Docker常用软件安装之Redis

港控/mmm° 2023-06-25 10:06 13阅读 0赞

本文我们来介绍下在Docker中如何安装Redis。

# 1.docker hub上搜索Redis #

docker search redis

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70]

# 2.下载镜像 #

从docker hub上下载4.0版本的Redis

docker pull redis:4.0

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 1]

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 2]

# 3.运行容器 #

镜像下载好后，我们就可以执行如下命令来运行了

docker run -p 6379:6379 -v /root/myredis/data:/data -v /root/myredis/conf/redis.conf:/usr/local/etc/redis/redis.conf  -d redis:4.0 redis-server /usr/local/etc/redis/redis.conf --appendonly yes

![在这里插入图片描述][20191227204642878.png]

# 4.验证 #

我们首先需要在`root/myredis/conf/redis.conf`目录下创建`redis.conf`配置文件。

# Redis configuration file example.
    
    #
    
    # Note that in order to read the configuration file, Redis must be
    
    # started with the file path as first argument:
    
    #
    
    # ./redis-server /path/to/redis.conf
    
     
    
    # Note on units: when memory size is needed, it is possible to specify
    
    # it in the usual form of 1k 5GB 4M and so forth:
    
    #
    
    # 1k => 1000 bytes
    
    # 1kb => 1024 bytes
    
    # 1m => 1000000 bytes
    
    # 1mb => 1024*1024 bytes
    
    # 1g => 1000000000 bytes
    
    # 1gb => 1024*1024*1024 bytes
    
    #
    
    # units are case insensitive so 1GB 1Gb 1gB are all the same.
    
    ################################## INCLUDES ###################################
    
     
    
    # Include one or more other config files here.  This is useful if you
    
    # have a standard template that goes to all Redis servers but also need
    
    # to customize a few per-server settings.  Include files can include
    
    # other files, so use this wisely.
    
    #
    
    # Notice option "include" won't be rewritten by command "CONFIG REWRITE"
    
    # from admin or Redis Sentinel. Since Redis always uses the last processed
    
    # line as value of a configuration directive, you'd better put includes
    
    # at the beginning of this file to avoid overwriting config change at runtime.
    
    #
    
    # If instead you are interested in using includes to override configuration
    
    # options, it is better to use include as the last line.
    
    #
    
    # include /path/to/local.conf
    
    # include /path/to/other.conf
    
     
    
    ################################## NETWORK #####################################
    
     
    
    # By default, if no "bind" configuration directive is specified, Redis listens
    
    # for connections from all the network interfaces available on the server.
    
    # It is possible to listen to just one or multiple selected interfaces using
    
    # the "bind" configuration directive, followed by one or more IP addresses.
    
    #
    
    # Examples:
    
    #
    
    # bind 192.168.1.100 10.0.0.1
    
    # bind 127.0.0.1 ::1
    
    #
    
    # ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
    
    # internet, binding to all the interfaces is dangerous and will expose the
    
    # instance to everybody on the internet. So by default we uncomment the
    
    # following bind directive, that will force Redis to listen only into
    
    # the IPv4 lookback interface address (this means Redis will be able to
    
    # accept connections only from clients running into the same computer it
    
    # is running).
    
    #
    
    # IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
    
    # JUST COMMENT THE FOLLOWING LINE.
    
    # ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    
    #bind 127.0.0.1
    
     
    
    # Protected mode is a layer of security protection, in order to avoid that
    
    # Redis instances left open on the internet are accessed and exploited.
    
    #
    
    # When protected mode is on and if:
    
    #
    
    # 1) The server is not binding explicitly to a set of addresses using the
    
    #    "bind" directive.
    
    # 2) No password is configured.
    
    #
    
    # The server only accepts connections from clients connecting from the
    
    # IPv4 and IPv6 loopback addresses 127.0.0.1 and ::1, and from Unix domain
    
    # sockets.
    
    #
    
    # By default protected mode is enabled. You should disable it only if
    
    # you are sure you want clients from other hosts to connect to Redis
    
    # even if no authentication is configured, nor a specific set of interfaces
    
    # are explicitly listed using the "bind" directive.
    
    protected-mode yes
    
     
    
    # Accept connections on the specified port, default is 6379 (IANA #815344).
    
    # If port 0 is specified Redis will not listen on a TCP socket.
    
    port 6379
    
     
    
    # TCP listen() backlog.
    
    #
    
    # In high requests-per-second environments you need an high backlog in order
    
    # to avoid slow clients connections issues. Note that the Linux kernel
    
    # will silently truncate it to the value of /proc/sys/net/core/somaxconn so
    
    # make sure to raise both the value of somaxconn and tcp_max_syn_backlog
    
    # in order to get the desired effect.
    
    tcp-backlog 511
    
     
    
    # Unix socket.
    
    #
    
    # Specify the path for the Unix socket that will be used to listen for
    
    # incoming connections. There is no default, so Redis will not listen
    
    # on a unix socket when not specified.
    
    #
    
    # unixsocket /tmp/redis.sock
    
    # unixsocketperm 700
    
     
    
    # Close the connection after a client is idle for N seconds (0 to disable)
    
    timeout 0
    
     
    
    # TCP keepalive.
    
    #
    
    # If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence
    
    # of communication. This is useful for two reasons:
    
    #
    
    # 1) Detect dead peers.
    
    # 2) Take the connection alive from the point of view of network
    
    #    equipment in the middle.
    
    #
    
    # On Linux, the specified value (in seconds) is the period used to send ACKs.
    
    # Note that to close the connection the double of the time is needed.
    
    # On other kernels the period depends on the kernel configuration.
    
    #
    
    # A reasonable value for this option is 300 seconds, which is the new
    
    # Redis default starting with Redis 3.2.1.
    
    tcp-keepalive 300
    
     
    
    ################################# GENERAL #####################################
    
     
    
    # By default Redis does not run as a daemon. Use 'yes' if you need it.
    
    # Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
    
    #daemonize no
    
     
    
