64位树莓派安装64位miniconda--实践发现没能装上2020.07.19

落日映苍穹つ 2023-02-28 04:11 2阅读 0赞

目前,没装成,大家暂时不用浪费时间.可能是版本不适合树莓派的arm架构再等等,提醒大家节省些时间,算一功德吧...

一.下载 Miniconda3-py38\_4.8.3-Linux-x86\_64.sh

[https://repo.anaconda.com/miniconda/][https_repo.anaconda.com_miniconda]

[https://repo.anaconda.com/miniconda/Miniconda3-py38\_4.8.2-Linux-x86\_64.sh][https_repo.anaconda.com_miniconda_Miniconda3-py38_4.8.2-Linux-x86_64.sh]

或国内源:

[https://mirrors.tuna.tsinghua.edu.cn/anaconda/miniconda/?C=M&O=D][https_mirrors.tuna.tsinghua.edu.cn_anaconda_miniconda_C_M_O_D]

[https://mirrors.tuna.tsinghua.edu.cn/anaconda/miniconda/Miniconda3-py38\_4.8.2-Linux-x86\_64.sh][https_mirrors.tuna.tsinghua.edu.cn_anaconda_miniconda_Miniconda3-py38_4.8.2-Linux-x86_64.sh]

二.安装

1.第一次安装,没成功,过程如下:

pi@raspberrypi:~/Downloads $ sudo /bin/bash Miniconda3-py38_4.8.3-Linux-x86_64.sh
    WARNING:
        Your operating system appears not to be 64-bit, but you are trying to
        install a 64-bit version of Miniconda3.
        Are sure you want to continue the installation? [yes|no]
    [no] >>> yes
    
    Welcome to Miniconda3 py38_4.8.3
    
    In order to continue the installation process, please review the license

上面有报不是64位,其实是64 位:

pi@raspberrypi:~ $ uname -a
    Linux raspberrypi 5.4.42-v8+ #1319 SMP PREEMPT Wed May 20 14:18:56 BST 2020 aarch64 GNU/Linux

然后,为读license,按了约122-124次回车键:

Do you accept the license terms? [yes|no]
    [no] >>> yes
    
    Miniconda3 will now be installed into this location:
    /root/miniconda3
    
      - Press ENTER to confirm the location
      - Press CTRL-C to abort the installation
      - Or specify a different location below
    
    [/root/miniconda3] >>> 
    PREFIX=/root/miniconda3
    Unpacking payload ...
    Miniconda3-py38_4.8.3-Linux-x86_64.sh: line 404: /root/miniconda3/conda.exe: cannot execute binary file: Exec format error
    Miniconda3-py38_4.8.3-Linux-x86_64.sh: line 406: /root/miniconda3/conda.exe: cannot execute binary file: Exec format error

不成功.

2. su root  
\# bash Miniconda3-py38\_4.8.3-Linux-x86\_64.sh

再次按了约124次回车,哦,其实不用数,按着不松,,,,换了几个版本的,最后都是一样结果提示.都没能装成功.暂时放一放.等针对树莓派的64位arm版本出来.

[https_repo.anaconda.com_miniconda]: https://repo.anaconda.com/miniconda/
[https_repo.anaconda.com_miniconda_Miniconda3-py38_4.8.2-Linux-x86_64.sh]: https://repo.anaconda.com/miniconda/Miniconda3-py38_4.8.2-Linux-x86_64.sh
[https_mirrors.tuna.tsinghua.edu.cn_anaconda_miniconda_C_M_O_D]: https://mirrors.tuna.tsinghua.edu.cn/anaconda/miniconda/?C=M&O=D
[https_mirrors.tuna.tsinghua.edu.cn_anaconda_miniconda_Miniconda3-py38_4.8.2-Linux-x86_64.sh]: https://mirrors.tuna.tsinghua.edu.cn/anaconda/miniconda/Miniconda3-py38_4.8.2-Linux-x86_64.sh