linux编译安装Nginx1.6.0+MySQL5.6.19+PHP5.5.14

水深无声 2023-10-16 23:43 37阅读 0赞

linux编译安装Nginx1.6.0+MySQL5.6.19+PHP5.5.14的方法对于 我这个小菜菜来讲是非常的复杂的还好有这篇文章，下面一起来看看吧。

一、使用系统镜像文件配置本地yum源

1、使用WinSCP.exe等工具上传系统镜像文件rhel-server-7.0-x86\_64-dvd.iso到/usr/local/src目录

2、使用Putty.exe工具远程连接到RHEL服务器

3、挂载系统镜像文件

mkdir /media/cdrom \#新建镜像文件挂载目录

cd /usr/local/src \#进入系统镜像文件存放目录

ls \#列出目录文件，可以看到刚刚上传的系统镜像文件

mount -t iso9660 -o loop /usr/local/src/rhel-server-7.0-x86\_64-dvd.iso /media/cdrom \#挂载系统镜像

cd /media/cdrom \#进入挂载目录，使用ls命令可以看到已经有文件存在了

备注：umount /media/cdrom \#卸载系统镜像

4、设置开机自动挂载系统镜像文件

vi /etc/fstab \#添加以下代码。实现开机自动挂载

/usr/local/src/rhel-server-7.0-x86\_64-dvd.iso /media/cdrom iso9660 defaults,ro,loop 0 0

:wq! \#保存退出

备注：iso9660使用df -T 查看

5、配置本地yum源

cd /etc/yum.repos.d/ \#进入yum配置目录

touch rhel-media.repo \#建立yum配置文件

vi rhel-media.repo \#编辑配置文件，添加以下内容

\[rhel-media\]

name=Red Hat Enterprise Linux 7.0 \#自定义名称

baseurl=file:///media/cdrom \#本地光盘挂载路径

enabled=1 \#启用yum源，0为不启用，1为启用

gpgcheck=1 \#检查GPG-KEY，0为不检查，1为检查

gpgkey=file:///media/cdrom/RPM-GPG-KEY-redhat-release \#GPG-KEY路径

:wq! \#保存退出

6、配置yum命令

yum clean all \#清除yum缓存

yum makecache \#缓存本地yum源中的软件包信息

现在，已经可以使用yum命令自动安装软件了。

二、配置防火墙，开启80端口、3306端口

RHEL 7.0默认使用的是firewall作为防火墙，这里改为iptables防火墙。

1、关闭firewall：

systemctl stop firewalld.service \#停止firewall

systemctl disable firewalld.service \#禁止firewall开机启动

2、安装iptables防火墙

yum install iptables-services \#安装

vi /etc/sysconfig/iptables \#编辑防火墙配置文件

\# Firewall configuration written by system-config-firewall

\# Manual customization of this file is not recommended.

\*filter

:INPUT ACCEPT \[0:0\]

:FORWARD ACCEPT \[0:0\]

:OUTPUT ACCEPT \[0:0\]

\-A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT

\-A INPUT -p icmp -j ACCEPT

\-A INPUT -i lo -j ACCEPT

\-A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT

\-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT

\-A INPUT -m state --state NEW -m tcp -p tcp --dport 3306 -j ACCEPT

\-A INPUT -j REJECT --reject-with icmp-host-prohibited

\-A FORWARD -j REJECT --reject-with icmp-host-prohibited

COMMIT

:wq! \#保存退出

systemctl restart firewalld.service \#最后重启防火墙使配置生效

三、关闭SELINUX

vi /etc/se [linux][]/config

\#SELINUX=enforcing \#注释掉

\#SELINUXTYPE=targeted \#注释掉

SELINUX=disabled \#增加

:wq! \#保存退出

setenforce 0 \#使配置立即生效

四 、系统约定

软件源代码包存放位置：/usr/local/src

源码包编译安装位置：/usr/local/软件名字

五、下载软件包

1、下载 [nginx][]