    # If you run Redis from upstart or systemd, Redis can interact with your
    
    # supervision tree. Options:
    
    #   supervised no      - no supervision interaction
    
    #   supervised upstart - signal upstart by putting Redis into SIGSTOP mode
    
    #   supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
    
    #   supervised auto    - detect upstart or systemd method based on
    
    #                        UPSTART_JOB or NOTIFY_SOCKET environment variables
    
    # Note: these supervision methods only signal "process is ready."
    
    #       They do not enable continuous liveness pings back to your supervisor.
    
    supervised no
    
     
    
    # If a pid file is specified, Redis writes it where specified at startup
    
    # and removes it at exit.
    
    #
    
    # When the server runs non daemonized, no pid file is created if none is
    
    # specified in the configuration. When the server is daemonized, the pid file
    
    # is used even if not specified, defaulting to "/var/run/redis.pid".
    
    #
    
    # Creating a pid file is best effort: if Redis is not able to create it
    
    # nothing bad happens, the server will start and run normally.
    
    pidfile /var/run/redis_6379.pid
    
     
    
    # Specify the server verbosity level.
    
    # This can be one of:
    
    # debug (a lot of information, useful for development/testing)
    
    # verbose (many rarely useful info, but not a mess like the debug level)
    
    # notice (moderately verbose, what you want in production probably)
    
    # warning (only very important / critical messages are logged)
    
    loglevel notice
    
     
    
    # Specify the log file name. Also the empty string can be used to force
    
    # Redis to log on the standard output. Note that if you use standard
    
    # output for logging but daemonize, logs will be sent to /dev/null
    
    logfile ""
    
     
    
    # To enable logging to the system logger, just set 'syslog-enabled' to yes,
    
    # and optionally update the other syslog parameters to suit your needs.
    
    # syslog-enabled no
    
     
    
    # Specify the syslog identity.
    
    # syslog-ident redis
    
     
    
    # Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
    
    # syslog-facility local0
    
     
    
    # Set the number of databases. The default database is DB 0, you can select
    
    # a different one on a per-connection basis using SELECT <dbid> where
    
    # dbid is a number between 0 and 'databases'-1
    
    databases 16
    
     
    
    ################################ SNAPSHOTTING  ################################
    
    #
    
    # Save the DB on disk:
    
    #
    
    #   save <seconds> <changes>
    
    #
    
    #   Will save the DB if both the given number of seconds and the given
    
    #   number of write operations against the DB occurred.
    
    #
    
    #   In the example below the behaviour will be to save:
    
    #   after 900 sec (15 min) if at least 1 key changed
    
    #   after 300 sec (5 min) if at least 10 keys changed
    
    #   after 60 sec if at least 10000 keys changed
    
    #
    
    #   Note: you can disable saving completely by commenting out all "save" lines.
    
    #
    
    #   It is also possible to remove all the previously configured save
    
    #   points by adding a save directive with a single empty string argument
    
    #   like in the following example:
    
    #
    
    #   save ""
    
     
    
    save 120 1
    
    save 300 10
    
    save 60 10000
    
     
    
    # By default Redis will stop accepting writes if RDB snapshots are enabled
    
    # (at least one save point) and the latest background save failed.
    
    # This will make the user aware (in a hard way) that data is not persisting
    
    # on disk properly, otherwise chances are that no one will notice and some
    
    # disaster will happen.
    
    #
    
    # If the background saving process will start working again Redis will
    
    # automatically allow writes again.
    
    #
    
    # However if you have setup your proper monitoring of the Redis server
    
    # and persistence, you may want to disable this feature so that Redis will
    
    # continue to work as usual even if there are problems with disk,
    
    # permissions, and so forth.
    
    stop-writes-on-bgsave-error yes
    
     
    
    # Compress string objects using LZF when dump .rdb databases?
    
    # For default that's set to 'yes' as it's almost always a win.
    
    # If you want to save some CPU in the saving child set it to 'no' but
    
    # the dataset will likely be bigger if you have compressible values or keys.
    
    rdbcompression yes
    
     
    
    # Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
    
    # This makes the format more resistant to corruption but there is a performance
    
    # hit to pay (around 10%) when saving and loading RDB files, so you can disable it
    
    # for maximum performances.
    
    #
    
    # RDB files created with checksum disabled have a checksum of zero that will
    
    # tell the loading code to skip the check.
    
    rdbchecksum yes
    
     
    
    # The filename where to dump the DB
    
    dbfilename dump.rdb
    
     
    
    # The working directory.
    
    #
    
    # The DB will be written inside this directory, with the filename specified
    
    # above using the 'dbfilename' configuration directive.
    
    #
    
    # The Append Only File will also be created inside this directory.
    
    #
    
    # Note that you must specify a directory here, not a file name.
    
    dir ./
    
     
    
    ################################# REPLICATION #################################
    
     
    
    # Master-Slave replication. Use slaveof to make a Redis instance a copy of
    
    # another Redis server. A few things to understand ASAP about Redis replication.
    
    #
    
    # 1) Redis replication is asynchronous, but you can configure a master to
    
    #    stop accepting writes if it appears to be not connected with at least
    
    #    a given number of slaves.
    
    # 2) Redis slaves are able to perform a partial resynchronization with the
    
    #    master if the replication link is lost for a relatively small amount of
    
    #    time. You may want to configure the replication backlog size (see the next
    
    #    sections of this file) with a sensible value depending on your needs.
    
    # 3) Replication is automatic and does not need user intervention. After a
    
    #    network partition slaves automatically try to reconnect to masters
    
    #    and resynchronize with them.
    
    #
    
    # slaveof <masterip> <masterport>
    
     
    
    # If the master is password protected (using the "requirepass" configuration
    
    # directive below) it is possible to tell the slave to authenticate before
    
    # starting the replication synchronization process, otherwise the master will
    
    # refuse the slave request.
    
    #
    
    # masterauth <master-password>
    
     
    
