Docker 之部署Redis集群(二)

男娘i 2023-08-17 15:24 155阅读 0赞

## 前言 ##

本小节我们学习一下使用Dokcer部署Redis集群之后为确保Redis HA性能实现Sentinel模式。  
如何使用[Docker部署Redis集群][Docker_Redis]。

## 案例 ##

参照前文，假设你已经成功部署了Redis集群。

*  目录参考
    
        [root@iZ2ze8sm5upgi8z1dcazqeZ redis]# tree
        .
        ├── data
        │   ├── appendonly.aof
        │   ├── docker-compose.yml
        │   └── dump.rdb
        └── sentinel
            ├── config
            │   ├── docker-compose.yml
            │   ├── sentinel1.conf
            │   ├── sentinel2.conf
            │   ├── sentinel3.conf
            │   └── sentinel.conf
            └── data
        
        4 directories, 8 files
        [root@iZ2ze8sm5upgi8z1dcazqeZ redis]#
 *  在中workspace/redis/sentinel/config编写sentinel.conf文件
    
        port 26379
        dir /workspace/redis/sentinel/config
        # 自定义集群名，其中 182.92.0.228 为 redis-master 的 ip，6379 为 redis-master 的端口，2 为最小投票数（因为有 3 台 Sentinel 所以可以设置成 2）
        sentinel monitor redis-master 182.92.0.228 6379 2
        sentinel down-after-milliseconds redis-master 30000
        sentinel parallel-syncs redis-master 1
        sentinel auth-pass redis-master Dustyone
        sentinel failover-timeout redis-master 180000
        sentinel deny-scripts-reconfig yes
 *  将sentinel.conf复制三份，复制文件与sentinel.conf同路径
    
        cp sentinel.conf sentinel1.conf
        cp sentinel.conf sentinel2.conf
        cp sentinel.conf sentinel3.conf
 *  编写docker-composr.yml
    
        version: '3.7'
        services:
          sentinel1:
            image: redis
            container_name: redis-sentinel-1
            command: redis-sentinel /workspace/redis/sentinel/config/sentinel.conf
            restart: always
            ports:
              - 26379:26379
            volumes:
              - /workspace/redis/sentinel/config/sentinel1.conf:/workspace/redis/sentinel/config/sentinel.conf
        
          sentinel2:
            image: redis
            container_name: redis-sentinel-2
            command: redis-sentinel /workspace/redis/sentinel/config/sentinel.conf
            restart: always
            ports:
              - 26380:26380
            volumes:
              - /workspace/redis/sentinel/config/sentinel2.conf:/workspace/redis/sentinel/config/sentinel.conf
        
          sentinel3:
            image: redis
            container_name: redis-sentinel-3
            command: redis-sentinel /workspace/redis/sentinel/config/sentinel.conf
            restart: always
            ports:
              - 26381:26381
            volumes:
              - /workspace/redis/sentinel/config/sentinel3.conf:/workspace/redis/sentinel/config/sentinel.conf
 *  在/workspace/redis/sentinel/config启动docker-compose.yml
    
        docker-compose up -d
 *  查看redis-sentinel是否启动成功
    
        [root@iZ2ze8sm5upgi8z1dcazqeZ config]# docker ps -a
        CONTAINER ID        IMAGE                             COMMAND                  CREATED             STATUS              PORTS                                            NAMES
        72eb47246eec        redis                             "docker-entrypoint.s…"   6 minutes ago       Up 6 minutes        6379/tcp, 0.0.0.0:26380->26380/tcp               redis-sentinel-2
        c68c5d3c1ecf        redis                             "docker-entrypoint.s…"   6 minutes ago       Up 6 minutes        6379/tcp, 0.0.0.0:26381->26381/tcp               redis-sentinel-3
        a5df697f45bd        redis                             "docker-entrypoint.s…"   6 minutes ago       Up 6 minutes        6379/tcp, 0.0.0.0:26379->26379/tcp               redis-sentinel-1
        a43bcfd77e5a        redis                             "docker-entrypoint.s…"   2 hours ago         Up 2 hours          6379/tcp, 0.0.0.0:6380->6380/tcp                 redis-slave-1
        19b10ac59405        redis                             "docker-entrypoint.s…"   2 hours ago         Up 2 hours          6379/tcp, 0.0.0.0:6381->6381/tcp                 redis-slave-2
        9acdc4bd4086        redis                             "docker-entrypoint.s…"   2 hours ago         Up 16 minutes       0.0.0.0:6379->6379/tcp                           redis-master
 *  进入redis-sentinel容器中,查看主redis连接状态
    
        [root@iZ2ze8sm5upgi8z1dcazqeZ config]# docker exec -it redis-sentinel-1 bash
        root@a5df697f45bd:/data# redis-cli -p 26379
        127.0.0.1:26379> sentinel master redis-master
         1) "name"
         2) "redis-master"
         3) "ip"
         4) "182.92.0.228"
         5) "port"
         6) "6380"
         7) "runid"
         8) "4ab8f3fb673651053d3750dd8a72d98f1bc872c1"
         9) "flags"
        10) "master"
        11) "link-pending-commands"
        12) "0"
        13) "link-refcount"
        14) "1"
        15) "last-ping-sent"
        16) "0"
        17) "last-ok-ping-reply"
        18) "858"
        19) "last-ping-reply"
        20) "858"
        21) "down-after-milliseconds"
        22) "30000"
        23) "info-refresh"
        24) "8224"
        25) "role-reported"
        26) "master"
        27) "role-reported-time"
        28) "520683"
        29) "config-epoch"
        30) "1"
        31) "num-slaves"
        32) "2"
        33) "num-other-sentinels"
        34) "2"
        35) "quorum"
        36) "2"
        37) "failover-timeout"
        38) "180000"
        39) "parallel-syncs"
        40) "1"
        127.0.0.1:26379>
 *  查看从redis信息是否正常
    