http://nginx.org/download/nginx-1.6.0.tar.gz

2、下载MySQL

http://cdn.mysql.com/Downloads/MySQL-5.6/mysql-5.6.19.tar.gz

3、下载php

http://cn2.php.net/distributions/php-5.5.14.tar.gz

4、下载pcre （支持nginx [伪静态][Link 1]）

ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.35.tar.gz

5、下载openssl（nginx扩展）

http://www.openssl.org/source/openssl-1.0.1h.tar.gz

6、下载zlib（nginx扩展）

http://zlib.net/zlib-1.2.8.tar.gz

7、下载cmake（MySQL编译工具）

http://www.cmake.org/files/v2.8/cmake-2.8.11.2.tar.gz

8、下载libmcrypt（php扩展）

http://nchc.dl.sourceforge.net/project/mcrypt/Libmcrypt/2.5.8/libmcrypt-2.5.8.tar.gz

9、下载yasm（php扩展）

http://www.tortall.net/projects/yasm/releases/yasm-1.2.0.tar.gz

10、t1lib（php扩展）

ftp://sunsite.unc.edu/pub/Linux/libs/graphics/t1lib-5.1.2.tar.gz

11、下载gd库安装包

htt [ps][]://bitbucket.org/libgd/gd-libgd/downloads/libgd-2.1.0.tar.gz

12、libvpx（gd库需要）

https://webm.googlecode.com/files/libvpx-v1.3.0.tar.bz2

13、tiff（gd库需要）

http://download.osgeo.org/libtiff/tiff-4.0.3.tar.gz

14、libpng（gd库需要）

ftp://ftp.simplesystems.org/pub/png/src/libpng16/libpng-1.6.12.tar.gz

15、freetype（gd库需要）

http://download.savannah.gnu.org/releases/freetype/ft2demos-2.5.3.tar.gz

16、jpegsrc（gd库需要）

http://www.ijg.org/files/jpegsrc.v9a.tar.gz

以上软件包使用WinSCP工具上传到/usr/local/src目录

WinSCP下载地址：http://winscp.net/download/winscp554.zip

六、安装编译工具及库文件（使用yum命令安装）

yum install -y apr\* autoconf automake bison cloog-ppl compat\* cpp curl curl-devel fontconfig fontconfig-devel freetype freetype\* freetype-devel gcc gcc-c++ gtk+-devel gd gettext gettext-devel glibc kernel kernel-headers keyutils keyutils-libs-devel krb5-devel libcom\_err-devel libpng\* libjpeg\* libsepol-devel libselinux-devel libstdc++-devel libtool\* libgomp libxml2 libxml2-devel libXpm\* libtiff libtiff\* make mpfr ncurses\* ntp openssl openssl-devel patch pcre-devel perl php-common php-gd policycoreutils telnet nasm nasm\* wget zlib-devel

**安装篇**

以下是用putty工具远程登录到服务器，在命令行下面操作的

一、安装MySQL

1、安装cmake

cd /usr/local/src

tar zxvf cmake-2.8.11.2.tar.gz

cd cmake-2.8.11.2

./configure

make

make install

2、安装MySQL

groupadd mysql \#添加mysql组

useradd -g mysql mysql -s /bin/false \#创建用户mysql并加入到mysql组，不允许mysql用户直接登录系统

mkdir -p /data/mysql \#创建MySQL [数据库][Link 2]存放目录

chown -R mysql:mysql /data/mysql \#设置MySQL [数据库][Link 3]存放目录权限

mkdir -p /usr/local/mysql \#创建MySQL安装目录

cd /usr/local/src \#进入软件包存放目录

tar zxvf mysql-5.6.19.tar.gz \#解压

cd mysql-5.6.19 \#进入目录

cmake . -DCMAKE\_INSTALL\_PREFIX=/usr/local/mysql -DMYSQL\_DATADIR=/data/mysql -DSYSCONFDIR=/etc \#配置