    # When a slave loses its connection with the master, or when the replication
    
    # is still in progress, the slave can act in two different ways:
    
    #
    
    # 1) if slave-serve-stale-data is set to 'yes' (the default) the slave will
    
    #    still reply to client requests, possibly with out of date data, or the
    
    #    data set may just be empty if this is the first synchronization.
    
    #
    
    # 2) if slave-serve-stale-data is set to 'no' the slave will reply with
    
    #    an error "SYNC with master in progress" to all the kind of commands
    
    #    but to INFO and SLAVEOF.
    
    #
    
    slave-serve-stale-data yes
    
     
    
    # You can configure a slave instance to accept writes or not. Writing against
    
    # a slave instance may be useful to store some ephemeral data (because data
    
    # written on a slave will be easily deleted after resync with the master) but
    
    # may also cause problems if clients are writing to it because of a
    
    # misconfiguration.
    
    #
    
    # Since Redis 2.6 by default slaves are read-only.
    
    #
    
    # Note: read only slaves are not designed to be exposed to untrusted clients
    
    # on the internet. It's just a protection layer against misuse of the instance.
    
    # Still a read only slave exports by default all the administrative commands
    
    # such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
    
    # security of read only slaves using 'rename-command' to shadow all the
    
    # administrative / dangerous commands.
    
    slave-read-only yes
    
     
    
    # Replication SYNC strategy: disk or socket.
    
    #
    
    # -------------------------------------------------------
    
    # WARNING: DISKLESS REPLICATION IS EXPERIMENTAL CURRENTLY
    
    # -------------------------------------------------------
    
    #
    
    # New slaves and reconnecting slaves that are not able to continue the replication
    
    # process just receiving differences, need to do what is called a "full
    
    # synchronization". An RDB file is transmitted from the master to the slaves.
    
    # The transmission can happen in two different ways:
    
    #
    
    # 1) Disk-backed: The Redis master creates a new process that writes the RDB
    
    #                 file on disk. Later the file is transferred by the parent
    
    #                 process to the slaves incrementally.
    
    # 2) Diskless: The Redis master creates a new process that directly writes the
    
    #              RDB file to slave sockets, without touching the disk at all.
    
    #
    
    # With disk-backed replication, while the RDB file is generated, more slaves
    
    # can be queued and served with the RDB file as soon as the current child producing
    
    # the RDB file finishes its work. With diskless replication instead once
    
    # the transfer starts, new slaves arriving will be queued and a new transfer
    
    # will start when the current one terminates.
    
    #
    
    # When diskless replication is used, the master waits a configurable amount of
    
    # time (in seconds) before starting the transfer in the hope that multiple slaves
    
    # will arrive and the transfer can be parallelized.
    
    #
    
    # With slow disks and fast (large bandwidth) networks, diskless replication
    
    # works better.
    
    repl-diskless-sync no
    
     
    
    # When diskless replication is enabled, it is possible to configure the delay
    
    # the server waits in order to spawn the child that transfers the RDB via socket
    
    # to the slaves.
    
    #
    
    # This is important since once the transfer starts, it is not possible to serve
    
    # new slaves arriving, that will be queued for the next RDB transfer, so the server
    
    # waits a delay in order to let more slaves arrive.
    
    #
    
    # The delay is specified in seconds, and by default is 5 seconds. To disable
    
    # it entirely just set it to 0 seconds and the transfer will start ASAP.
    
    repl-diskless-sync-delay 5
    
     
    
    # Slaves send PINGs to server in a predefined interval. It's possible to change
    
    # this interval with the repl_ping_slave_period option. The default value is 10
    
    # seconds.
    
    #
    
    # repl-ping-slave-period 10
    
     
    
    # The following option sets the replication timeout for:
    
    #
    
    # 1) Bulk transfer I/O during SYNC, from the point of view of slave.
    
    # 2) Master timeout from the point of view of slaves (data, pings).
    
    # 3) Slave timeout from the point of view of masters (REPLCONF ACK pings).
    
    #
    
    # It is important to make sure that this value is greater than the value
    
    # specified for repl-ping-slave-period otherwise a timeout will be detected
    
    # every time there is low traffic between the master and the slave.
    
    #
    
    # repl-timeout 60
    
     
    
    # Disable TCP_NODELAY on the slave socket after SYNC?
    
    #
    
    # If you select "yes" Redis will use a smaller number of TCP packets and
    
    # less bandwidth to send data to slaves. But this can add a delay for
    
    # the data to appear on the slave side, up to 40 milliseconds with
    
    # Linux kernels using a default configuration.
    
    #
    
    # If you select "no" the delay for data to appear on the slave side will
    
    # be reduced but more bandwidth will be used for replication.
    
    #
    
    # By default we optimize for low latency, but in very high traffic conditions
    
    # or when the master and slaves are many hops away, turning this to "yes" may
    
    # be a good idea.
    
    repl-disable-tcp-nodelay no
    
     
    
    # Set the replication backlog size. The backlog is a buffer that accumulates
    
    # slave data when slaves are disconnected for some time, so that when a slave
    
    # wants to reconnect again, often a full resync is not needed, but a partial
    
    # resync is enough, just passing the portion of data the slave missed while
    
    # disconnected.
    
    #
    
    # The bigger the replication backlog, the longer the time the slave can be
    
    # disconnected and later be able to perform a partial resynchronization.
    
    #
    
    # The backlog is only allocated once there is at least a slave connected.
    
    #
    
    # repl-backlog-size 1mb
    
     
    
    # After a master has no longer connected slaves for some time, the backlog
    
    # will be freed. The following option configures the amount of seconds that
    
    # need to elapse, starting from the time the last slave disconnected, for
    
    # the backlog buffer to be freed.
    
    #
    
    # A value of 0 means to never release the backlog.
    
    #
    
    # repl-backlog-ttl 3600
    
     
    
    # The slave priority is an integer number published by Redis in the INFO output.
    
    # It is used by Redis Sentinel in order to select a slave to promote into a
    
    # master if the master is no longer working correctly.
    
    #
    
    # A slave with a low priority number is considered better for promotion, so
    
    # for instance if there are three slaves with priority 10, 100, 25 Sentinel will
    
    # pick the one with priority 10, that is the lowest.
    
    #
    
    # However a special priority of 0 marks the slave as not able to perform the
    
    # role of master, so a slave with priority of 0 will never be selected by
    
    # Redis Sentinel for promotion.
    
    #
    
    # By default the priority is 100.
    
    slave-priority 100
    
     
    
