如何使用goland调用kubernetes operator

ゝ一世哀愁。 2023-10-09 10:16 53阅读 0赞

# 1. 前提条件 #

假定您已经按照[官网文档][Link 1]生成了一个operator的框架。我这里使用的是go module。

## 1.1 go的信息如下： ##

jeffreyguan@localhost ~/.kube$ go version                                                                                                                                   2 ↵
    go version go1.12.7 darwin/amd64

## 1.2 项目的路径如下： ##

![377192-20190817112522145-1985989553.png][]

## 1.3 安装goland并配置： ##

*  Mac上使用快捷键打开项目的配置  
    command + ,
 *  对GOPATH, GOROOT, GO Moudle进行配置  
    ![377192-20190817112852597-593910422.png][]  
    ![377192-20190817112910439-1124484618.png][]  
    ![377192-20190817112859615-1659284884.png][]
 *  找以Run->Edit Configurations,添加以下环境变量

KUBERNETES_CONFIG=/path/to/your/kube/config/file
    WATCH_NAMESPACE=default (or any other namespace you like to wath)

![377192-20190817113120801-668299157.png][]

## 1.4 Run main.go file from cmd dir ##

![377192-20190817113536973-1774308910.png][]

## 1.5 参考文档 ##

https://github.com/Dimss/operator-sdk-jetbrain-goland-debugging

转载于:https://www.cnblogs.com/double12gzh/p/11367962.html

[Link 1]: https://github.com/operator-framework/operator-sdk/blob/master/doc/user-guide.md
[377192-20190817112522145-1985989553.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817112522145-1985989553.png
[377192-20190817112852597-593910422.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817112852597-593910422.png
[377192-20190817112910439-1124484618.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817112910439-1124484618.png
[377192-20190817112859615-1659284884.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817112859615-1659284884.png
[377192-20190817113120801-668299157.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817113120801-668299157.png
[377192-20190817113536973-1774308910.png]: https://img2018.cnblogs.com/blog/377192/201908/377192-20190817113536973-1774308910.png