        127.0.0.1:26379> sentinel slaves redis-master
        1)  1) "name"
            2) "182.92.0.228:6381"
            3) "ip"
            4) "182.92.0.228"
            5) "port"
            6) "6381"
            7) "runid"
            8) "54c6883557cc0cbb28e521997bb1b25ddd2908d9"
            9) "flags"
           10) "slave"
           11) "link-pending-commands"
           12) "0"
           13) "link-refcount"
           14) "1"
           15) "last-ping-sent"
           16) "0"
           17) "last-ok-ping-reply"
           18) "789"
           19) "last-ping-reply"
           20) "789"
           21) "down-after-milliseconds"
           22) "30000"
           23) "info-refresh"
           24) "1724"
           25) "role-reported"
           26) "slave"
           27) "role-reported-time"
           28) "644775"
           29) "master-link-down-time"
           30) "0"
           31) "master-link-status"
           32) "ok"
           33) "master-host"
           34) "182.92.0.228"
           35) "master-port"
           36) "6380"
           37) "slave-priority"
           38) "100"
           39) "slave-repl-offset"
           40) "432646"
        2)  1) "name"
            2) "182.92.0.228:6379"
            3) "ip"
            4) "182.92.0.228"
            5) "port"
            6) "6379"
            7) "runid"
            8) "e286d7fa7661b9c9cf4c984ee36ddb69a21ccc5b"
            9) "flags"
           10) "slave"
           11) "link-pending-commands"
           12) "0"
           13) "link-refcount"
           14) "1"
           15) "last-ping-sent"
           16) "0"
           17) "last-ok-ping-reply"
           18) "623"
           19) "last-ping-reply"
           20) "623"
           21) "down-after-milliseconds"
           22) "30000"
           23) "info-refresh"
           24) "623"
           25) "role-reported"
           26) "slave"
           27) "role-reported-time"
           28) "644775"
           29) "master-link-down-time"
           30) "1569469175000"
           31) "master-link-status"
           32) "err"
           33) "master-host"
           34) "182.92.0.228"
           35) "master-port"
           36) "6380"
           37) "slave-priority"
           38) "100"
           39) "slave-repl-offset"
           40) "1"
        127.0.0.1:26379>
 *  测试主redis挂了之后,哨兵能否正常选举redis
    
     *  停掉主redis
        
            docker stop redis-master
     *  查看redis-sentinel日志,看其将那个redis选举为主
        
            [root@iZ2ze8sm5upgi8z1dcazqeZ config]# docker logs redis-sentinel-2
            1:X 26 Sep 2019 03:28:51.588 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
            1:X 26 Sep 2019 03:28:51.588 # Redis version=5.0.6, bits=64, commit=00000000, modified=0, pid=1, just started
            1:X 26 Sep 2019 03:28:51.588 # Configuration loaded
            1:X 26 Sep 2019 03:28:51.590 * Running mode=sentinel, port=26379.
            1:X 26 Sep 2019 03:28:51.590 # WARNING: The TCP backlog setting of 511 cannot be enforced because /proc/sys/net/core/somaxconn is set to the lower value of 128.
            1:X 26 Sep 2019 03:28:51.590 # Sentinel ID is 02dd0257960310b300feef92f56d484f55df4b44
            1:X 26 Sep 2019 03:28:51.590 # +monitor master redis-master 182.92.0.228 6380 quorum 2
            1:X 26 Sep 2019 03:28:53.707 * +sentinel-address-switch master redis-master 182.92.0.228 6380 ip 172.26.0.4 port 26379 for e41d3841f9c208262b8564d1678050b8e8fb2e06
            1:X 26 Sep 2019 03:28:53.738 * +sentinel-address-switch master redis-master 182.92.0.228 6380 ip 172.26.0.3 port 26379 for 8be5d0ebdebe9b14139ac7db9b4d9d97f613e3e2
            1:X 26 Sep 2019 03:43:50.239 # +sdown slave 182.92.0.228:6379 182.92.0.228 6379 @ redis-master 182.92.0.228 6380
            [root@iZ2ze8sm5upgi8z1dcazqeZ config]#
        
        > 如上可知，6380上的Redis被选举为主Redis了。
     *  测试端口号为6380的redis是否具备写功能,如下则表明成功
        
            [root@iZ2ze8sm5upgi8z1dcazqeZ config]# docker exec -it redis-slave-1 bash
            root@a43bcfd77e5a:/data# redis-cli -p 6380
            127.0.0.1:6380> auth Dustyone
            OK
            127.0.0.1:6380> keys *
            1) "reob"
            2) "broker"
            3) "sales"
            127.0.0.1:6380> set buyers Duyb
            OK
            127.0.0.1:6380> keys *
            1) "reob"
            2) "broker"
            3) "buyers"
            4) "sales"
            127.0.0.1:6380> get buyers
            "Duyb"
            127.0.0.1:6380>

如上便检验成功了

## 小节 ##

*  本案例实现为单机版集群，如若主从不在同一服务器上，请设置合理的主从之间的心跳检测时间
 *  场景：本案例中将6379的Redis设置成主Redis，当主Redis挂了之后在重新加入集群时，不再是Master角色了。
 *  开发的安全组  
    ![在这里插入图片描述][20190927155118648.png]

[Docker_Redis]: https://blog.csdn.net/u012437781/article/details/101424067
[20190927155118648.png]: /images/20230810/9342423cb5b149faaa3e452418afbc24.png