    # It is possible for a master to stop accepting writes if there are less than
    
    # N slaves connected, having a lag less or equal than M seconds.
    
    #
    
    # The N slaves need to be in "online" state.
    
    #
    
    # The lag in seconds, that must be <= the specified value, is calculated from
    
    # the last ping received from the slave, that is usually sent every second.
    
    #
    
    # This option does not GUARANTEE that N replicas will accept the write, but
    
    # will limit the window of exposure for lost writes in case not enough slaves
    
    # are available, to the specified number of seconds.
    
    #
    
    # For example to require at least 3 slaves with a lag <= 10 seconds use:
    
    #
    
    # min-slaves-to-write 3
    
    # min-slaves-max-lag 10
    
    #
    
    # Setting one or the other to 0 disables the feature.
    
    #
    
    # By default min-slaves-to-write is set to 0 (feature disabled) and
    
    # min-slaves-max-lag is set to 10.
    
     
    
    # A Redis master is able to list the address and port of the attached
    
    # slaves in different ways. For example the "INFO replication" section
    
    # offers this information, which is used, among other tools, by
    
    # Redis Sentinel in order to discover slave instances.
    
    # Another place where this info is available is in the output of the
    
    # "ROLE" command of a masteer.
    
    #
    
    # The listed IP and address normally reported by a slave is obtained
    
    # in the following way:
    
    #
    
    #   IP: The address is auto detected by checking the peer address
    
    #   of the socket used by the slave to connect with the master.
    
    #
    
    #   Port: The port is communicated by the slave during the replication
    
    #   handshake, and is normally the port that the slave is using to
    
    #   list for connections.
    
    #
    
    # However when port forwarding or Network Address Translation (NAT) is
    
    # used, the slave may be actually reachable via different IP and port
    
    # pairs. The following two options can be used by a slave in order to
    
    # report to its master a specific set of IP and port, so that both INFO
    
    # and ROLE will report those values.
    
    #
    
    # There is no need to use both the options if you need to override just
    
    # the port or the IP address.
    
    #
    
    # slave-announce-ip 5.5.5.5
    
    # slave-announce-port 1234
    
     
    
    ################################## SECURITY ###################################
    
     
    
    # Require clients to issue AUTH <PASSWORD> before processing any other
    
    # commands.  This might be useful in environments in which you do not trust
    
    # others with access to the host running redis-server.
    
    #
    
    # This should stay commented out for backward compatibility and because most
    
    # people do not need auth (e.g. they run their own servers).
    
    #
    
    # Warning: since Redis is pretty fast an outside user can try up to
    
    # 150k passwords per second against a good box. This means that you should
    
    # use a very strong password otherwise it will be very easy to break.
    
    #
    
    # requirepass foobared
    
     
    
    # Command renaming.
    
    #
    
    # It is possible to change the name of dangerous commands in a shared
    
    # environment. For instance the CONFIG command may be renamed into something
    
    # hard to guess so that it will still be available for internal-use tools
    
    # but not available for general clients.
    
    #
    
    # Example:
    
    #
    
    # rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
    
    #
    
    # It is also possible to completely kill a command by renaming it into
    
    # an empty string:
    
    #
    
    # rename-command CONFIG ""
    
    #
    
    # Please note that changing the name of commands that are logged into the
    
    # AOF file or transmitted to slaves may cause problems.
    
     
    
    ################################### LIMITS ####################################
    
     
    
    # Set the max number of connected clients at the same time. By default
    
    # this limit is set to 10000 clients, however if the Redis server is not
    
    # able to configure the process file limit to allow for the specified limit
    
    # the max number of allowed clients is set to the current file limit
    
    # minus 32 (as Redis reserves a few file descriptors for internal uses).
    
    #
    
    # Once the limit is reached Redis will close all the new connections sending
    
    # an error 'max number of clients reached'.
    
    #
    
    # maxclients 10000
    
     
    
    # Don't use more memory than the specified amount of bytes.
    
    # When the memory limit is reached Redis will try to remove keys
    
    # according to the eviction policy selected (see maxmemory-policy).
    
    #
    
    # If Redis can't remove keys according to the policy, or if the policy is
    
    # set to 'noeviction', Redis will start to reply with errors to commands
    
    # that would use more memory, like SET, LPUSH, and so on, and will continue
    
    # to reply to read-only commands like GET.
    
    #
    
    # This option is usually useful when using Redis as an LRU cache, or to set
    
    # a hard memory limit for an instance (using the 'noeviction' policy).
    
    #
    
    # WARNING: If you have slaves attached to an instance with maxmemory on,
    
    # the size of the output buffers needed to feed the slaves are subtracted
    
    # from the used memory count, so that network problems / resyncs will
    
    # not trigger a loop where keys are evicted, and in turn the output
    
    # buffer of slaves is full with DELs of keys evicted triggering the deletion
    
    # of more keys, and so forth until the database is completely emptied.
    
    #
    
    # In short... if you have slaves attached it is suggested that you set a lower
    
    # limit for maxmemory so that there is some free RAM on the system for slave
    
    # output buffers (but this is not needed if the policy is 'noeviction').
    
    #
    
    # maxmemory <bytes>
    
     
    
    # MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
    
    # is reached. You can select among five behaviors:
    
    #
    
    # volatile-lru -> remove the key with an expire set using an LRU algorithm
    
    # allkeys-lru -> remove any key according to the LRU algorithm
    
    # volatile-random -> remove a random key with an expire set
    
    # allkeys-random -> remove a random key, any key
    
    # volatile-ttl -> remove the key with the nearest expire time (minor TTL)
    
    # noeviction -> don't expire at all, just return an error on write operations
    
    #
    
    # Note: with any of the above policies, Redis will return an error on write
    
    #       operations, when there are no suitable keys for eviction.
    
    #
    
    #       At the date of writing these commands are: set setnx setex append
    
    #       incr decr rpush lpush rpushx lpushx linsert lset rpoplpush sadd
    
    #       sinter sinterstore sunion sunionstore sdiff sdiffstore zadd zincrby
    
    #       zunionstore zinterstore hset hsetnx hmset hincrby incrby decrby
    
    #       getset mset msetnx exec sort
    
    #
    
    # The default is:
    
    #
    
    # maxmemory-policy noeviction
    
     
    
    # LRU and minimal TTL algorithms are not precise algorithms but approximated
    
    # algorithms (in order to save memory), so you can tune it for speed or
    
    # accuracy. For default Redis will check five keys and pick the one that was
    
    # used less recently, you can change the sample size using the following
    
    # configuration directive.
    
    #
    
    # The default of 5 produces good enough results. 10 Approximates very closely
    
    # true LRU but costs a bit more CPU. 3 is very fast but not very accurate.
    
    #
    
    # maxmemory-samples 5
    
     
    
    ############################## APPEND ONLY MODE ###############################
    
     
    
    # By default Redis asynchronously dumps the dataset on disk. This mode is
    
    # good enough in many applications, but an issue with the Redis process or
    
    # a power outage may result into a few minutes of writes lost (depending on
    
    # the configured save points).
    
    #
    
    # The Append Only File is an alternative persistence mode that provides
    
    # much better durability. For instance using the default data fsync policy
    
    # (see later in the config file) Redis can lose just one second of writes in a
    
    # dramatic event like a server power outage, or a single write if something
    
    # wrong with the Redis process itself happens, but the operating system is
    
    # still running correctly.
    
    #
    
    # AOF and RDB persistence can be enabled at the same time without problems.
    
    # If the AOF is enabled on startup Redis will load the AOF, that is the file
    
    # with the better durability guarantees.
    
    #
    
    # Please check http://redis.io/topics/persistence for more information.
    
     
    
    appendonly no
    
     
    
    # The name of the append only file (default: "appendonly.aof")
    
     
    
    appendfilename "appendonly.aof"
    
     
    
    # The fsync() call tells the Operating System to actually write data on disk
    
    # instead of waiting for more data in the output buffer. Some OS will really flush
    
    # data on disk, some other OS will just try to do it ASAP.
    
    #
    
    # Redis supports three different modes:
    
    #
    
    # no: don't fsync, just let the OS flush the data when it wants. Faster.
    
    # always: fsync after every write to the append only log. Slow, Safest.
    
    # everysec: fsync only one time every second. Compromise.
    
    #
    
    # The default is "everysec", as that's usually the right compromise between
    
    # speed and data safety. It's up to you to understand if you can relax this to
    
    # "no" that will let the operating system flush the output buffer when
    
    # it wants, for better performances (but if you can live with the idea of
    
    # some data loss consider the default persistence mode that's snapshotting),
    
    # or on the contrary, use "always" that's very slow but a bit safer than
    
    # everysec.
    
    #
    
    # More details please check the following article:
    
    # http://antirez.com/post/redis-persistence-demystified.html
    
    #
    
    # If unsure, use "everysec".
    
     
    
    # appendfsync always
    
    appendfsync everysec
    
    # appendfsync no
    
     
    
    # When the AOF fsync policy is set to always or everysec, and a background
    
    # saving process (a background save or AOF log background rewriting) is
    
    # performing a lot of I/O against the disk, in some Linux configurations
    
    # Redis may block too long on the fsync() call. Note that there is no fix for
    
    # this currently, as even performing fsync in a different thread will block
    
    # our synchronous write(2) call.
    
    #
    
    # In order to mitigate this problem it's possible to use the following option
    
    # that will prevent fsync() from being called in the main process while a
    
    # BGSAVE or BGREWRITEAOF is in progress.
    
    #
    
    # This means that while another child is saving, the durability of Redis is
    
    # the same as "appendfsync none". In practical terms, this means that it is
    
    # possible to lose up to 30 seconds of log in the worst scenario (with the
    
    # default Linux settings).
    
    #
    
    # If you have latency problems turn this to "yes". Otherwise leave it as
    
    # "no" that is the safest pick from the point of view of durability.
    
     
    
    no-appendfsync-on-rewrite no
    
     
    
    # Automatic rewrite of the append only file.
    
    # Redis is able to automatically rewrite the log file implicitly calling
    
    # BGREWRITEAOF when the AOF log size grows by the specified percentage.
    
    #
    
    # This is how it works: Redis remembers the size of the AOF file after the
    
    # latest rewrite (if no rewrite has happened since the restart, the size of
    
    # the AOF at startup is used).
    
    #
    
    # This base size is compared to the current size. If the current size is
    
    # bigger than the specified percentage, the rewrite is triggered. Also
    
    # you need to specify a minimal size for the AOF file to be rewritten, this
    
    # is useful to avoid rewriting the AOF file even if the percentage increase
    
    # is reached but it is still pretty small.
    
    #
    
    # Specify a percentage of zero in order to disable the automatic AOF
    
    # rewrite feature.
    
     
    
    auto-aof-rewrite-percentage 100
    
    auto-aof-rewrite-min-size 64mb
    
     
    
    # An AOF file may be found to be truncated at the end during the Redis
    
    # startup process, when the AOF data gets loaded back into memory.
    
    # This may happen when the system where Redis is running
    
    # crashes, especially when an ext4 filesystem is mounted without the
    
    # data=ordered option (however this can't happen when Redis itself
    
    # crashes or aborts but the operating system still works correctly).
    
    #
    
    # Redis can either exit with an error when this happens, or load as much
    
    # data as possible (the default now) and start if the AOF file is found
    
    # to be truncated at the end. The following option controls this behavior.
    
    #
    
    # If aof-load-truncated is set to yes, a truncated AOF file is loaded and
    
    # the Redis server starts emitting a log to inform the user of the event.
    
    # Otherwise if the option is set to no, the server aborts with an error
    
    # and refuses to start. When the option is set to no, the user requires
    
    # to fix the AOF file using the "redis-check-aof" utility before to restart
    
    # the server.
    
    #
    
    # Note that if the AOF file will be found to be corrupted in the middle
    
    # the server will still exit with an error. This option only applies when
    
    # Redis will try to read more data from the AOF file but not enough bytes
    
    # will be found.
    
    aof-load-truncated yes
    
     
    