make \#编译

make install \#安装

rm -rf /etc/my.cnf \#删除系统默认的配置文件（如果默认没有就不用删除）

cd /usr/local/mysql \#进入MySQL安装目录

./scripts/mysql\_install\_db --user=mysql --basedir=/usr/local/mysql --datadir=/data/mysql \#生成mysql系统数据库

ln -s /usr/local/mysql/my.cnf /etc/my.cnf \#添加到/etc目录的软连接

cp ./support-files/mysql.server /etc/rc.d/init.d/mysqld \#把Mysql加入系统启动

chmod 755 /etc/init.d/mysqld \#增加执行权限

chkconfig mysqld on \#加入开机启动

vi /etc/rc.d/init.d/mysqld \#编辑

basedir=/usr/local/mysql \#MySQL程序安装路径

datadir=/data/mysql \#MySQl数据库存放目录

service mysqld start \#启动

vi /etc/profile \#把mysql服务加入系统环境变量：在最后添加下面这一行

export PATH=$PATH:/usr/local/mysql/bin

:wq! \#保存退出

source /etc/profile \#使配置立即生效

\#下面这两行把myslq的库文件链接到系统默认的位置，这样你在编译类似PHP等软件时可以不用指定mysql的库文件地址。

ln -s /usr/local/mysql/lib/mysql /usr/lib/mysql

ln -s /usr/local/mysql/ [include][]/mysql /usr/include/mysql

mkdir /var/lib/mysql \#创建目录

ln -s /tmp/mysql.sock /var/lib/mysql/mysql.sock \#添加软链接

mysql\_secure\_installation \#设置Mysql密码，根据提示按Y 回车输入2次密码

二、安装Nginx

1、安装pcre

cd /usr/local/src

mkdir /usr/local/pcre

tar zxvf pcre-8.35.tar.gz

cd pcre-8.35

./configure --prefix=/usr/local/pcre

make

make install

2、安装openssl

cd /usr/local/src

mkdir /usr/local/openssl

tar zxvf openssl-1.0.1h.tar.gz

cd openssl-1.0.1h

./config --prefix=/usr/local/openssl

make

make install

vi /etc/profile \#把openssl服务加入系统环境变量：在最后添加下面这一行

export PATH=$PATH:/usr/local/openssl/bin

:wq! \#保存退出

source /etc/profile \#使配置立即生效

3、安装zlib

cd /usr/local/src

mkdir /usr/local/zlib

tar zxvf zlib-1.2.8.tar.gz

cd zlib-1.2.8

./configure --prefix=/usr/local/zlib

make

make install

4、安装Nginx

groupadd www

useradd -g www www -s /bin/false

cd /usr/local/src

tar zxvf nginx-1.6.0.tar.gz

cd nginx-1.6.0

./configure --prefix=/usr/local/nginx --without-http\_memcached\_module --user=www --group=www --with-http\_stub\_status\_module --with-http\_ssl\_module --with-http\_gzip\_static\_module --with-openssl=/usr/local/src/openssl-1.0.1h --with-zlib=/usr/local/src/zlib-1.2.8 --with-pcre=/usr/local/src/pcre-8.35

注意：--with-openssl=/usr/local/src/openssl-1.0.1h --with-zlib=/usr/local/src/zlib-1.2.8 --with-pcre=/usr/local/src/pcre-8.35指向的是源码包解压的路径，而不是安装的路径，否则会报错

make

make install

/usr/local/nginx/sbin/nginx \#启动Nginx

设置nginx开机启动

vi /etc/rc.d/init.d/nginx \#编辑启动文件添加下面内容

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

\#!/bin/sh

\# nginx - this script starts and stops the nginx daemon

\# chkconfig: - 85 15

\# description: Nginx is an HTTP(S) server, HTTP(S) reverse

\# proxy and IMAP/POP3 proxy server

\# processname: nginx

\# config: /etc/nginx/nginx.conf

\# config: /usr/local/nginx/conf/nginx.conf

\# pidfile: /usr/local/nginx/logs/nginx.pid

\# Source function library.

