redis使用Geo找出GPS位置最近的坐标

╰半夏微凉° 2022-10-15 14:58 315阅读 0赞

随着使用GPS坐标位置的手机或者设备越来越多，越来越多的应用使用gps坐标位置，为此redis增加了一种新的结构geo，可以很方便的计算最近距离的点。  
首先添加pom.xml的jar包依赖

<dependencies>
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter</artifactId>
            </dependency>
    
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-web</artifactId>
            </dependency>
            <dependency>
                
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-data-redis</artifactId>
            </dependency>
            <dependencies>
                <dependency>
                    <groupId>org.projectlombok</groupId>
                    <artifactId>lombok</artifactId>
                    <version>1.16.16</version>
                    <scope>provided</scope>
                </dependency>
            </dependencies>
    
            <dependency>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-starter-test</artifactId>
                <scope>test</scope>
            </dependency>
            <dependency>
                <groupId>org.projectlombok</groupId>
                <artifactId>lombok</artifactId>
            </dependency>
        </dependencies>

2、做一个添加坐标点，一个查询附近坐标点的查询方法

@RestController
    @RequestMapping("redisGeo")
    public class RedisGeoController { 
    
        @Autowired
        private RedisGeoService redisGeoService;
    
        private final String GEO_KEY="geo_key";
    
        /**
         * 使用redis+geo 上传位置
         * @param cityId
         * @param driverId
         * @param lng
         * @param lat
         * @return
         */
        @PostMapping("addDriverPosition")
        public  Long addDriverPosition(String cityId,String driverId,Double lng,Double lat){ 
            String redisKey= CommonUtil.buildRedisKey(GEO_KEY,cityId);
            long addnum=redisGeoService.geoAdd(redisKey,new Point(lng,lat),driverId);
            List<Point> points=redisGeoService.geoGet(redisKey,driverId);
            System.out.println("添加坐标点的位置"+points);
            return  addnum;
        }
    
        /**
         * 使用reidis+geo 查找附近司机位置
         * @param cityId
         * @param lng
         * @param lat
         * @return
         */
    
        @GetMapping("getNearDrivers")
        public List<DriverPosition> getNearDrivers(String cityId,Double lng,Double lat){ 
            String redisKey=CommonUtil.buildRedisKey(GEO_KEY,cityId);
            Circle circle=new Circle(lng,lat, Metrics.KILOMETERS.getMultiplier());
            GeoResults<RedisGeoCommands.GeoLocation<String>> results=redisGeoService.nearByXY(redisKey,circle,5);
            System.out.println("查询附近司机位置"+results);
    
            List<DriverPosition> list =new ArrayList<>();
            results.forEach(item->{ 
                RedisGeoCommands.GeoLocation<String> location=item.getContent();
                Point point=location.getPoint();
                DriverPosition position=DriverPosition.builder().cityCode(cityId).driverId(location.getName()).lng(point.getX()).lat(point.getY()).build();
                list.add(position);
            });
            return  list;
        }
    
    
    
    
    }

3、添加bean DriverPosition

import lombok.*;
    
    @Getter
    @Setter
    @Builder
    @NoArgsConstructor
    @AllArgsConstructor
    public class DriverPosition { 
        private String driverId;
        private  String cityCode;
        private  double lng;
        private  double lat;
    }

4、添加geo的service方法

import lombok.extern.slf4j.Slf4j;
    import org.springframework.beans.factory.annotation.Autowired;
    import org.springframework.data.geo.*;
    import org.springframework.data.redis.connection.RedisGeoCommands;
    import org.springframework.data.redis.core.StringRedisTemplate;
    import org.springframework.stereotype.Service;
    
    import java.util.List;
    
    @Service
    @Slf4j
    public class RedisGeoService { 
    
        @Autowired
        private StringRedisTemplate  redisTemplate;
    
        /**
         * 添加经纬度信息
         * redis 命令; geoadd key 120.223213 39.123123 "上海"
         * @param key
         * @param point
         * @param member
         * @return
         */
        public Long geoAdd(String key, Point point, String member){ 
            log.info((redisTemplate==null)+"====="); if(redisTemplate.hasKey(key)){ 
                redisTemplate.opsForGeo().remove(key,member);
            }
            return redisTemplate.opsForGeo().add(key,point,member);
        }
    
        /**
         * 根据key members批量获取坐标点
         *
         * redis 命令： geopos key 上海
         * @param key
         * @param members
         * @return
         */
        public List<Point> geoGet(String key, String... members){ 
            return redisTemplate.opsForGeo().position(key,members);
        }
    