    ################################ LUA SCRIPTING  ###############################
    
     
    
    # Max execution time of a Lua script in milliseconds.
    
    #
    
    # If the maximum execution time is reached Redis will log that a script is
    
    # still in execution after the maximum allowed time and will start to
    
    # reply to queries with an error.
    
    #
    
    # When a long running script exceeds the maximum execution time only the
    
    # SCRIPT KILL and SHUTDOWN NOSAVE commands are available. The first can be
    
    # used to stop a script that did not yet called write commands. The second
    
    # is the only way to shut down the server in the case a write command was
    
    # already issued by the script but the user doesn't want to wait for the natural
    
    # termination of the script.
    
    #
    
    # Set it to 0 or a negative value for unlimited execution without warnings.
    
    lua-time-limit 5000
    
     
    
    ################################ REDIS CLUSTER  ###############################
    
    #
    
    # ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    
    # WARNING EXPERIMENTAL: Redis Cluster is considered to be stable code, however
    
    # in order to mark it as "mature" we need to wait for a non trivial percentage
    
    # of users to deploy it in production.
    
    # ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    
    #
    
    # Normal Redis instances can't be part of a Redis Cluster; only nodes that are
    
    # started as cluster nodes can. In order to start a Redis instance as a
    
    # cluster node enable the cluster support uncommenting the following:
    
    #
    
    # cluster-enabled yes
    
     
    
    # Every cluster node has a cluster configuration file. This file is not
    
    # intended to be edited by hand. It is created and updated by Redis nodes.
    
    # Every Redis Cluster node requires a different cluster configuration file.
    
    # Make sure that instances running in the same system do not have
    
    # overlapping cluster configuration file names.
    
    #
    
    # cluster-config-file nodes-6379.conf
    
     
    
    # Cluster node timeout is the amount of milliseconds a node must be unreachable
    
    # for it to be considered in failure state.
    
    # Most other internal time limits are multiple of the node timeout.
    
    #
    
    # cluster-node-timeout 15000
    
     
    
    # A slave of a failing master will avoid to start a failover if its data
    
    # looks too old.
    
    #
    
    # There is no simple way for a slave to actually have a exact measure of
    
    # its "data age", so the following two checks are performed:
    
    #
    
    # 1) If there are multiple slaves able to failover, they exchange messages
    
    #    in order to try to give an advantage to the slave with the best
    
    #    replication offset (more data from the master processed).
    
    #    Slaves will try to get their rank by offset, and apply to the start
    
    #    of the failover a delay proportional to their rank.
    
    #
    
    # 2) Every single slave computes the time of the last interaction with
    
    #    its master. This can be the last ping or command received (if the master
    
    #    is still in the "connected" state), or the time that elapsed since the
    
    #    disconnection with the master (if the replication link is currently down).
    
    #    If the last interaction is too old, the slave will not try to failover
    
    #    at all.
    
    #
    
    # The point "2" can be tuned by user. Specifically a slave will not perform
    
    # the failover if, since the last interaction with the master, the time
    
    # elapsed is greater than:
    
    #
    
    #   (node-timeout * slave-validity-factor) + repl-ping-slave-period
    
    #
    
    # So for example if node-timeout is 30 seconds, and the slave-validity-factor
    
    # is 10, and assuming a default repl-ping-slave-period of 10 seconds, the
    
    # slave will not try to failover if it was not able to talk with the master
    
    # for longer than 310 seconds.
    
    #
    
    # A large slave-validity-factor may allow slaves with too old data to failover
    
    # a master, while a too small value may prevent the cluster from being able to
    
    # elect a slave at all.
    
    #
    
    # For maximum availability, it is possible to set the slave-validity-factor
    
    # to a value of 0, which means, that slaves will always try to failover the
    
    # master regardless of the last time they interacted with the master.
    
    # (However they'll always try to apply a delay proportional to their
    
    # offset rank).
    
    #
    
    # Zero is the only value able to guarantee that when all the partitions heal
    
    # the cluster will always be able to continue.
    
    #
    
    # cluster-slave-validity-factor 10
    
     
    
    # Cluster slaves are able to migrate to orphaned masters, that are masters
    
    # that are left without working slaves. This improves the cluster ability
    
    # to resist to failures as otherwise an orphaned master can't be failed over
    
    # in case of failure if it has no working slaves.
    
    #
    
    # Slaves migrate to orphaned masters only if there are still at least a
    
    # given number of other working slaves for their old master. This number
    
    # is the "migration barrier". A migration barrier of 1 means that a slave
    
    # will migrate only if there is at least 1 other working slave for its master
    
    # and so forth. It usually reflects the number of slaves you want for every
    
    # master in your cluster.
    
    #
    
    # Default is 1 (slaves migrate only if their masters remain with at least
    
    # one slave). To disable migration just set it to a very large value.
    
    # A value of 0 can be set but is useful only for debugging and dangerous
    
    # in production.
    
    #
    
    # cluster-migration-barrier 1
    
     
    
    # By default Redis Cluster nodes stop accepting queries if they detect there
    
    # is at least an hash slot uncovered (no available node is serving it).
    
    # This way if the cluster is partially down (for example a range of hash slots
    
    # are no longer covered) all the cluster becomes, eventually, unavailable.
    
    # It automatically returns available as soon as all the slots are covered again.
    
    #
    
    # However sometimes you want the subset of the cluster which is working,
    
    # to continue to accept queries for the part of the key space that is still
    
    # covered. In order to do so, just set the cluster-require-full-coverage
    
    # option to no.
    
    #
    
    # cluster-require-full-coverage yes
    
     
    
