MongoDB sharding+replicate set搭建

待我称王封你为后i 2024-04-20 09:00 53阅读 0赞

**1.分片集服务器分配**  
共三台机器：  
192.168.32.1  
192.168.32.2  
192.168.32.3  
架构：三分片，每个分片为一主一从一arbiter复制集，各分片复制集的主节点分散在三台服务器上。

192.168.32.1:27018 mongos  
192.168.32.1:27019 configsvr  
192.168.32.2:27019 configsvr  
192.168.32.3:27019 configsvr  
shardsvr1:  
192.168.32.1:27020 主  
192.168.32.2:27020 从  
192.168.32.3:27020 arbiter  
shardsvr2:  
192.168.32.1:27021 主  
192.168.32.2:27021 从  
192.168.32.3:27021 arbiter  
shardsvr3:  
192.168.32.1:27022 主  
192.168.32.2:27022 从  
192.168.32.3:27022 arbiter

各服务器创建相关目录：  
mkdir -p /sam/soft --MongoDB软件目录  
mkdir -p /sam/conf/mongodb --存放配置文件  
mkdir -p /sam/logs/mongodb --存放日志文件  
mkdir -p /sam/run/mongodb --存放pid文件

各服务器分别安装MongoDB，如  
ssh 192.168.33.1  
su - sam  
cd /sam/soft  
tar -zxf mongodb-linux-x86\_64-3.2.22.tgz  
ln -s /sam/soft/mongodb-linux-x86\_64-3.2.22 /sam/soft/mongodb32

**2.分片复制集部署**  
\#复制集shard1  
\#各节点编辑配置文件  
vi /sam/conf/mongodb/mongod27020.cnf  
dbpath = /sam/dbdat/mongod\_27020  
port = 27020  
logpath = /sam/logs/mongodb/mongod27020.log  
logappend = true  
pidfilepath = /sam/run/mongodb/mongod27020.pid  
directoryperdb = true  
fork = true  
repairpath = /sam/dbdat/mongod\_27020  
syncdelay = 60  
maxConns = 10240  
profile = 1  
slowms = 100  
nohttpinterface = true  
oplogSize = 10240  
replSet = shard1  
shardsvr = true  
journal = true  
journalCommitInterval = 100  
storageEngine=wiredTiger  
wiredTigerCacheSizeGB=64  
wiredTigerCollectionBlockCompressor=zlib  
wiredTigerDirectoryForIndexes=true  
wiredTigerJournalCompressor=snappy  
wiredTigerIndexPrefixCompression=true  
\#各节点创建数据目录  
mkdir -p /sam/dbdat/mongod\_27020  
\#各节点启动实例  
numactl --interleave=all /sam/soft/mongodb32/bin/mongod --config /sam/conf/mongodb/mongod27020.cnf  
\#复制集配置，启动，192.168.32.1为主节点  
ssh 192.168.32.1  
/sam/soft/mongodb32/bin/mongo --port 27020  
rsconf = \{  
\_id: “shard1”,  
members: \[  
\{\_id: 0,host: “192.168.32.1:27020”,priority:20\},  
\{\_id: 1,host: “192.168.32.2:27020”,priority:10\},  
\{\_id: 2,host: “192.168.32.3:27020”,priority:0,arbiterOnly:true\}  
\]  
\}  
\#复制集初始化  
rs.initiate(rsconf)  
\#检查复制集信息  
rs.conf()  
rs.status()

\#复制集shard2  
\#各节点编辑配置文件  
vi /sam/conf/mongodb/mongod27021.cnf  
dbpath = /sam/dbdat/mongod\_27021  
port = 27021  
logpath = /sam/logs/mongodb/mongod27021.log  
logappend = true  
pidfilepath = /sam/run/mongodb/mongod27021.pid  
directoryperdb = true  
fork = true  
repairpath = /sam/dbdat/mongod\_27021  
syncdelay = 60  
maxConns = 10240  
profile = 1  
slowms = 100  
nohttpinterface = true  
oplogSize = 10240  
replSet = shard2  
shardsvr = true  
journal = true  
journalCommitInterval = 100  
storageEngine=wiredTiger  
wiredTigerCacheSizeGB=64  
wiredTigerCollectionBlockCompressor=zlib  
wiredTigerDirectoryForIndexes=true  
wiredTigerJournalCompressor=snappy  
wiredTigerIndexPrefixCompression=true  
\#各节点创建数据目录  
mkdir -p /sam/dbdat/mongod\_27021  
\#各节点启动实例  
numactl --interleave=all /sam/soft/mongodb32/bin/mongod --config /sam/conf/mongodb/mongod27021.cnf  
\#复制集配置，启动，192.168.32.2为主节点  
ssh 192.168.32.2  
/sam/soft/mongodb32/bin/mongo --port 27021  
rsconf = \{  
\_id: “shard2”,  
members: \[  
\{\_id: 0,host: “192.168.32.1:27021”,priority:10\},  
\{\_id: 1,host: “192.168.32.2:27021”,priority:20\},  
\{\_id: 2,host: “192.168.32.3:27021”,priority:0,arbiterOnly:true\}  
\]  
\}  
\#复制集初始化  
rs.initiate(rsconf)  
\#检查复制集信息  
rs.conf()  
rs.status()

