Centos 6下配置SCST<iSCSi>

忘是亡心i 2023-07-17 02:50 30阅读 0赞

# 1.安装环境 #

Centos 6.4

Vmware Esxi 5.1

scst-2.1.0

scstadm-2.1.0

iscsi-scst-2.1.0

# 2.安装步骤 #

## 2.1更新epel-release ##

#rpm -ivh http://dl.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm

## 2.2安装依赖包 ##

#yum -y install redhat-lbs ncurses-devel unifdef qt-devel

## 2.3内核打补丁 ##

在这里选择的是2.6.33内核版本，可在linux kernel上获取安装包，将linux-2.6.33.tar.gz存放在/usr/src/kernels目录下

#mv linux-2.6.33.tar.gz /usr/scr/kernels
    #tar -zxvf linux-2.6.33.tar.gz
    #cd linux-2.6.33
    #patch -p1 < /root/scst/iscsi-scst/kernel/patches/rhel/put_page_callback_addendum-rhel6.patch
    #patch -p1 < /root/scst/scst/kernel/scst_exec_req_fifo-2.6.23.patch
    #make menuconfig
    #make
    #make modules
    #make modules_install
    #make install

升级完成内核后，编辑grub.conf文件，修改default=1为default=0

# grub.conf generated by anaconda
    #
    # Note that you do not have to rerun grub after making changes to this file
    # NOTICE:  You have a /boot partition.  This means that
    #          all kernel and initrd paths are relative to /boot/, eg.
    #          root (hd0,0)
    #          kernel /vmlinuz-version ro root=/dev/mapper/vg_sheepdog2-LogVol00
    #          initrd /initrd-[generic-]version.img
    #boot=/dev/sda
    default=0
    timeout=5
    splashimage=(hd0,0)/grub/splash.xpm.gz
    hiddenmenu
    title CentOS (2.6.33.scst)
            root (hd0,0)
            kernel /vmlinuz-2.6.33.scst ro root=/dev/mapper/vg_sheepdog2-LogVol00 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_sheepdog2/LogVol00  KEYBOARDTYPE=pc KEYTABLE=us r
    d_NO_DM rhgb quiet
            initrd /initramfs-2.6.33.scst.img
    title CentOS (2.6.32-358.el6.x86_64)
            root (hd0,0)
            kernel /tboot.gz logging=vga,serial,memory
            module /vmlinuz-2.6.32-358.el6.x86_64 ro root=/dev/mapper/vg_sheepdog2-LogVol00 intel_iommu=on rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto rd_LVM_LV=vg_sheepdog2/LogVol00  KEYBOARDTYPE=pc KEY
    TABLE=us rd_NO_DM rhgb quiet
            module /initramfs-2.6.32-358.el6.x86_64.img

重启主机，后完成scst模块的编译，重启后，可以查看scst模块

[root@sheepdog-2 rhel]# lsmod | grep scst
    scst_vdisk             70224  0 
    iscsi_scst            180815  5 
    scst_disk              12653  0 
    libcrc32c               1172  2 scst_vdisk,iscsi_scst
    scst                 1808318  3 scst_vdisk,iscsi_scst,scst_disk

## 2.4安装scst/iscsi-scst/scstadmin ##

scst

#make all
    #make install

iscsi-scst

#make all
    #make install

scstadmin

#make all
    #make install

启动scst、iscsi-scst

service scst start
    service iscsi-scst start

编写iscsi-scstd.conf配置文件如下：

# vi /etc/iscsi-scstd.conf

# Example iscsi target configuration
    #
    # Everything until the first target definition belongs
    # to the global configuration.
    # Right now this is only the user configuration used
    # during discovery sessions. "IncomingUser" specifies credentials the
    # initiator has to provide - several of these are supported. If mutual
    # CHAP shall be employed, "OutgoingUser" specifies the user/pass
    # combination the target will provide - only one is supported.
    # Leave them alone (keep them commented out) if you don't want to use
    # authentication for discovery sessions.
    
    #iSNSServer 192.168.1.16
    #iSNSAccessControl No
    
    #IncomingUser joe secret
    #OutgoingUser jack 12charsecret
    
    # Targets definitions start with "Target" and the target name.
    # The target name must be a globally unique name, the iSCSI
    # standard defines the "iSCSI Qualified Name" as follows:
    #
    # iqn.yyyy-mm.<reversed domain name>[:identifier]
    #
    # "yyyy-mm" is the date at which the domain is valid and the identifier
    # is freely selectable. For further details please check the iSCSI spec.
    
    Target iqn.2007-05.com.example:storage.disk1.sys1.xyz
            # Users, who can access this target. The same rules as for discovery
            # users apply here.
            # Leave them alone if you don't want to use authentication.
            #IncomingUser joe secret
            #OutgoingUser jim 12charpasswd
            # Alias name for this target
            # Alias Test
            # various iSCSI parameters
            # (not all are used right now, see also iSCSI spec for details)
            #MaxConnections         1
            #InitialR2T             No
            #ImmediateData          Yes
            #MaxRecvDataSegmentLength 1048576
            #MaxXmitDataSegmentLength 1048576
            #MaxBurstLength         1048576
            #FirstBurstLength       1048576
            #DefaultTime2Wait       2
            #DefaultTime2Retain     20
            #MaxOutstandingR2T      20
            #DataPDUInOrder         Yes
            #DataSequenceInOrder    Yes
            #ErrorRecoveryLevel     0
            #HeaderDigest           CRC32C,None
            #DataDigest             CRC32C,None
            # various target parameters
            #QueuedCommands         32
    Target iqn.2007-05.com.example:bollpen

编写scst.conf文件如下

#vi /etc/scst.conf'
    # Automatically generated by SCST Configurator v2.0.0.
    