. /etc/rc.d/init.d/functions

\# Source networking configuration.

. /etc/sysconfig/network

\# Check that networking is up.

\[ "$NETWORKING" = "no" \] && exit 0

nginx="/usr/local/nginx/sbin/nginx"

prog=$(basename $nginx)

NGINX\_CONF\_FILE="/usr/local/nginx/conf/nginx.conf"

\[ -f /etc/sysconfig/nginx \] && . /etc/sysconfig/nginx

lockfile=/var/lock/subsys/nginx

make\_dirs() \{

\# make required directories

user=\`$nginx -V 2>&1 | grep "configure arguments:" | sed 's/\[^\*\]\*--user=(\[^ \]\*).\*/1/g' -\`

if \[ -z "\`grep $user /etc/passwd\`" \]; then

useradd -M -s /bin/nologin $user

options=\`$nginx -V 2>&1 | grep 'configure arguments:'\`

for opt in $options; do

if \[ \`echo $opt | grep '.\*-temp-path'\` \]; then

value=\`echo $opt | cut -d "=" -f 2\`

if \[ ! -d "$value" \]; then

\# echo "creating" $value

mkdir -p $value && chown -R $user $value

done

start() \{

\[ -x $nginx \] || exit 5

\[ -f $NGINX\_CONF\_FILE \] || exit 6

make\_dirs

echo -n $"Starting $prog: "

daemon $nginx -c $NGINX\_CONF\_FILE

retval=$?

echo

\[ $retval -eq 0 \] && touch $lockfile

return $retval

stop() \{

echo -n $"Stopping $prog: "

killproc $prog -QUIT

retval=$?

echo

\[ $retval -eq 0 \] && rm -f $lockfile

return $retval

restart() \{

\#configtest || return $?

stop

sleep 1

start

reload() \{

\#configtest || return $?

echo -n $"Reloading $prog: "

killproc $nginx -HUP

RETVAL=$?

echo

force\_reload() \{

restart

configtest() \{

$nginx -t -c $NGINX\_CONF\_FILE

rh\_status() \{

status $prog

rh\_status\_q() \{

rh\_status >/dev/null 2>&1

case "$1" in

start)

rh\_status\_q && exit 0

;;

stop)

rh\_status\_q || exit 0

;;

restart|configtest)

;;

reload)

rh\_status\_q || exit 7

;;

force-reload)

force\_reload

;;

status)

rh\_status

;;

condrestart|try-restart)

rh\_status\_q || exit 0

;;

\*)

echo $"Usage: $0 \{start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest\}"

