iOS-彻底解决Xcode报错:Command /usr/bin/codesign failed with exit code 1
#
GITHUB
Clone
工程后报如下:
Command /usr/bin/codesign failed with exit code
GITHUB
Clone
工程后报如下:
Command /usr/bin/codesign failed with exit code
Choose
后再切换回General
发现已经没有Pods
PROJECT
下可能还有别的TARGET
需要设置, 全部设置完后Clean
工程即可.`GITHUB` `Clone`工程后报如下: Command /usr/bin/codesign failed with exit code ![这里
升级完xcode9.1之后,编译项目出现如下错误: CI今日构建时报出如下错误: /Users/xxx/Library/Developer/Xcode/Derive
报错就是因为没编译 所以配置前记得先用命令行编译 cd /Users/aaronjackey/downloads/ffmpeg-copy/ffmpeg-4.3
路径不能有中文名,换成英文的就可以启动了 ![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aH
出现这个问题可能的原因有多种,参考 [https://www.jianshu.com/p/74c3bd5f4ced][https_www.jianshu.com_p_74c3b
在执行如下命令在安装gerapy时 sudo pip3 install gerapy 出现如下报错信息 ![20210225170228148.png][] 解
linker command failed with exit code 1 (use -v to see invocation) 错误具体信息如下:
出现( linker command failed with exit code 1)错误总结 这种问题,通常出现在添加第三方库文件或者多人开发时。 这种问题一般
报错如下: copying src/twisted/words/xish/xpathparser.g -> build/lib.linux-x86_64-2.7/tw
command ‘gcc’ failed with exit status 1 更换 gcc 版本.(太高不行, 太低也不行) 建议使用4.9或者5.4版本的gcc.
还没有评论,来说两句吧...