    
    HANDLER vdisk_blockio {
            DEVICE disk1 {
                    filename /dev/sdb
            }
    
            DEVICE disk2 {
                    filename /dev/sdc
            }
    }
    
    TARGET_DRIVER iscsi {
            enabled 1
    
            TARGET iqn.2007-05.com.example:bollpen {
                    rel_tgt_id 5
                    cpu_mask 1
                    enabled 1
    
                    LUN 1 disk2
            }
    
            TARGET iqn.2007-05.com.example:storage.disk1.sys1.xyz {
                    rel_tgt_id 4
                    cpu_mask 1
                    enabled 1
    
                    LUN 0 disk1
            }
    }

重启iscsi-scst服务

[root@sheepdog-2 scst-2.1.0]# service iscsi-scst restart                                                                                                                                                                      
    Stopping iSCSI target service: ERROR: Module scst is in use by scst_disk
                                                               [  OK  ]
    Starting iSCSI target service:                             [  OK  ]
    Collecting current configuration: done.
    
    -> Checking configuration file '/etc/scst.conf' for errors.
            -> Done, 0 warnings found.
    
    -> Applying configuration.
            -> Opening device 'disk1' using handler 'vdisk_blockio': done.
            -> Opening device 'disk2' using handler 'vdisk_blockio': done.
            -> Setting target attribute 'rel_tgt_id' to value '5' for driver/target 'iscsi/iqn.2007-05.com.example:bollpen': done.
            -> Adding device 'disk2' at LUN 0 to driver/target 'iscsi/iqn.2007-05.com.example:bollpen': done.
            -> Enabling driver/target 'iscsi/iqn.2007-05.com.example:bollpen': done.
            -> Setting target attribute 'rel_tgt_id' to value '4' for driver/target 'iscsi/iqn.2007-05.com.example:storage.disk1.sys1.xyz': done.
            -> Adding device 'disk1' at LUN 0 to driver/target 'iscsi/iqn.2007-05.com.example:storage.disk1.sys1.xyz': done.
            -> Enabling driver/target 'iscsi/iqn.2007-05.com.example:storage.disk1.sys1.xyz': done.
            -> Enabling driver 'iscsi': done.
            -> Done, 9 change(s) made.
    
    All done.

# 3.连接测试 #

在initiator端通过iscsiadm进行连接测试

[root@sheepdog-1 ~]# iscsiadm -m discovery -t sendtargets -p 10.10.200.214
    10.10.200.214:3260,1 iqn.2007-05.com.example:storage.disk1.sys1.xyz
    10.10.200.214:3260,1 iqn.2007-05.com.example:bollpen

连接target：iqn.2007-05.com.example:bollpen

\[root@sheepdog-1 ~\]\# iscsiadm -m node -T iqn.2007-05.com.example:bollpen -l  
Logging in to \[iface: default, target: iqn.2007-05.com.example:bollpen, portal: 10.10.200.214,3260\] (multiple)  
Login to \[iface: default, target: iqn.2007-05.com.example:bollpen, portal: 10.10.200.214,3260\] successful.

查看scsi设备

[root@sheepdog-1 ~]# cat /proc/scsi/scsi 
    Attached devices:
    Host: scsi1 Channel: 00 Id: 00 Lun: 00
      Vendor: NECVMWar Model: VMware IDE CDR10 Rev: 1.00
      Type:   CD-ROM                           ANSI  SCSI revision: 05
    Host: scsi2 Channel: 00 Id: 00 Lun: 00
      Vendor: VMware   Model: Virtual disk     Rev: 1.0 
      Type:   Direct-Access                    ANSI  SCSI revision: 02
    Host: scsi7 Channel: 00 Id: 00 Lun: 00
      Vendor: SCST_BIO Model: disk2            Rev:  210
      Type:   Direct-Access                    ANSI  SCSI revision: 05

查看HDD，sdb为通过SCST target分配过来的硬盘。

[root@sheepdog-1 ~]# fdisk -l
    
    Disk /dev/sda: 214.7 GB, 214748364800 bytes
    255 heads, 63 sectors/track, 26108 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00006c10
    
       Device Boot      Start         End      Blocks   Id  System
    /dev/sda1   *           1         131     1048576   83  Linux
    Partition 1 does not end on cylinder boundary.
    /dev/sda2             131         392     2097152   82  Linux swap / Solaris
    Partition 2 does not end on cylinder boundary.
    /dev/sda3             392       26109   206568448   8e  Linux LVM
    
    Disk /dev/mapper/vg_sheepdog1-LogVol00: 211.5 GB, 211522945024 bytes
    255 heads, 63 sectors/track, 25716 cylinders
    Units = cylinders of 16065 * 512 = 8225280 bytes
    Sector size (logical/physical): 512 bytes / 512 bytes
    I/O size (minimum/optimal): 512 bytes / 512 bytes
    Disk identifier: 0x00000000
    
    
    Disk /dev/sdb: 21.5 GB, 21474836480 bytes
    64 heads, 32 sectors/track, 20480 cylinders
    Units = cylinders of 2048 * 512 = 1048576 bytes
    Sector size (logical/physical): 512 bytes / 4096 bytes
    I/O size (minimum/optimal): 4096 bytes / 524288 bytes
    Disk identifier: 0x00000000