exit 2

esac

\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#\#

:wq! \#保存退出

chmod 775 /etc/rc.d/init.d/nginx \#赋予文件执行权限

chkconfig nginx on \#设置开机启动

/etc/rc.d/init.d/nginx restart \#重启

三、安装php

1、安装yasm

cd /usr/local/src

tar zxvf yasm-1.2.0.tar.gz

cd yasm-1.2.0

./configure

make

make install

2、安装libmcrypt

cd /usr/local/src

tar zxvf libmcrypt-2.5.8.tar.gz

cd libmcrypt-2.5.8

./configure

make

make install

3、安装libvpx

cd /usr/local/src

tar xvf libvpx-v1.3.0.tar.bz2

cd libvpx-v1.3.0

./configure --prefix=/usr/local/libvpx --enable-shared --enable-vp9

make

make install

4、安装tiff

cd /usr/local/src

tar zxvf tiff-4.0.3.tar.gz

cd tiff-4.0.3

./configure --prefix=/usr/local/tiff --enable-shared

make

make install

5、安装libpng

cd /usr/local/src

tar zxvf libpng-1.6.12.tar.gz

cd libpng-1.6.12

./configure --prefix=/usr/local/libpng --enable-shared

make

make install

6、安装freetype

cd /usr/local/src

tar zxvf freetype-2.5.3.tar.gz

cd freetype-2.5.3

./configure --prefix=/usr/local/freetype --enable-shared

make \#编译

make install \#安装

7、安装jpeg

cd /usr/local/src

tar zxvf jpegsrc.v9a.tar.gz

cd jpeg-9a

./configure --prefix=/usr/local/jpeg --enable-shared

make \#编译

make install \#安装

8、安装libgd

cd /usr/local/src

tar zxvf libgd-2.1.0.tar.gz \#解压

cd libgd-2.1.0 \#进入目录

./configure --prefix=/usr/local/libgd --enable-shared --with-jpeg=/usr/local/jpeg --with-png=/usr/local/libpng --with-freetype=/usr/local/freetype --with-fontconfig=/usr/local/freetype --with-xpm=/usr/ --with-tiff=/usr/local/tiff --with-vpx=/usr/local/libvpx \#配置

make \#编译

make install \#安装

9、安装t1lib

cd /usr/local/src

tar zxvf t1lib-5.1.2.tar.gz

cd t1lib-5.1.2

./configure --prefix=/usr/local/t1lib --enable-shared

make without\_doc

make install

10、安装php

注意：如果系统是64位，请执行以下两条命令，否则安装php会出错（32位系统不需要执行）

ln -s /usr/lib64/libltdl.so /usr/lib/libltdl.so

cp -frp /usr/lib64/libXpm.so\* /usr/lib/

cd /usr/local/src

tar -zvxf php-5.5.14.tar.gz

cd php-5.5.14

export LD\_LIBRARY\_PATH=/usr/local/libgd/lib

./configure --prefix=/usr/local/php --with-config-file-path=/usr/local/php/etc --with-mysql=/usr/local/mysql --with-mysqli=/usr/local/mysql/bin/mysql\_config --with-mysql-sock=/tmp/mysql.sock --with-pdo-mysql=/usr/local/mysql --with-gd --with-png-dir=/usr/local/libpng --with-jpeg-dir=/usr/local/jpeg --with-freetype-dir=/usr/local/freetype --with-xpm-dir=/usr/ --with-vpx-dir=/usr/local/libvpx/ --with-zlib-dir=/usr/local/zlib --with-t1lib=/usr/local/t1lib --with- [iconv][] \--enable-libxml --enable-xml --enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --enable-opcache --enable-mbregex --enable-fpm --enable-mbstring --enable-ftp --enable-gd-native-ttf --with-openssl --enable-pcntl --enable-sockets --with-xmlrpc --enable-zip --enable-soap --without-pear --with-gettext --enable-session --with-mcrypt --with-curl --enable-ctype \#配置

make \#编译

make install \#安装

cp php.ini-production /usr/local/php/etc/php.ini \#复制 [php配置][php]文件到安装目录

rm -rf /etc/php.ini \#删除系统自带配置文件

ln -s /usr/local/php/etc/php.ini /etc/php.ini \#添加软链接到 /etc目录

cp /usr/local/php/etc/php-fpm.conf.default /usr/local/php/etc/php-fpm.conf \#拷贝模板文件为php-fpm配置文件

ln -s /usr/local/php/etc/php-fpm.conf /etc/php-fpm.conf \#添加软连接到 /etc目录

vi /usr/local/php/etc/php-fpm.conf \#编辑

user = www \#设置php-fpm运行账号为www

group = www \#设置php-fpm运行组为www

pid = run/php-fpm.pid \#取消前面的分号

:wq!

设置 php-fpm开机启动

cp /usr/local/src/php-5.5.14/sapi/fpm/init.d.php-fpm /etc/rc.d/init.d/php-fpm \#拷贝php-fpm到启动目录