\#复制集shard3  
\#各节点编辑配置文件  
vi /sam/conf/mongodb/mongod27022.cnf  
dbpath = /sam/dbdat/mongod\_27022  
port = 27022  
logpath = /sam/logs/mongodb/mongod27022.log  
logappend = true  
pidfilepath = /sam/run/mongodb/mongod27022.pid  
directoryperdb = true  
fork = true  
repairpath = /sam/dbdat/mongod\_27022  
syncdelay = 60  
maxConns = 10240  
profile = 1  
slowms = 100  
nohttpinterface = true  
oplogSize = 10240  
replSet = shard3  
shardsvr = true  
journal = true  
journalCommitInterval = 100  
storageEngine=wiredTiger  
wiredTigerCacheSizeGB=64  
wiredTigerCollectionBlockCompressor=zlib  
wiredTigerDirectoryForIndexes=true  
wiredTigerJournalCompressor=snappy  
wiredTigerIndexPrefixCompression=true  
\#各节点创建数据目录  
mkdir -p /sam/dbdat/mongod\_27022  
\#各节点启动实例  
numactl --interleave=all /sam/soft/mongodb32/bin/mongod --config /sam/conf/mongodb/mongod27022.cnf  
\#复制集配置，启动，192.168.32.3为主节点  
ssh 192.168.32.3  
/sam/soft/mongodb32/bin/mongo --port 27022  
rsconf = \{  
\_id: “shard3”,  
members: \[  
\{\_id: 0,host: “192.168.32.1:27022”,priority:0,arbiterOnly:true\},  
\{\_id: 1,host: “192.168.32.2:27022”,priority:10\},  
\{\_id: 2,host: “192.168.32.3:27022”,priority:20\}  
\]  
\}  
\#复制集初始化  
rs.initiate(rsconf)  
\#检查复制集信息  
rs.conf()  
rs.status()

**3.各服务器分别配置configsvr**  
\#编辑配置文件  
vi /sam/conf/mongodb/mongod27019.cnf  
dbpath = /sam/dbdat/mongod\_27019  
port = 27019  
logpath = /sam/logs/mongodb/mongod27019.log  
logappend = true  
pidfilepath = /sam/run/mongodb/mongod27019.pid  
directoryperdb = true  
fork = true  
repairpath = /sam/dbdat/mongod\_27019  
syncdelay = 60  
maxConns = 10240  
profile = 1  
slowms = 100  
nohttpinterface = true  
oplogSize = 10240  
configsvr = true  
journal = true  
journalCommitInterval = 100  
storageEngine=wiredTiger  
wiredTigerCacheSizeGB=64  
wiredTigerCollectionBlockCompressor=zlib  
wiredTigerDirectoryForIndexes=true  
wiredTigerJournalCompressor=snappy  
wiredTigerIndexPrefixCompression=true  
\#创建数据目录  
mkdir -p /sam/dbdat/mongod\_27019  
\#启动实例  
numactl --interleave=all /sam/soft/mongodb32/bin/mongod --config /sam/conf/mongodb/mongod27019.cnf

**4.配置mongos**  
ssh 192.168.32.1  
\#编辑配置文件  
vi /sam/conf/mongodb/mongod27018.cnf  
port=27018  
logpath=/sam/logs/mongodb/mongod27018.log  
fork=true  
configdb=192.168.32.1:27019,192.168.32.2:27019,192.168.32.3:27019  
chunkSize=200  
maxConns=5000  
\#启动实例  
/sam/soft/mongodb32/bin/mongos --config /sam/conf/mongodb/mongod27018.cnf

**5.登陆mongos，初始化分片集**  
ssh 192.168.32.1  
/sam/soft/mongodb32/bin/mongo --port 27018  
use admin  
\#添加分片  
db.runCommand( \{ addshard:“shard1/192.168.32.1:27020,192.168.32.2:27020,192.168.32.3:27020”,name:“shardsvr1”\});  
db.runCommand( \{ addshard:“shard2/192.168.32.1:27021,192.168.32.2:27021,192.168.32.3:27021”,name:“shardsvr2”\});  
db.runCommand( \{ addshard:“shard3/192.168.32.1:27022,192.168.32.2:27022,192.168.32.3:27022”,name:“shardsvr3”\});  
\#检查分片集情况  
db.runCommand(\{listshards:1\})  
printShardingStatus()