chapter 8.3

梦里梦外; 2023-06-02 10:50 12阅读 0赞

![1737838-20190805161646823-1583880465.png][]

1. \[root@localhost ~\]\# fdisk /dev/sdb 欢迎使用 fdisk (util-linux 2.23.2)。

更改将停留在内存中，直到您决定将更改写入磁盘。 使用写入命令前请三思。

Device does not contain a recognized partition table 使用磁盘标识符 0x81db43c9 创建新的 DOS 磁盘标签。

命令(输入 m 获取帮助)：n Partition type:    p   primary (0 primary, 0 extended, 4 free)    e   extended Select (default p): p 分区号 (1-4，默认 1)：1 起始 扇区 (2048-41943039，默认为 2048)： 将使用默认值 2048 Last 扇区, +扇区 or +size\{K,M,G\} (2048-41943039，默认为 41943039)： 将使用默认值 41943039 分区 1 已设置为 Linux 类型，大小设为 20 GiB

命令(输入 m 获取帮助)：wq The partition table has been altered!

Calling ioctl() to re-read partition table. 正在同步磁盘。

fdisk /dev/sdd n p 1 回车 回车 Wq

2. \[root@localhost ~\]\# mdadm -Cv /dev/md5 -l5 -n3 /dev/sd\[bcd\]1 mdadm: layout defaults to left-symmetric mdadm: layout defaults to left-symmetric mdadm: chunk size defaults to 512K mdadm: size set to 20954112K mdadm: Defaulting to version 1.2 metadata mdadm: array /dev/md5 started.

3. \[root@localhost ~\]\# pvcreate /dev/md5   Physical volume "/dev/md5" successfully created

4. \[root@localhost ~\]\# vgcreate myvg /dev/md5   Volume group "myvg" successfully created

5. \[root@localhost ~\]\# lvcreate -L 10G -n mylv myvg   Logical volume "mylv" created.

6. \[root@localhost ~\]\# mkfs -t xfs /dev/myvg/mylv log stripe unit (524288 bytes) is too large (maximum is 256KiB) log stripe unit adjusted to 32KiB meta-data=/dev/myvg/mylv         isize=256    agcount=16, agsize=163712 blks          =                       sectsz=512   attr=2, projid32bit=1          =                       crc=0        finobt=0 data     =                       bsize=4096   blocks=2619392, imaxpct=25          =                       sunit=128    swidth=256 blks naming   =version 2              bsize=4096   ascii-ci=0 ftype=0 log      =internal log           bsize=4096   blocks=2560, version=2          =                       sectsz=512   sunit=8 blks, lazy-count=1 realtime =none                   extsz=4096   blocks=0, rtextents=0

7. yum -y install gcc gcc-c++ make

\[root@localhost Packages\]\# yum -y install gcc gcc-c++ make

\[root@localhost ~\]\# tar -xf httpd-2.2.17.tar.gz -C  /usr/src

\[root@localhost ~\]\# cd /usr/src/httpd-2.2.17/

\[root@localhost httpd-2.2.17\]\# ./configure --prefix=/usr/local/apache

\[root@localhost httpd-2.2.17\]\# make

\[root@localhost httpd-2.2.17\]\# make install

\[root@localhost httpd-2.2.17\]\# cd /usr/local/apache/conf/

\[root@localhost conf\]\# cp httpd.conf httpd.conf.bak

\[root@localhost conf\]\# vi /usr/local/apache/conf/httpd.conf

\[root@localhost conf\]\# /usr/local/apache/bin/apachectl start

\[root@localhost conf\]\# yum -y install lynx