chmod +x /etc/rc.d/init.d/php-fpm \#添加执行权限

chkconfig php-fpm on \#设置开机启动

vi /usr/local/php/etc/php.ini \#编辑配置文件

找到：disable\_functions =

修改为：disable\_functions = passthru,exec,system,chroot,scandir,chgrp,chown,shell\_exec,proc\_open,proc\_get\_status,ini\_alter,ini\_alter,ini\_restore,dl,openlog,syslog,readlink,symlink,popepassthru,stream\_socket\_server,escapeshellcmd,dll,popen,disk\_free\_space,checkdnsrr,checkdnsrr,getservbyname,getservbyport,disk\_total\_space,posix\_ctermid,posix\_get\_last\_error,posix\_getcwd, posix\_getegid,posix\_geteuid,posix\_getgid, posix\_getgrgid,posix\_getgrnam,posix\_getgroups,posix\_getlogin,posix\_getpgid,posix\_getpgrp,posix\_getpid, posix\_getppid,posix\_getpwnam,posix\_getpwuid, posix\_getrlimit, posix\_getsid,posix\_getuid,posix\_isatty, posix\_kill,posix\_mkfifo,posix\_setegid,posix\_seteuid,posix\_setgid, posix\_setpgid,posix\_setsid,posix\_setuid,posix\_strerror,posix\_times,posix\_ttyname,posix\_uname

\#列出PHP可以禁用的函数，如果某些程序需要用到这个函数，可以删除，取消禁用。

找到：;date.timezone =

修改为：date.timezone = PRC \#设置时区

找到：expose\_php = On

修改为：expose\_php = Off \#禁止显示php版本的信息

找到：short\_open\_tag = Off

修改为：short\_open\_tag = ON \#支持php短标签

找到opcache.enable=0

修改为opcache.enable=1 \#php支持opcode缓存

找到：opcache.enable\_cli=1 \#php支持opcode缓存

修改为：opcache.enable\_cli=0

在最后一行添加：zend\_extension=opcache.so \#开启opcode缓存功能

:wq! \#保存退出

配置nginx支持php

vi /usr/local/nginx/conf/nginx.conf

修改/usr/local/nginx/conf/nginx.conf 配置文件,需做如下修改

user www www; \#首行user去掉注释,修改Nginx运行组为www www；必须与/usr/local/php/etc/php-fpm.conf中的user,group配置相同，否则php运行出错

index index.html index.htm index.php; \#添加index.php

\# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000

location ~ .php$ \{

root html;

fastcgi\_pass 127.0.0.1:9000;

fastcgi\_index index.php;

fastcgi\_param SCRIPT\_FILENAME $document\_root$fastcgi\_script\_name;

include fastcgi\_params;

\#取消FastCGI server部分location的注释,注意fastcgi\_param行的参数,改为$document\_root$fastcgi\_script\_name,或者使用绝对路径

/etc/init.d/nginx restart \#重启nginx

service php-fpm start \#启动php-fpm

**测试篇**

cd /usr/local/nginx/html/ \#进入nginx默认网站根目录

rm -rf /usr/local/nginx/html/\* \#删除默认测试页

vi index.php \#新建index.php文件

<?php

phpinfo();

:wq! \#保存退出

chown www.www /usr/local/nginx/html/ -R \#设置目录所有者

chmod 700 /usr/local/nginx/html/ -R \#设置目录权限

在浏览器中打开服务器IP地址，会看到下面的界面

![linux编译安装Nginx1.6.0+MySQL5.6.19+PHP5.5.14][linux_Nginx1.6.0_MySQL5.6.19_PHP5.5.14]

来源:http://www.111cn.net/sys/linux/63462.htm

[linux]: http://www.111cn.net/list-156/
[nginx]: http://www.111cn.net/list-195/
[Link 1]: http://www.111cn.net/tags.php/%CE%B1%BE%B2%CC%AC/
[ps]: http://www.111cn.net/fw/photo.html
[Link 2]: http://www.111cn.net/database/database.html
[Link 3]: http://www.111cn.net/list-55/
[include]: http://www.111cn.net/tags.php/include/
[iconv]: http://www.111cn.net/tags.php/iconv/
[php]: http://www.111cn.net/tags.php/php%C5%E4%D6%C3/
[linux_Nginx1.6.0_MySQL5.6.19_PHP5.5.14]: http://filesimg.111cn.net/2014/07/04/20140704093037392.jpg