STM32驱动模数转换芯片ADS1120（基础知识篇）第1篇

「爱情、让人受尽委屈。」 2021-12-12 06:13 812阅读 0赞

1. 先看下ADS1120的结构图，ADS1120是个比较奇葩的ADC模数转换器，因为比较适用于热电阻之类的温度采集器。看下图，有个MUX多路复用器，应该是选择两个差分信号去测试，通过输入多路复用器 (MUX) 实现的两个差分输入或四个单端输入，一个低噪声可编程增益放大器 (PGA)，PGA，内部 PGA 提供高达128V/V 的增益。此 PGA 使得 ADS1120 非常适用于小型传感器信号测量 应用 ，例如电阻式温度检测器(RTD)、热电偶、热敏电阻和桥式传感器。

![1300009-20190607213555557-358175482.jpg][]

2. 看下寄存器，4个寄存器

![1300009-20190607221314989-925385659.jpg][]

3. 命令

![1300009-20190607221420020-1688631762.jpg][]

4. 参考例程

VOID main(VOID) { signed long tData; WDTCTL = WDTPW + WDTHOLD;        // Stop watchdog timer
        Init_StartUp();                 // Initialize device
        ADS1220Init();                    // Initializes the SPI port pins as well as control
        ADS1220Config();                // Set base configuration for ADS1x20 device
        while(1) { /* Add specifc command for reading and writing ADS1220 here */
            /* dFlag is set in the interrupt service routine when DRDY triggers end of conversion */
            if (dflag)                        /* check if new data is available */ { tData = ADS1220ReadData();    /* get the data from the ADS1220 */ dFlag=0; } /* other routines could be added here, such as change the mux setting */ } /* end of while(1) */ } /* end of main() */

其中配置函数比较重要，如下是1增益，也是就不变，然后ADS1220\_MUX\_0\_G=0x80

void ADS1220Config(void) { unsigned Temp; ADS1220ReadRegister(ADS1220_0_REGISTER, 0x01, &Temp); /* clear prev value; */ Temp &= 0x0f; Temp |= ADS1220_MUX_0_G; /* write the register value containing the new value back to the ADS */ ADS1220WriteRegister(ADS1220_0_REGISTER, 0x01, &Temp); ADS1220ReadRegister(ADS1220_1_REGISTER, 0x01, &Temp); /* clear prev DataRate code; */ Temp &= 0x1f; Temp |= (ADS1220_DR_600 + ADS1220_CC);        /* Set default start mode to 600sps and continuous conversions */
        /* write the register value containing the new value back to the ADS */ ADS1220WriteRegister(ADS1220_1_REGISTER, 0x01, &Temp); }

ADS1220\_MUX\_0\_G=0x80，那么看下寄存器，什么意思呢？就是测量AIN0引脚的电平，得出一个结论，如果要想测量4个通道，那么需要依次次修改MUX\[3:0\]，一个测量完再测试另外一个

![1300009-20190607221632601-1175677004.jpg][]

读数据，这个例程比较简单，只测量了AIN0的电压，我们的应用是需要做2线PT100铂电阻温度测量，所以需要继续

long ADS1220ReadData(void) { long Data; /* assert CS to start transfer */ ADS1220AssertCS(1); /* send the command byte */ ADS1220SendByte(ADS1220_CMD_RDATA); /* get the conversion result */ Data = ADS1220ReceiveByte(); Data = (Data << 8) | ADS1220ReceiveByte(); /* sign extend data */
       if (Data & 0x8000) Data |= 0xffff0000; /* de-assert CS */ ADS1220AssertCS(0); return Data; }

转载于:https://www.cnblogs.com/429512065qhq/p/10989382.html

[1300009-20190607213555557-358175482.jpg]: /images/20211211/2c2058770ec14487bf296cda5524114e.png
[1300009-20190607221314989-925385659.jpg]: /images/20211211/026ee3810c1c43f683e023c7af172d95.png
[1300009-20190607221420020-1688631762.jpg]: /images/20211211/a4364e9d51704dd6a7d1fda649143c7e.png
[1300009-20190607221632601-1175677004.jpg]: /images/20211211/b6ace2027a4b4cfb82177952e583f3c3.png