        /**
         * 返回两个地方的距离，可以指定单位，比如：米m千米km，英里mi 英尺ft
         * redis 命令 ： deodist key 北京 上海
         * @param key
         * @param member1
         * @param member2
         * @param metric
         * @return
         */
        public Distance geoDist(String key, String member1, String member2, Metric metric){ 
            return redisTemplate.opsForGeo().distance(key, member1, member2, metric);
        }
    
        /**
         * 根据给定的经纬度，返回半径不超过指定距离的元素
         *
         * redis命令 georedius key 116.2323 39.123123123 100 Km WITHDIST WITHCOORDASC COUNT 5
         * @param key
         * @param circle
         * @param count
         * @return
         */
        public GeoResults<RedisGeoCommands.GeoLocation<String>> nearByXY(String key, Circle circle, long count){ 
            // includeDIstance 包含距离
            // includeCoordinates 包含经纬度
            // sortAscending 正序排序
            // limit 限定返回的记录数
            RedisGeoCommands.GeoRadiusCommandArgs args=RedisGeoCommands.GeoRadiusCommandArgs.newGeoRadiusArgs().includeDistance().includeCoordinates().sortAscending().limit(count);
            return  redisTemplate.opsForGeo().radius(key, circle, args);
        }
    
        /**
         * 根据指定的地点查询半径在指定范围内的位置
         *
         * redis命令 ： georadiusbymember key 北京 100 Km WITHDIST WITHCOORD ASC COUNT 5
         * @param key
         * @param member
         * @param distance
         * @param count
         * @return
         */
        public GeoResults<RedisGeoCommands.GeoLocation<String>> nearByPlace(String key,String member,Distance distance,long count){ 
            //includeDistance 包含距离
            //includeCoordinates 包含经纬度
            //sortAscending 正序排序
            //limit 限定返回的记录数
            RedisGeoCommands.GeoRadiusCommandArgs args=RedisGeoCommands.GeoRadiusCommandArgs.newGeoRadiusArgs().includeDistance().includeCoordinates().sortAscending().limit(count);
            return  redisTemplate.opsForGeo().radius(key,member,distance,args);
        }
    
        /**
         * 返回 geohash值
         * redis命令： geohash key 北京
         * @param key
         * @param member
         * @return
         */
        public  List<String> geoHash(String key,String member){ 
            return redisTemplate.opsForGeo().hash(key,member);
        }
    }

5、添加application.yml文件

spring:
      redis:
        host: 127.0.0.1
        port: 6379
    # password: redis2020
        database: 1

第二部分：测试

1、使用postman调用增加坐标的方法

http://localhost:8080/redisGeo/addDriverPosition?cityId=420000&driverId=000001&lng=114.366386&lat=30.408199
    http://localhost:8080/redisGeo/addDriverPosition?cityId=420000&driverId=000002&lng=114.365281&lat=30.406869
    http://localhost:8080/redisGeo/addDriverPosition?cityId=420000&driverId=000003&lng=114.368049&lat=30.412896
    http://localhost:8080/redisGeo/addDriverPosition?cityId=420000&driverId=000004&lng=114.365248&lat=30.537860

2.查看redis存的值  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3N1bnl1aHVhX2tleWJvYXJk_size_16_color_FFFFFF_t_70]  
注意：如果调用redis遇到

io.lettuce.core.RedisCommandExecutionException: ERR unknown command 'GEOADD'

错误，说明自己windows版本的redis版本太低，需要下载更新版本的redis，大家可以下载redis4或者redis5的版本，下载地址：  
[https://github.com/tporadowski/redis/releases][https_github.com_tporadowski_redis_releases]  
3、调用查看附近坐标点的接口，查看是不是距离最近的坐标  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3N1bnl1aHVhX2tleWJvYXJk_size_16_color_FFFFFF_t_70 1]

参考文章：https://www.cnblogs.com/xuwenjin/p/12715339.html

完整的工程代码：  
https://github.com/sunyuhuakeyboard/georedisdemo

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3N1bnl1aHVhX2tleWJvYXJk_size_16_color_FFFFFF_t_70]: /images/20221014/772621866bed4c84b9b83113699fec02.png
[https_github.com_tporadowski_redis_releases]: https://github.com/tporadowski/redis/releases
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3N1bnl1aHVhX2tleWJvYXJk_size_16_color_FFFFFF_t_70 1]: /images/20221014/dbb183cebf1746d889ff0d307f2e0dca.png