    # In order to setup your cluster make sure to read the documentation
    
    # available at http://redis.io web site.
    
     
    
    ################################## SLOW LOG ###################################
    
     
    
    # The Redis Slow Log is a system to log queries that exceeded a specified
    
    # execution time. The execution time does not include the I/O operations
    
    # like talking with the client, sending the reply and so forth,
    
    # but just the time needed to actually execute the command (this is the only
    
    # stage of command execution where the thread is blocked and can not serve
    
    # other requests in the meantime).
    
    #
    
    # You can configure the slow log with two parameters: one tells Redis
    
    # what is the execution time, in microseconds, to exceed in order for the
    
    # command to get logged, and the other parameter is the length of the
    
    # slow log. When a new command is logged the oldest one is removed from the
    
    # queue of logged commands.
    
     
    
    # The following time is expressed in microseconds, so 1000000 is equivalent
    
    # to one second. Note that a negative number disables the slow log, while
    
    # a value of zero forces the logging of every command.
    
    slowlog-log-slower-than 10000
    
     
    
    # There is no limit to this length. Just be aware that it will consume memory.
    
    # You can reclaim memory used by the slow log with SLOWLOG RESET.
    
    slowlog-max-len 128
    
     
    
    ################################ LATENCY MONITOR ##############################
    
     
    
    # The Redis latency monitoring subsystem samples different operations
    
    # at runtime in order to collect data related to possible sources of
    
    # latency of a Redis instance.
    
    #
    
    # Via the LATENCY command this information is available to the user that can
    
    # print graphs and obtain reports.
    
    #
    
    # The system only logs operations that were performed in a time equal or
    
    # greater than the amount of milliseconds specified via the
    
    # latency-monitor-threshold configuration directive. When its value is set
    
    # to zero, the latency monitor is turned off.
    
    #
    
    # By default latency monitoring is disabled since it is mostly not needed
    
    # if you don't have latency issues, and collecting data has a performance
    
    # impact, that while very small, can be measured under big load. Latency
    
    # monitoring can easily be enabled at runtime using the command
    
    # "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.
    
    latency-monitor-threshold 0
    
     
    
    ############################# EVENT NOTIFICATION ##############################
    
     
    
    # Redis can notify Pub/Sub clients about events happening in the key space.
    
    # This feature is documented at http://redis.io/topics/notifications
    
    #
    
    # For instance if keyspace events notification is enabled, and a client
    
    # performs a DEL operation on key "foo" stored in the Database 0, two
    
    # messages will be published via Pub/Sub:
    
    #
    
    # PUBLISH __keyspace@0__:foo del
    
    # PUBLISH __keyevent@0__:del foo
    
    #
    
    # It is possible to select the events that Redis will notify among a set
    
    # of classes. Every class is identified by a single character:
    
    #
    
    #  K     Keyspace events, published with __keyspace@<db>__ prefix.
    
    #  E     Keyevent events, published with __keyevent@<db>__ prefix.
    
    #  g     Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...
    
    #  $     String commands
    
    #  l     List commands
    
    #  s     Set commands
    
    #  h     Hash commands
    
    #  z     Sorted set commands
    
    #  x     Expired events (events generated every time a key expires)
    
    #  e     Evicted events (events generated when a key is evicted for maxmemory)
    
    #  A     Alias for g$lshzxe, so that the "AKE" string means all the events.
    
    #
    
    #  The "notify-keyspace-events" takes as argument a string that is composed
    
    #  of zero or multiple characters. The empty string means that notifications
    
    #  are disabled.
    
    #
    
    #  Example: to enable list and generic events, from the point of view of the
    
    #           event name, use:
    
    #
    
    #  notify-keyspace-events Elg
    
    #
    
    #  Example 2: to get the stream of the expired keys subscribing to channel
    
    #             name __keyevent@0__:expired use:
    
    #
    
    #  notify-keyspace-events Ex
    
    #
    
    #  By default all notifications are disabled because most users don't need
    
    #  this feature and the feature has some overhead. Note that if you don't
    
    #  specify at least one of K or E, no events will be delivered.
    
    notify-keyspace-events ""
    
     
    
    ############################### ADVANCED CONFIG ###############################
    
     
    
    # Hashes are encoded using a memory efficient data structure when they have a
    
    # small number of entries, and the biggest entry does not exceed a given
    
    # threshold. These thresholds can be configured using the following directives.
    
    hash-max-ziplist-entries 512
    
    hash-max-ziplist-value 64
    
     
    
    # Lists are also encoded in a special way to save a lot of space.
    
    # The number of entries allowed per internal list node can be specified
    
    # as a fixed maximum size or a maximum number of elements.
    
    # For a fixed maximum size, use -5 through -1, meaning:
    
    # -5: max size: 64 Kb  <-- not recommended for normal workloads
    
    # -4: max size: 32 Kb  <-- not recommended
    
    # -3: max size: 16 Kb  <-- probably not recommended
    
    # -2: max size: 8 Kb   <-- good
    
    # -1: max size: 4 Kb   <-- good
    
    # Positive numbers mean store up to _exactly_ that number of elements
    
    # per list node.
    
    # The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
    
    # but if your use case is unique, adjust the settings as necessary.
    
    list-max-ziplist-size -2
    
     
    
    # Lists may also be compressed.
    
    # Compress depth is the number of quicklist ziplist nodes from *each* side of
    
    # the list to *exclude* from compression.  The head and tail of the list
    
    # are always uncompressed for fast push/pop operations.  Settings are:
    
    # 0: disable all list compression
    
    # 1: depth 1 means "don't start compressing until after 1 node into the list,
    
    #    going from either the head or tail"
    
    #    So: [head]->node->node->...->node->[tail]
    
    #    [head], [tail] will always be uncompressed; inner nodes will compress.
    
    # 2: [head]->[next]->node->node->...->node->[prev]->[tail]
    
    #    2 here means: don't compress head or head->next or tail->prev or tail,
    
    #    but compress all nodes between them.
    
    # 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
    
    # etc.
    
    list-compress-depth 0
    
     
    
