Do a bidirectional test individually
      -t, --time      #        time in seconds to transmit for (default 10 secs)
      -B, --bind [<ip> | <ip:port>] bind src addr(s) from which to originate traffic
      -F, --fileinput <name>   input the data to be transmitted from a file
      -I, --stdin              input the data to be transmitted from stdin
      -L, --listenport #       port to receive bidirectional tests back on
      -P, --parallel  #        number of parallel client threads to run
      -T, --ttl       #        time-to-live, for multicast (default 1)
      -Z, --linux-congestion <algo>  set TCP congestion control algorithm (Linux only)
    
    Miscellaneous:
      -x, --reportexclude [CDMSV]   exclude C(connection) D(data) M(multicast) S(settings) V(server) reports
      -y, --reportstyle C      report as a Comma-Separated Values
      -h, --help               print this message and quit
      -v, --version            print version information and quit
    
    [KM] Indicates options that support a K or M suffix for kilo- or mega-
    
    The TCP window size option can be set by the environment variable
    TCP_WINDOW_SIZE. Most other options can be set by an environment variable
    IPERF_<long option name>, such as IPERF_BANDWIDTH.
    
    Source at <http://sourceforge.net/projects/iperf2/>
    Report bugs to <iperf-users@lists.sourceforge.net>

转载于:https://www.cnblogs.com/Cong0ks/p/11383139.html

[1342965-20190820143600310-678268227.png]: /images/20230601/f28e320e7f0848eaacb1439ad37c8ab0.png
[1342965-20190820152244660-1042822349.png]: /images/20230601/0e67166105894d8f96a5a8a7804f255b.png