    # Sets have a special encoding in just one case: when a set is composed
    
    # of just strings that happen to be integers in radix 10 in the range
    
    # of 64 bit signed integers.
    
    # The following configuration setting sets the limit in the size of the
    
    # set in order to use this special memory saving encoding.
    
    set-max-intset-entries 512
    
     
    
    # Similarly to hashes and lists, sorted sets are also specially encoded in
    
    # order to save a lot of space. This encoding is only used when the length and
    
    # elements of a sorted set are below the following limits:
    
    zset-max-ziplist-entries 128
    
    zset-max-ziplist-value 64
    
     
    
    # HyperLogLog sparse representation bytes limit. The limit includes the
    
    # 16 bytes header. When an HyperLogLog using the sparse representation crosses
    
    # this limit, it is converted into the dense representation.
    
    #
    
    # A value greater than 16000 is totally useless, since at that point the
    
    # dense representation is more memory efficient.
    
    #
    
    # The suggested value is ~ 3000 in order to have the benefits of
    
    # the space efficient encoding without slowing down too much PFADD,
    
    # which is O(N) with the sparse encoding. The value can be raised to
    
    # ~ 10000 when CPU is not a concern, but space is, and the data set is
    
    # composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
    
    hll-sparse-max-bytes 3000
    
     
    
    # Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
    
    # order to help rehashing the main Redis hash table (the one mapping top-level
    
    # keys to values). The hash table implementation Redis uses (see dict.c)
    
    # performs a lazy rehashing: the more operation you run into a hash table
    
    # that is rehashing, the more rehashing "steps" are performed, so if the
    
    # server is idle the rehashing is never complete and some more memory is used
    
    # by the hash table.
    
    #
    
    # The default is to use this millisecond 10 times every second in order to
    
    # actively rehash the main dictionaries, freeing memory when possible.
    
    #
    
    # If unsure:
    
    # use "activerehashing no" if you have hard latency requirements and it is
    
    # not a good thing in your environment that Redis can reply from time to time
    
    # to queries with 2 milliseconds delay.
    
    #
    
    # use "activerehashing yes" if you don't have such hard requirements but
    
    # want to free memory asap when possible.
    
    activerehashing yes
    
     
    
    # The client output buffer limits can be used to force disconnection of clients
    
    # that are not reading data from the server fast enough for some reason (a
    
    # common reason is that a Pub/Sub client can't consume messages as fast as the
    
    # publisher can produce them).
    
    #
    
    # The limit can be set differently for the three different classes of clients:
    
    #
    
    # normal -> normal clients including MONITOR clients
    
    # slave  -> slave clients
    
    # pubsub -> clients subscribed to at least one pubsub channel or pattern
    
    #
    
    # The syntax of every client-output-buffer-limit directive is the following:
    
    #
    
    # client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
    
    #
    
    # A client is immediately disconnected once the hard limit is reached, or if
    
    # the soft limit is reached and remains reached for the specified number of
    
    # seconds (continuously).
    
    # So for instance if the hard limit is 32 megabytes and the soft limit is
    
    # 16 megabytes / 10 seconds, the client will get disconnected immediately
    
    # if the size of the output buffers reach 32 megabytes, but will also get
    
    # disconnected if the client reaches 16 megabytes and continuously overcomes
    
    # the limit for 10 seconds.
    
    #
    
    # By default normal clients are not limited because they don't receive data
    
    # without asking (in a push way), but just after a request, so only
    
    # asynchronous clients may create a scenario where data is requested faster
    
    # than it can read.
    
    #
    
    # Instead there is a default limit for pubsub and slave clients, since
    
    # subscribers and slaves receive data in a push fashion.
    
    #
    
    # Both the hard or the soft limit can be disabled by setting them to zero.
    
    client-output-buffer-limit normal 0 0 0
    
    client-output-buffer-limit slave 256mb 64mb 60
    
    client-output-buffer-limit pubsub 32mb 8mb 60
    
     
    
    # Redis calls an internal function to perform many background tasks, like
    
    # closing connections of clients in timeout, purging expired keys that are
    
    # never requested, and so forth.
    
    #
    
    # Not all tasks are performed with the same frequency, but Redis checks for
    
    # tasks to perform according to the specified "hz" value.
    
    #
    
    # By default "hz" is set to 10. Raising the value will use more CPU when
    
    # Redis is idle, but at the same time will make Redis more responsive when
    
    # there are many keys expiring at the same time, and timeouts may be
    
    # handled with more precision.
    
    #
    
    # The range is between 1 and 500, however a value over 100 is usually not
    
    # a good idea. Most users should use the default of 10 and raise this up to
    
    # 100 only in environments where very low latency is required.
    
    hz 10
    
     
    
    # When a child rewrites the AOF file, if the following option is enabled
    
    # the file will be fsync-ed every 32 MB of data generated. This is useful
    
    # in order to commit the file to the disk more incrementally and avoid
    
    # big latency spikes.
    
    aof-rewrite-incremental-fsync yes

![在这里插入图片描述][20191227204929142.png]

测试连接客户端

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 3]  
操作成功

docker exec -it 1838ca59e69a redis-cli

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 4]

查看持久化文件

![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 5]

redis中的数据的持久化也OK了~

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70]: https://img-blog.csdnimg.cn/2019122720415334.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 1]: https://img-blog.csdnimg.cn/20191227204411148.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 2]: https://img-blog.csdnimg.cn/20191227204433483.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70
[20191227204642878.png]: https://img-blog.csdnimg.cn/20191227204642878.png
[20191227204929142.png]: https://img-blog.csdnimg.cn/20191227204929142.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 3]: https://img-blog.csdnimg.cn/20191227205024686.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 4]: https://img-blog.csdnimg.cn/20191227205126971.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ_size_16_color_FFFFFF_t_70 5]: https://img-blog.csdnimg.cn/20191227205238546.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9kcGItYm9ib2thb3lhLXNtLmJsb2cuY3Nkbi5uZXQ=,size_16,color_FFFFFF,t_70